Hand rubbing nuclear fusion live in the wilderness

Chapter 476 Drawing Controlled Fusion Reactor Blueprints
After a brief introduction about the 'primary magnetic field anti-gravity engine', Won came to the large-scale 3D printing factory that had completed construction, and started debugging and acceptance.

The things produced by the system have always been high-quality products, which have been verified by time.

But even so, Han Yuan arranged for Xiao Qi and Xiao Ling to check all the 3D printing equipment, and asked each printing equipment to print something to confirm that the equipment is in good condition.

For a while, the printing equipment in the 3D printing factory started up under the control of two artificial intelligences.

If it wasn't for noon, the efficiency of the solar power arrays by the lake would be at its best, and it might not be able to supply the power needed for the operation of so many devices.

Arrange the X-1 industrial robot to send the printed materials and parts to the inspection center, and use the infrared scanner, elemental analyzer and other equipment inside to inspect the quality of the finished product.

Today, all kinds of industrial equipment in the entire base have basically become intelligent after undergoing several upgrades and transformations.

Not only can it be controlled manually, but it can also be controlled by artificial intelligence. If there is neither, you can also set the running program and let it run by itself.

Such equipment requires very little manpower.

It took three days for the various equipment in the testing center to complete the testing of printing materials and various printed parts.

The test results are as perfect as ever, and the technology provided by the system, as long as there are no problems when it is reproduced, there will be basically no problems.

After confirming that there is no problem in the large-scale 3D printing factory, Han Yuan immediately started the processing program of the X-1 industrial robot that had already been written.

Various processing materials that have been prepared, such as various alloy printing powder materials, thermoplastics, trialuminum titanium holmium-diyttrium-ammonia carboxyl complex materials, etc., these materials are sourced from the storage warehouse through the material pipeline according to demand Continuously send each printing device, and then become the parts of the industrial robot.

When printing an industrial robot for the first time, Han Yuan took the audience in the live broadcast room to squat in the printing factory to watch, showing everyone how terrible the processing efficiency of a large-scale 3D printing factory operating at full capacity is.

In just two days, all parts of an X-1 industrial robot lacking lithium-sulfur batteries, core control chips, and magnetic bearing joints were completely printed out, and only needed to be assembled in the assembly factory. This industrial robot is ready for use.

The assembly of parts is a small problem for an assembly factory with many assembly arms. There are enough parts, and it can complete all the assembly work in just two hours.

[Tsk tsk, this printing speed looks slow, but it is actually fast. In two days, one printing device can complete the printing of one robot. 】

[Sows are not so efficient in giving birth. 】

[That's it, if an artificial intelligence rebellion really happens, how can humans fight against it?horrible. 】

[One 3D printing device can complete the production of one robot in two days, and if five hundred are built, two hundred and five can be produced in one day. 】

[Good one two hundred and five_]

[This is not producing industrial robots!This is obviously Skynet's mass-produced Terminator! 】

[Obviously it's Tex at the beginning of StarCraft 2 Wings of Liberty! 】

[War Skynet does not need to build robots, it is itself countless boson-level intelligent matter. 】

[Young people should not always surf the Internet, play games, or post something to talk about, but read more books and increase their knowledge. If you don’t believe me, read the following words: Fuck, 觌氅, 饰鼗, 草磲, 蕤颥, Sole lizard, minnow mullet, minnow mullet, tapir mullet, scorpion, scorpion.Did you find that you can do nothing but shit? 】

【Fuck! 】

[To be honest, with this kind of production technology, all kinds of things in the future will be much cheaper. 】

[Upstairs you are thinking about farts, the capitalists will be cheaper?They'd rather dump the milk than sell it to you for cheap. 】

[Refer to the previous Great Depression, if you really dump it, you won’t be given it. 】

The speed at which the large-scale 3D printing factory produced the X-1 industrial robot amazed the audience in the live broadcast room.

In two days, a robot can be printed out. Although it is printed 24 hours a day, even though it lacks chips, batteries, magnetic bearing joints and other things, this efficiency is really terrifying.

You must know that it took at least half a month to produce such an industrial robot in the past, even with various CNC equipment for processing.

After all, there are many types and quantities of various spare parts, and the production itself takes a lot of time. There are also various assembly processes. It is actually very fast to be able to complete the production of an industrial robot in [-] days.

And this is based on the fact that there are several "MSC-CNC eight-axis six-linkage CNC processing equipment" in the CNC factory that can process at the same time.

If it is just a CNC equipment, I am afraid that this time will have to be extended to about two months.

Now, a 3D printing equipment can be completed in two days and 48 hours when the raw materials are sufficient.

Compared before and after, the efficiency has been improved by more than ten times.

Such a terrifying industrial production efficiency shocked not only the audience in the live broadcast room, but the frightened group of people from all over the world gasped.

At present, the production efficiency of 3D printing factories can directly eliminate most of the assembly lines in the whole society.

Of course, the premise is that the manufactured equipment and parts can be printed, and the quality of the printed parts and equipment meets the requirements.

These two points determine whether the 3D printing factory can replace the current assembly line production method.

However, as far as the current situation is concerned, it is no problem that 3D printing factories can replace most of the assembly line production.

The most difficult metal printing material problem, the anchor in front of them has solved it for them.

The metal powder called trialuminum titanium holmium-diyttrium-ammonia carboxyl compound material has also been tested in various countries, and it can almost perfectly sinter the metal printing powder to improve the physical properties of the printed parts.

Although the performance is not as good as that of casting and CNC machined metal parts, the reduction is not much, and the performance is sufficient for ordinary equipment.

From this point of view, there are still a lot of assembly line production that can be replaced, such as some commonly used home appliances, household items, etc., if printed as a whole, the strength will be improved because there is no splicing.

However, there are still more things that countries need to consider than the Korean won. Today's assembly line production is mostly controlled by workers.

If it is replaced hastily, the unemployment problem of workers will be more serious.

After the large-scale 3D printing factory was launched and began to produce X-1 industrial robots at full capacity, the Korean won no longer cared about it.

Counting the time, the reactor building in the controlled nuclear fusion park should be completed, and it's time to go there again.

Thinking about it, Han Yuan rode on a small electric donkey and returned to the controllable nuclear fusion park again.

The X-1 industrial robots that were carrying equipment in various buildings last time have all disappeared, and all industrial robots have all assembled in the reactor building.

Han Yuan pushed open the door of the factory building, just in time to meet a robot carrying materials and taking the elevator to the high-rise construction.

One person and one robot are crowded in the elevator full of construction materials, and they rise up with the operation of the elevator. The style of painting looks a bit strange.

However, Han Yuan and the audience in the live broadcast room didn't care about this kind of thing. On the contrary, the audience in the live broadcast room were still trying to tease the robot in the elevator through the barrage.

It's a pity that although they knew that Han Yuan could see the barrage, they didn't know that only he could see the barrage.

"Xiaoqi, tell me how the reactor building is being completed and when it will be completed."

As the elevator went up, Han Yuan called Xiao Qi.

"Master, there are still seven rooms on the seventh and eighth floors that have not completed the final construction, three on the seventh floor and four on the eighth floor. The estimated time to complete the construction is around six o'clock tomorrow afternoon."

Soon, Xiao Qi's voice sounded in the elevator, and following Xiao Qi's voice, the elevator stopped on the seventh floor, and the industrial robot inside carried the materials and walked out.

Han Yuan thought for a while, stepped out of the elevator and followed.

Following the X-1 industrial robot, Han Yuan and the audience in the live broadcast room came to a room where construction was not completed.

It is said to be a room, but this room is larger than ordinary rooms, and even larger than ordinary villas, covering an area of ​​nearly a thousand square meters.

The door of the room hadn't been installed yet, and Han Yuan walked in with his shooting equipment to take a look. The room under construction was actually not messy.

More than a dozen industrial robots are distributed in every corner of the room, constantly filling the empty room with various materials.

Some are decorating walls, some are wiring, some are laying pipes, and some are constantly transporting various materials. Countless jobs are mixed together and started at the same time. Not only is there no chaos, but it is carried out in an orderly manner under the control of core intelligence with.

The only problem is that the art style can look a little weird.

It's not that there are no construction robots, but such humanoid ones are quite rare.

Of course, the more important thing is that these industrial robots have no skin, and the whole body reflects a silver-white metallic luster, and the various lines and pipes look quite obvious.

And because it has been under construction for a long time, these robots are more or less covered with some paint, pigment, cement and the like, which looks even more strange.

A group of robots are repairing the house. Even though they have seen this scene many times before, the audience in the live broadcast room can't help but keep complaining.

[This picture feels weird every time I look at it. 】

[When I was young, my teacher said that I couldn’t study well and I had to go to the construction site to move bricks when I grew up. Now I have to move bricks on the construction site and I will lose my job. 】

[Hahahaha, there is no future for moving bricks. 】

[In the past, capitalists were in arrears with wages to workers, and later it was robots who were in arrears with engine oil. 】

[Hahahaha, laughing to death, being forced to work overtime without paying electricity bills]

[I remember that Country Garden used robots to build houses, it seems. 】

【Don’t mention Country Garden, I regret buying a set, it’s like building the worst house with the most dazzling gimmicks, and sending you to the fastest west. 】

Han Yuan didn't stay in the reactor building for a long time, he came to check the overall construction situation and then left.

The day passed quickly, and the next afternoon, Xiaoqi sent the news that the construction of the controllable nuclear fusion park had been completed.

At the same time, there was also an actual survey drawing of each building in the park.

After getting the survey map, South Korea began to customize the controllable nuclear fusion reactor and supporting power generation device based on the actual survey data.

The reason to wait until the actual survey drawing is because the actual survey drawing is one of the basis for drawing the general floor plan of the building.

And most importantly, if there is no survey drawing, the relationship between the elevation and absolute elevation of each building cannot be marked on the general drawing, nor can the coordinates of each building be marked.

The more complex the building, the more precise the requirements for each coordinate in the building.

In particular, the controllable nuclear fusion reactor and the supporting power generation device are extremely high-tech and complex things, and there are certain requirements for the storage point of each piece of equipment.

Not only the requirements for space, but also the requirements for surrounding supporting equipment.For example, a series of supporting buildings and equipment such as water and power supply, fire protection, escape routes, and auxiliary control switches need to be taken into consideration.

The controllable nuclear fusion technology in his hand was left to him by the former host of Taishan base.

A lot of things have been deleted from the data, and the remaining building information is based on the Mount Tai base.

In the Amazon rainforest base, it is impossible for Korean won to make the building the same as the Taishan base.

First of all, not to mention whether it is possible, just because the Amazon rainforest base has a much greater demand for electrical energy than the Taishan base, this prevents him from designing it the same.

Because the Taishan base is just a living base, and the Amazon rainforest base is an industrial base, the power consumption of the two is completely different.

Here, he needs to expand the scale of the controllable nuclear fusion reactor so that it can provide more power.

To provide more power, expanding the scale of controllable fusion reactors is the best way.

In the workshop, with the help of a projector and a drawing pen, South Korea began to draw the blueprint of the controllable nuclear fusion reactor.

Although the controllable nuclear fusion technology is in his mind, due to the change of the building, many things in the reactor and power generation equipment need to be redesigned, and it is not just a simple enlargement.

Of course, this is not very difficult for Won. He has already mastered the relevant technologies, and it is not a problem to make some adjustments.

What's more, he had already completed this work in the past few months, and now he only needs to reproduce it.

If it is not for bringing this technology to the real world, he can directly use the brain wave signal reader to export it completely, and then modify it.

But if you do this, the countries will still learn a p. He didn't talk about it in detail before, but only talked about some key points. Now he doesn't even let people see the design drawings and drawings. That would be too deceitful.

(End of this chapter)