Rebirth 99 to become a car giant.

Chapter 18 No college students like it?

Although Cao Yang has a complete set of nut plates and bolt and nut technologies in his mind, it is obviously impossible for him to personally be responsible for the design process, molds, etc. of such parts for every customer in the future.

Therefore, it is very important to train Nanshan Auto Parts Factory’s own technical personnel and R&D personnel.

In this era, it is very difficult to find an undergraduate in a small private factory.

This obviously cannot meet Cao Yang's plan.

Thinking of yesterday when he was walking with his mother after dinner, she asked him if he had considered going back to school to continue his studies. Cao Yang thought that he could consider recruiting a few college students.

Shares or something like that is naturally impossible.

No one can come.

But the salary can still be relatively competitive.

After all, Nanshan Auto Parts Factory's profit margin is relatively high, so it is no problem to support a few college students.

He immediately asked someone from the Human Resources and General Affairs Department to contact him and caught up with a recent job fair held by his alma mater.

These days, campus job fairs are not as exaggerated as in later generations. In September and October, a lot of companies started to give various promotions, and by November and December, they basically started to come to an end.

For graduates of this era, most of the time they start looking for jobs in December, or even in the second half of their senior year.

Therefore, Nanshan Auto Parts Factory is not considered backward.

However, when Cao Yang and Zeng Tingting sat in front of their recruitment desks and saw the crowds of other companies at the venue collecting resumes, their moods became a bit complicated.

Especially the booth of Procter & Gamble in Yangcheng, which is more than ten meters away, the scene...

"Factory Director, today's college students like to work for foreign companies. I just took a look at Procter & Gamble. They advertise that the annual salary in the first year can reach [-]. Who can compare with it?"

Zeng Tingting walked around the venue a little disappointed, complaining to Cao Yang.

"Those college students passed by our booth. Many of them didn't even want to take a second look and left. There must be no one willing to come over."

"Director, your classmates must be seniors too, right? Why don't you contact them directly and see if anyone is willing to come to our factory?"

Zeng Tingting felt that if she wanted to recruit college students at Lingnan University of Technology, relying on normal methods would definitely not work.

College students have high standards. As Lingnan University of Technology is one of the best schools in Yangcheng, and even in the entire South China region, there is no need to worry about finding a job.

Although it has already experienced its first enrollment expansion, the number of college students has just reached 100 million. Compared with the situation with a zero at the end, employment is not a problem at all.

"After I left school, I didn't have any contact with you. According to my understanding, more than one-third of those classmates went abroad, one-third went to graduate school, and the few remaining in the class who were looking for jobs were probably all It’s settled.”

"Even if they don't have a settlement, they probably won't come to our factory."

Cao Yang still knew a little about his classmates.

I suddenly dropped out of school and basically lost contact.

After all, this is not an era when everyone has a mobile phone.

The most important thing is that when Cao Yang was in school, except for a few people in the same dormitory, the relationship with other classmates was relatively normal.

The reason may be that he just immerses himself in studying, or it may be that he is too handsome and always attracts the attention of a few girls, so his popularity with men is naturally not good.

"No wonder no one has come up to say hello to you in this job fair so far. It seems that basically none of your classmates have come."

Zeng Tingting's judgment is obviously relatively accurate.

Although the job fair is held at Lingnan University of Technology, most of the people who come are from other nearby universities.

Real graduates of Lingnan University of Technology rarely need to go through this type of job fair to find a job.

"Are you recruiting people majoring in material forming and control engineering?"

While Zeng Tingting and Cao Yang were talking, a thin student with a pair of thick glasses walked over.

"Hiring! Of course we are hiring. Our factory has its own mold center and we need talents in this field."

This was the first time a student took the initiative to ask, and Cao Yang started talking to him actively, regardless of his level.

There is no way, today's college students are so rich that they don't need to take off their gowns or put down their airs to find a good job.

How does it look like more than 20 years later...

"Director Cao, I haven't passed CET-[-], does it matter?"

After chatting for a while, the two parties finally got to know each other a little bit.

And this student named He Qingquan is obviously very interested in Nanshan Auto Parts Factory.

"It doesn't matter, we don't have any strict requirement for English."

"I also failed college English. I may not be able to get a degree certificate. Does it matter?" He Qingquan said again, "But don't worry, my professional English is still good. I can understand the basic English technical requirements. .”

"It doesn't matter. If you have any worries, you can tell me."

Cao Yang gradually became clearer. It seemed that He Qingquan had hit a wall elsewhere, so he came to his side.

Sure enough, normal college students still look down upon Nanshan Auto Parts Factory.

"I am only interested in mold design and related knowledge, and have no interest in other things. So I failed in several subjects such as Ma Zhe, physical education, ideological and political education..."

When He Qingquan said this, his voice became obviously softer.

Obviously, this is a student who is obviously partial to subjects.

"What do you think of PRG molds?"

Cao Yang is ready to get to know the other party well. If he has potential, it is not impossible to recruit him and focus on training him.

He Qingquan, who was originally unkempt and looked a bit slovenly, immediately changed his eyes after hearing Cao Yang's question, and his whole person seemed to take on a new lease of life.

"Director Cao, the PRG stamping mold is a high-precision mold used for metal stamping processing. It has high precision and high durability, and can produce metal products of various shapes and sizes. It has a wide range of applications, including automobiles. , electronics, aviation, medical and other fields, of course, there are mainly applications in this field abroad, and there are very few domestic applications."

"PRG stamping molds have the following advantages. The first is high precision. The processing accuracy of PRG stamping molds is very high. It can produce metal products with relatively precise shapes and sizes, which greatly improves product quality and work efficiency."

"The second is good durability. Because PRG stamping molds are made of high-quality materials, they have high durability and bending resistance. They can withstand complex processing with very good stability. At the same time, they can also increase service life and reduce maintenance costs. "

"Third, it is easy to maintain and replace. The design and manufacturing of PRG stamping dies are convenient and easy, and can be quickly maintained and replaced. They can adapt to product upgrades or market changes more quickly, and at the same time, they can also greatly improve economic benefits. "

"The fourth is high production efficiency: PRG stamping molds have high manufacturing precision and efficiency, are suitable for mass production, can speed up production and reduce production costs."

"Although the cost of PRG molds is relatively high and the design difficulty is relatively high. It is far less widely used than TDM molds in China, but I think that in the next ten or 20 years, PRG molds will definitely be used on a large scale in various industries. industrial sector.”

Although what He Qingquan said seemed a bit general to Cao Yang, it was already very good for a senior student to be able to do this.

After all, there is still very little understanding of PRG molds in China.

"Let's see, classmate He Qingquan, you probably don't know much about our Nanshan Auto Parts Factory. Why don't you come with us for a visit later? Then you can come to the factory for an internship in the next month. If both parties think it's suitable, Then we will sign a "Tripartite Employment Agreement", what do you think?"

Cao Yang's proposal was exactly what He Qingquan wanted.

Next, the two of them simply left the job fair, leaving Zeng Tingting stunned beside them.