Siheyuan: Fusion of 129600 Selves

The processing accuracy of an eighth-level fitter is about 0.005 mm, or 5 microns.

1 millimeter equals 1000 micrometers.

Zhang Jianghe's processing accuracy can reach 0.1 microns, which is much better than that of an eighth-level fitter.

Longguo divides fitters, forgers, welders and other occupations into eight levels, with level one being the lowest and level eight being the highest.

The Great Zhoutian Fusion System divides the skills of fitter, forger, welder, carpenter, lathe operator, riveter, and repairman into five levels, namely primary, intermediate, advanced, master, and grandmaster. Primary is the lowest and grandmaster is the strongest.

Zhang Jianghe's fitter skills are better than those of an eighth-level fitter. There are two main reasons for this. First, his control over his body strength far exceeds that of ordinary people. Second, his vision, sense of touch, etc. are also far superior to ordinary people.

A senior fitter has accurate eyes and steady hands. If his eyes are not accurate, the size will be too large or too small. If his hands are not steady, a single file will ruin the part.

There are many tools and processing methods involved in fitter work. To put it simply, the main job of a fitter is to process qualified parts according to drawings. In addition, fitter work is also involved in machine assembly.

After finding some raw materials, Zhang Jianghe started making chips.

Gold is processed into 1 micron diameter wires for use in chip circuits...

After spending a lot of time and effort, the chip he made did not reach the 100-nanometer level.

"Materials and tools limit my technology. Otherwise, I would definitely be able to make a 100-nanometer chip."

By using a layer-by-layer stacking method, Zhang Jianghe has created a chip that is as big as a fist.

“It’s a little big, but the operation procedure is simple and the quality should be good.”

Let the mental clone make more chips, and Zhang Jianghe devoted himself to processing various parts.

His physical strength increased to 4.0, and he could lift four thousand kilograms.

For the same part, other fitters might take two or three days, but he only needs a dozen minutes.

With accurate eyes and steady hands, one cut can replace countless cuts, and the precision of parts can reach 0.1 micron level.

Zhang Jianghe, who has restrained his strength, has controlled the precision of parts to 0.5 microns, which is approximately one-tenth of that of an eighth-level fitter.

It took more than two months for Zhang Jianghe to manufacture the first five-axis CNC lathe.

"The industrial machine tool I made was about five years earlier than the foreign five-axis linkage machine tool. My five-axis linkage CNC lathe is more than one level better than the first five-axis linkage CNC machine tool made by foreigners."

After trying out the homemade five-axis CNC lathe, Zhang Jianghe felt a great sense of accomplishment.

He left the workshop and came to Wang Xinghua's office.

"Jiang He, is there any good news?" Wang Xinghua seemed to be thinking about something.

"The second-generation machine tools I developed have been completed. The previous machine tools can be donated to research institutes." Zhang Jianghe said with a smile.

"Come on, take me to see it." Wang Xinghua couldn't wait.

Many research institutes were envious of the first generation of CNC machine tools manufactured by Zhang Jianghe.

The first generation of CNC machine tools include CNC lathes, CNC milling machines, CNC punching machines...CNC drilling machines. They only made certain modifications based on imported machine tools to achieve simple CNC operations.

"What does this machine do?" Wang Xinghua looked at the brand new behemoth.

"Ordinary machine tools only have three axes, but my machine tool has five axes..." Zhang Jianghe introduced while pointing.

A toy was made using a CNC machine tool, and Wang Xinghua was stunned.

The next morning, trucks arrived at the Longlin workshop.

The first generation of CNC lathes and instruction manuals were taken away, but the second generation of five-axis CNC machine tools remained.

There are five-axis linkage CNC machine tools that can continuously produce parts for five-axis linkage CNC machine tools.

Longguo does not have the ability to produce parts such as chips for the time being, so Zhang Jianghe had to let his mental clone do it himself.

At his suggestion, a research institute was added under Long Lin's command.

The five-axis linkage CNC machine tool can achieve a processing accuracy of 1 micron, which exceeds the upper limit of the processing accuracy of an eighth-level fitter.

The processing accuracy of an eighth-level fitter is about 5 microns, or about 0.005 mm.

All parts that the eighth-level fitter is unable to process are sent to Longlin and processed using five-axis CNC machine tools.

Using five-axis CNC machine tools, Zhang Jianghe manufactures CNC milling machines, CNC drilling machines, CNC grinding machines, CNC punching machines...

He personally processes the parts produced by the five-axis CNC machine tool, which can greatly improve the precision of the parts.

The processing accuracy of new CNC milling machines, CNC drilling machines, and CNC punching machines can reach 1 micron level.

......

The public-private partnership officially began, and the government bought most of the shares of factories, shops and restaurants.

Lou Zhenhua of Zhenhua Steel Rolling Mill took the initiative to request public-private partnership.

For various reasons, many wealthy businessmen began to sell off their properties and planned to leave with their families.

A courtyard house that originally cost two or three hundred million yuan can now be bought for twenty or thirty million yuan.

Zhang Jianghe, who originally didn't want to buy a house, couldn't help but be tempted.

He didn’t want to buy a house before because he was too weak and worried that he wouldn’t be able to withstand the wind.

Now my strength has increased countless times, and I also know a lot of big guys.

Who can say anything if I use legal income to buy a courtyard house?

For more than half a month, Zhang Jianghe was looking for a courtyard house.

"The total area is about 9,800 square meters, located in the Second Ring Road. By the 21st century, it will be worth at least tens of billions."

There are many courtyard houses in the northern part of the city with an area of ​​more than 10,000 square meters, and there are even more courtyard houses with an area of ​​only a few hundred square meters.

After finding the owner of the courtyard house, Zhang Jianghe used 80 million dragon coins to buy the courtyard house.

The original owner found someone and completed the formalities easily.

The money earned from fishing and hunting is all legal income, and Zhang Jianghe is not afraid of being investigated.

The star coins he donated are worth tens of millions. What does it matter if he uses his legal income to buy a courtyard house?

If he had been a little thicker-skinned and asked his superiors for the Hefu, his success rate would have been at least 90%.

The house is well maintained and needs no repairs, so it is move-in ready.

After taking a look at the furniture in the courtyard, Zhang Jianghe was pleasantly surprised.

The materials of the furniture are almost all golden nanmu and huanghuali.

Some of the furniture is made of rosewood, and the huge solid wooden capitals and beams are all made of golden nanmu.

There are many courtyard houses in the north city, and the first owners were princes of the previous dynasty and the dynasty before that.

The materials used in the prince's house cannot be bad. If it is dismantled into parts and sold for billions, it will not include the land price.

In the previous life, one capital of the Prince Gong Mansion was worth 2.7 billion, and the total value of the Prince Gong Mansion is difficult to estimate.

Zhang Jianghe made a lock and locked the gate of the courtyard, then returned to the poultry yard.

One courtyard house is enough. If you buy too many, you will likely be criticized.

Take some time to plant some grains, vegetables and fruit trees in the open space of the courtyard, using the excuse of scientific research. Who would dare to touch it?

Wang Xinghua found out about the courtyard house not long after it was purchased.

"Director Wang, I bought that courtyard house to study plant technology."

"Jiang He, weren't you researching mechanical technology? Why are you researching plant technology again?"

"For scientific research to be successful, you first need inspiration. When you have no inspiration for mechanical research, growing vegetables, grains and fruits can help you relax and study plant technology."

"That's true. The book you wrote, Thirty Years of Rush, was praised by the leader again."

"A lot of the content in Crazy Thirty Years was just my imagination. I never thought it would be so popular."

"If you can use the techniques of random imagination, wouldn't it be more powerful if you don't use random imagination?"

"The five-axis CNC lathe, medical manuals, and kitchenware are all developed by me."

“Can the technologies in Marvel and DC comics be developed?”

"The equipment in the comics are all my imaginations. It is not clear whether it can be made into a finished product. Science and technology should be developed step by step."