Rebirth 99 to become a car giant.

Chapter 29 "Forsighted" Spring City Stamping

Inside the Spring City stamping mold workshop, there was a lively scene.

The first thing Liu Darui, the director of the technical department, does when he goes to work every day is to come to the workshop to confirm the processing progress.

Normally, a medium to large stamping die takes about three months to complete.

Processes such as milling shaped surfaces and improving precision with grinders are time-consuming and there are no shortcuts.

However, in order to improve the progress, Liu Darui directly arranged for three teams of people to work day and night, and properly realized the disguised "007".

In this way, in more than half a month, the outline of the mold has come out.

"Mr. Dong, according to this progress, we can assemble and test stamping next week."

"At that time, the Jetta door hinge reinforced nut plate can be switched to our factory for production, and other nut plate molds will be completed one after another to achieve our Spring City speed."

Liu Darui was in high spirits at this time.

Previously, TDM molds were used to make nut plates, which not only often cracked, but also cost a lot, which made him very embarrassed.

Now I have unexpectedly acquired PRG's mold technology. As long as I digest it and absorb it, it can not only solve the production problem of nut plates, but also expand it horizontally to other stamping parts.

By then, which stamping parts factory in Spring City will be their opponent?

More importantly, they are a subsidiary of Spring City Automobile Group.

In terms of cost, the processing fee of the PRG process is only a fraction of that of TDM.

At that time, Spring City Volkswagen and Spring City Automobile Group will be able to take orders for various stamping parts as much as they want.

"Stop the mold processing of auto parts, complete the nut plate molds first, and try to replace all the nut plates of Nanshan Auto Parts Factory next month."

After Dong Chun came back from Yangcheng, he felt very resentful towards Nanshan Auto Parts Factory.

If I don't teach them a lesson, I won't be able to calm down the anger in my heart.

Of course, the most important thing is to use the PRG process to make the nut plate, which is a good thing for Dong Chun.

Not only can he avenge the Nanshan Auto Parts Factory, but he can also gain political achievements.

He has already reported to the Spring City Automobile Group, and is planning to make a report on the new technology achievements of the Spring City Stamping Plant next month, so that the brother companies and group leaders in the group can see the extraordinary performance of Spring City Stamping.

Maybe he can be transferred back to the group and promoted step by step.

"If all other molds are stopped, will it possibly affect the trial production and processing schedule of other car model parts?"

Liu Darui reminded him a little cautiously.

"How long will it be affected? The trial delivery schedule of those models already has margin, no less than ten or eight days."

"You remember, producing all the nut plate molds used on all models of Spring City Volkswagen and Modou Volkswagen is the most important job in the factory in the near future, bar none!"

When Dong Chun said this, Liu Darui naturally did not dare to object anymore.

However, he was secretly complaining in his heart.

Among the information I received, there were only some design data and mold structure diagrams of the nut plate.

This means that some content needs to be digested and absorbed before they are designed.

Originally, he wanted to produce one set of molds first, and then slowly produce others.

Now Dong Chun wants him to free up all the production capacity of the mold workshop to provide nut plate moulds.

His pressure suddenly increased.

"Mr. Dong, the technical department will go all out and resolutely complete the task."

Going against the leader will never end well.

Liu Darui's ability to sneak into the position of head of the technical department was not purely based on his superb skills.

Soon, the people in the Spring City Stamping Technology Department started working overtime every day.

Six sets of PRG molds were started at the same time, and more than 100 million yuan was invested in one go.

This does not include your own internal processing fees.

With this effort, the first set of Jetta model door hinge reinforcement nut plates was finally assembled.

Originally, Liu Darui wanted to debug it in a low-key manner to see if there was anything that needed improvement.

After all, for stamping molds, continuous debugging after assembly is a very important task in itself.

However, in order to show his importance and make the next "PRG Mold Technology Achievements Exhibition" a decent one, Dong Chun had to arrange a ceremony to celebrate the completion of the assembly of the first set of PRG molds designed and produced by Spring City Stamping and the start of test runs.

As the only stamping factory under the Spring City Automobile Group, the Spring City Stamping Factory has more than 1000 employees.

Although not everyone attended the ceremony, it was still very grand.

Dong Chun even invited local leaders and reporters from Spring City TV Station and some newspapers to attend the meeting.

At this ceremony, Dong Chun personally took the stage and spoke passionately for an hour.

While thanking local leaders and the group for their support, and affirming the efforts of employees, Dong Chun constantly emphasized how he grasped the development direction of the industry, formed a PRG mold research team, and personally led everyone to make progress day and night.

In short, Chuncheng Stamping is able to produce PRG molds, which is the result of his efforts.

As for how Chuncheng Stamping, which had never produced PRG molds at all or even studied PRG molds more than a month ago, achieved a technological breakthrough so quickly, Dong Chun deliberately downplayed this issue.

Anyway, except for those in the company's technical department, no one else knows the specific situation at all.

I said I formed a PRG mold research team, is that wrong?

No!

During this time, the technical department did have such a group.

Is it wrong to say that I grasp the development direction of the industry?

No!

The PRG process is definitely one of the future development directions of the stamping industry.

In the production of small and medium-sized parts, PRG mold has unparalleled cost and efficiency advantages.

At present, almost all domestic stamping factories are still using the TDM process. I led the Spring City Stamping Factory to start breaking through the PRG process. Isn't this far-sighted?

Liu Darui felt a little worried as he listened to Dong Chun on the stage praising the PRG mold next to him.

The mold can definitely be used, he is confident in this.

But is it possible to produce qualified parts...

There was no mold trial and no small batch production verification, so he was not sure!

Unfortunately, nothing can be said now.

Soon, Dong Chun and several other leaders symbolically pressed the start button of the stamping machine.

The PRG mold produced by Spring City Stamping Factory skipped the mold trial and directly entered the small batch trial production stage.

Bang!

Bang!

Bang!

The crisp sounds, like beautiful music, made Dong Chun smile a little more.

Taking advantage of this opportunity, he introduced it to the leaders of Spring City Automobile Group in a eloquent manner.

However, when the first part was produced, Dong Chun's expression changed as soon as he picked it up.