Let You Build A Fuel-Efficient Car, You Build A Super Electric Car?

With the number on the instrument, it keeps increasing.

The R&D engineers present also concentrated their attention.

"1000MPa..."

*2000MPa..."

"3000MPa....."

"4000MPa..."

When the test strength reaches the strength of 4000MPa.

These R&D engineers suddenly widened their eyes!

The memory alloy in front of him is actually comparable to ordinary high-performance carbon fiber in terms of strength.

"5000MPa....."

"6000MPa..."

When the instrument will squeeze and stretch the pressure to "6500MPa".

This highest-strength carbon fiber "IM10" produced by Yingguo Hexcel suddenly made a clicking sound, and a crack broke out from the middle!!

Click!!

The instrument is pressurized to "6800MPa", and the carbon fiber material is completely broken and damaged!!

The faces of the people present were shocked!

"Look, the pressure increased to nearly 7000MPa, and even Hexcel's IM10 collapsed. Under such a strong tensile force, this alloy only produced a slight deformation.

"What? The strength of this alloy is so terrifying..."

"It's still increasing, I'll go..."

Zhang Liqun gasped!

1 MPa is equal to 10 kilograms of pressure, and this piece of Hexcel high-strength carbon fiber was equivalent to withstanding 30 tons of high pressure before it collapsed.

And the strong compressive tensile force that this alloy can withstand is still increasing.

"8000MPa..."

"9000MPa..."

Every time the numbers on the instrument beat, their hearts couldn't help but twitch!!

finally.

The pressure came to "9500MPa".

The nickel-titanium memory alloy of the aircraft seemed to be overwhelmed, and a huge deformation occurred!!

"stop!!"

at this time.

Chen Zhou shouted to stop.

The instrument stopped immediately.

Chen Zhou nodded in satisfaction and said with a smile:

"Everyone, do you think this compressive strength and this weight are suitable for the body material of a supercar?"

Technical issues, data speak.

This wave of test data.

It directly stunned all the R&D engineers who came to participate in the R&D project.

"I rely on!!!"

"It's... so competent."

"With the weight and compressive strength of this alloy, if it is used to make the body of a supercar, it can completely surpass the composite carbon fiber materials currently used on all supercars!!"

"Scary!!"

"The technology mastered by Kunlun is too scary!!"

These people completely put away their previous contempt.

Kunlun's technology simply opened their eyes.

Chen Zhoudao: "Next, let's test the second characteristic of nickel-titanium memory alloy, in addition to its own strength, it also has super recovery.

The biggest characteristic of memory metal is that it can be automatically restored when subjected to high temperature.

This is due to the structural symmetry of the particles of the memory metal itself. After being processed into an ordered structure, even if it is stretched into an irregular shape at room temperature, it will gradually recover as long as it is heated at a high temperature. The previous "steady state".

The aviation-grade nickel-titanium memory alloy produced by the system has a nano-particle structure stability that is several times higher than that of other memory metals. Not only that, but even its "heat metamorphosis" temperature is the number of ordinary memory metals. more than double.

I see.

The piece of aviation-grade nickel-titanium memory alloy in front of me has been completely deformed by the super pressure.

But soon.

Moved to another workbench by the mechanical arm for gradual heating.

As the temperature reaches 300 degrees.

The aviation-grade nickel-titanium memory alloy in front of me began to slowly recover itself.

And when the temperature continues to heat up, as high as 500 degrees later.

This self-healing phenomenon begins to accelerate further.

finally.

After ten minutes of heating.

Seeing that this piece of aviation-grade nickel-titanium memory alloy has recovered nearly half of its original shape by itself.

The faces of the people went crazy and shocked!!

"More than 70% self-healing capacity..."

"You know, the strong pressure test just now has reached the limit of this piece of memory alloy, and it is close to completely destroying it. How can it still have such a strong resilience?!!"

"This kind of technology is unheard of..."

"It is said that Yingguo has a nickel-titanium nano-alloy, which is used to make the most expensive cardiovascular stent in the human body. Its recovery ability is amazing, but it has not reached this level...

"hiss!!!"

Ordinary memory metals suffer from deformation, although they can recover by heating themselves.

But the self-recovery here refers to how much memory metal can be recovered after being destroyed to the point of being completely on the verge of destruction.

No matter how stable the structure of the memory metal is.

But after all, there are still metal fatigue and load-bearing limits.

As for general memory metals, in the case of complete destruction, the overall recovery of 30%-40% is quite good.

What is the concept that this alloy can achieve 70% damage recovery?

Only the "liquid metal" in the movie can do the kind of complete destruction that can be restored 100%.

Second only to legendary technology!!

They get it now.

Why did you sign an agreement with such a high liquidated damages?

After reading.

I just feel that the 100 million liquidated damages is still conservative by Kunlun.

Everyone swallowed their saliva continuously.

My whole body was shaking with excitement!!

They have thought of various uses for the material.

"If this alloy is used to make the body of a supercar, wouldn't the supercar be able to restore itself?"

"With such a powerful recovery ability, even if the car body is dented in a normal collision, it only needs to be heated and repainted after recovery."

"Not only can it achieve the ultimate lightweight, but it can also have the legendary self-repairing ability. If this supercar is built, I'm afraid it will drive the world's top rich people who are keen on pursuing a sense of technology completely crazy!!!"

"It's unimaginable that I can actually participate in this kind of project..."

Before.

Kunlun said that it will build a supercar that breaks the world record.

They are still whispering in their hearts.

Think it's an impossible thing.

And now.

Just after seeing the materials used to make the body.

Their thinking has undergone earth-shaking changes.

Using this alloy material, if you can’t build a supercar that breaks the world record, you’re a pig!!

Everyone was extremely curious, just like a cat scratching.

According to the current test data, even if it is used in the aerospace field, there is no problem at all.

Proper black technology!!

How did Kunlun develop this alloy material? What is the cost?

But this kind of question, they can't ask.

Otherwise it is a violation of the confidentiality agreement.

"Chen Gong, can we start researching and designing now?"

Zhang Liqun asked.

Since you can't ask.

Just leave this irrelevant thing behind.

Because now.

They thought of being able to personally participate in the R&D and design of this supercar.

I can't help but get excited!!

Chen Zhou said with a smile: "No hurry, everyone first familiarize themselves with the characteristics and customer parameters of aviation nickel-titanium memory alloys.

Those present are rare talents.

Chen Zhou didn't want them to miss some manufacturing details because they were too excited.

Only when you know the materials well, you can use the design to best play the characteristics of the materials.

This is in the car industry. Very particular.

for example.

As I said before, the all-aluminum alloy chassis is quite popular among high-end models.

However, the design of the support rod and the H arm in the chassis parts is also divided into forged aluminum and cast aluminum.

These two aluminum alloy parts.

In terms of materials science.

Forged aluminum is denser, making the overall structure stronger.

Logically speaking, the chassis is all forged and pressed aluminum, which is the most costly and the best.

However, in Kunlun's flagship model Qinglong, the rear suspension is made of cast aluminum.

Because the density of cast aluminum is lower than that of wrought aluminum, the material is slightly softer.

Utilizing the different strengths of the two materials, the toe angle of the rear wheel and the front wheel can produce stress changes when the car is cornering.

In human terms.

That is, the front is hard and the back is slightly soft, which can improve the maneuverability when turning and cornering.

It is this careful change in material design that can maximize the mechanical performance of the car.

Just when everyone was still amazed by this.

Chen Zhou said again:

"Those who participate in the design of the powertrain can take a look first, our latest generation of motors, super permanent magnet motors..."

"This is the heart of our power composition, and also the soul of the vehicle's acceleration!!"

Everyone was taken aback.

Super permanent magnet motor??

Isn't the Kunlun equipped with the industrial motor that can wrestle with the 12-cylinder engine before?

The other side of the R&D department.

The "super permanent magnet motor" that has been manufactured is also undergoing intensive testing.

An industrial motor.

It's not that once it's manufactured and mounted on a car, it's over.

The entire power system has to undergo extremely strict tuning.

for example.

In different power curves, to increase the energy efficiency ratio and solve the output delay of the power system, it is necessary to go through a long test and optimization by the R&D personnel to achieve the best.

When these R&D personnel came to the site for testing the super permanent magnet motor.

What catches the eye is a mechanical beast full of fury!!

The whole body is silver and white, and it is a performance monster composed of sophisticated mechanical and electronic components!!

Each gear design is full of high-end sense, in line with industrial logic, the internal shaft and complexity are even more complicated than the industrial motor they saw before that was installed on the Qinglong model!!

"Super permanent magnet motor... Could it be said that this motor has a higher performance than the industrial motor that you installed on your flagship model before?!!"

Zhang Liqun couldn't help but said in shock.

Kunlun's previous flagship model, the motor on it, in their opinion, is already extremely powerful!!

Equipped on the chassis, it is enough to create a supercar.

Unexpectedly.

Kunlun is so fast, it has a new generation of motors!!

Chen Zhou said: "Yes, compared with the previous one, this super permanent magnet motor has a special internal design that not only strengthens the heat resistance of the permanent magnets, but also changes the structural design. , the rotor will not disintegrate due to the super strong centrifugal force...."

During the conversation.

Press the button directly.

The test of the motor is started.

boom!!!

Unlike the growl of a twelve-cylinder engine.

This super permanent magnet motor full of fury is spinning crazily inside!!

Everyone's eyes widened!!

Watching the speed displayed on the instrument soar crazily!!

"Twenty thousand revolutions, twenty-five thousand revolutions..... Thirty thousand revolutions.... Thirty-five thousand revolutions..."

"Output power 450kw......!!!"

at this time.

This group of R&D designers has already become numb!!

Kunlun repeatedly breaks their understanding of technology!!

Now they are shocked to the point of numbness!!

Is this really a domestic car manufacturer?

how do they feel...

Take these technologies abroad.

In the top-secret research and development rooms of those top supercar manufacturers, pressure regulation can be formed!!!

Chen Zhou said: ". "Currently, the working range of this super permanent magnet motor is 35,000 revolutions, and the output power is 450kw.

It can reach up to 40,000 revolutions, and the output power will reach 480kw, but this will damage the life of the motor to a certain extent, so we only tested it in engineering mode...."

The "Super Permanent Magnet Motor" has been excavated by the R&D department, and the upper limit of the output power has been further improved.

Of course, when this upper limit is reached, there will be damage due to exceeding the rated power of the system.

But it was shocking enough to make your scalp tingle!!

"This should be the strongest industrial motor on the surface?"

"Forty thousand revolutions, all I can say is horror!!"

"How many sets of permanent magnets are there? Could it be that there are more than eight sets?"

"Powerful!! Invincible!!!"

Several people's eyes straightened, and they murmured.

No R&D personnel can refuse the temptation of "the strongest industrial motor on the surface"!!

It's amazing to be able to tune this "strongest motor on the surface" by yourself!!!

office.

"How about the R&D personnel from the three companies? Is the R&D progress going smoothly?"

Li Ming asked.

He is very concerned about the research and development projects of supercars.

After all, they are R&D personnel of other companies. Even if they have high professional attainments, they don't know whether their work enthusiasm is strong or not.

"Boss, the R&D department reported that the batch of R&D engineers who came over were very enthusiastic about their work, and now they are a bit sleepy and forgot to eat and sleep. They didn't even stay in the arranged hotel, and almost slept in the R&D room.

Ministry of Development, said to build an unparalleled supercar!'

Reported by Chen Shuanghui.

"That's great, it's not in vain for us Kunlun to pay an extra overtime pay."

Li Ming chuckled.

Confidence, what can hit people is not only money, but also technology and honor!!

And Kunlun, in these two aspects, will not treat these R&D personnel badly, and will naturally reap rewards.

It seems that the next research and development process should be very smooth.

Time flies.

Just ten days passed.

Chang'an headquarters.

(It's good) Wang Fu has been in a very good mood during this time.

The hybrid version of the Tank 300 started pre-sale soon after the release of the PPT.

And the orders harvested directly exceeded 15,000!!

Pull the tank 300, a model whose sales have been cut in half due to high oil prices, directly back to the peak level!!

And even beyond!

and.

Kunlun's first batch of batteries has also been supplied.

Only after the adjustment of the internal production line is completed, the delivery can be started.

"Calculating the time, it's time to ask about the situation."

Wang Fu quickly thought of the two top engineers sent to Kunlun on a business trip to participate in the research and development project.

I said before that it will take about ten days and a half months, and I can come back after the project is completed.

Wang Fu called directly.

at this time.

Kunlun R&D Department.

Zhang Liqun excitedly looked at the test data in front of him!!

Although there is fatigue in the eyes, it is difficult to hide the fanatical mood.

The phone rang suddenly.

Wang Fu's voice came.

"Hey, Mr. Zhang, how is your stay in Kunlun? When will the R&D project come back?"

this word.

Zhang Liqun was taken aback.

Unexpectedly, my time in Kunlun would be ten days so soon.

Simply too short!!

Zhang Liqun looked in front of him and faced the boss's questioning. If he left early, he would definitely regret it for the rest of his life!

"Boss, I want to apply to stay in Kunlun for an extra half a month. The time for a business trip is not enough to make the project perfect......"

Think about it.

Zhang Liqun said.

"What? Stay in Kunlun for another half a month?"

When Wang Fu heard this, he was stunned!!

what's going on?

Traveling to other companies, still not enough?

at this time.

The same thing is happening to the other two Yan.

"Boss, I want to apply to continue staying in Kunlun."

"Boss, I have to finish this project. Even if the company has something to do, I can only temporarily put it on hold!!"

reply received.

The bosses of Geely and Chang'an are dumbfounded!!

Fuck??

What is the magical power of this Kunlun??!!.