Future super intelligent system

Chapter 276

The high-speed rail milling cutter is used to maintain the high-speed rail, because the train will wear during operation, not only the geometric shape of the rail head will change, but also defects such as wave wear, fish scale damage and fat edge will appear on the rail surface, so the rail It must be maintained in a timely and scientific manner.

If the rails are not maintained in time, it will directly affect the stability and comfort of the high-speed rail when running, and affect the life of the rails. More importantly, there will be safety hazards, and as the speed of the high-speed rail increases, the loss of the rails will increase. The bigger it gets, the more safety hazards there are.

Therefore, as China has such a high high-speed rail coverage, rail maintenance is a step that is rarely known but is actually the most important step. However, it is a pity that China, the core equipment of high-speed rail maintenance, can only rely on imports, and China The research and development of milling cutters is very backward.

Although the milling cutter is not as complicated as the chip looks, the research and development of the milling cutter itself is also naturally difficult, because the milling cutter is a superhard alloy material. Huaxia has actually disassembled the imported milling cutter many times. The materials inside are well understood, but I just don't know how to make such a milling cutter from these materials.

Let me give you an example. There is a kind of traditional Chinese medicine that can treat a certain disease. Now I will tell you which medicines I use, but I will not tell you the proportion of the medicine, the cooking time and the way of cooking, or whether there is a medicine primer. , study it slowly by yourself.How long does this have to be studied?
It is no exaggeration to say that there are countless possibilities here.Therefore, China's research and development methods are two ways, one way is to develop from scratch completely, and the other way is to carry out continuous matching and building experiments based on the materials of imported milling cutters, but no matter which way you go, you will fail again and again. Try again and again, burn money again and again, but no one knows when it will be built and how much money will be burned. This is a bottomless pit.

"If I remember correctly, our milling cutters are mainly imported from Austria, right?" Liu Fan asked recalling.

"Yes." Xu Jing nodded, "I just went to find out about the situation. Originally, there are substitutes in Germany, but they don't seem to be very willing to give us goodwill."

"Austria has always been friendly to China. This time, the company should have been threatened by some people. As for Germany, I heard that they have always wanted to kill us." Liu Fan said indifferently. Handing the phone back to Xu Jing, she turned to look at He Lin, "Let Mr. Guan come to see me."

Xu Jing got the news relatively quickly. After a while, the news that the high-speed rail milling cutter was about to be restricted spread on the Internet.Since Huaxia became powerful, various restrictions have not been broken, and now, coupled with the tension caused by Wood Dragon Technology, it is easy to attract widespread attention from netizens when news of restrictions appears.

But this time everyone’s reaction was a bit slow, because when it comes to technology being choked, what everyone can think of is either the chip or the system, and it has always been the chip and the system that make everyone feel that they are really passive. , so when it comes to chips and systems, everyone is familiar with it.

But relatively unpopular things like milling cutters, everyone doesn't know what they are, let alone how much technical content this thing has, and what consequences will be caused by being restricted.

Even searching for railway rail milling cutters on the Internet didn’t have much content, and all the information came out were relatively low-end milling cutters from other industries. However, when people in the industry gave everyone a popular science on the Internet, netizens showed a very unified reaction , I bought a watch last year!
What is the high-speed rail? The high-speed rail is China's face. Whether it is a chip or a system, it is really awesome. In the past, others used chips and systems to mess with us. Come.

This time, the impact of the milling cutter may not be as serious as that of the original chip system, because some experts said that the big deal is that we use a more backward method for maintenance, that is, the efficiency will be much lower, the cost will be several times higher, and the speed may be forced to slow down. But at least there is a way out.

However, using the high-speed rail to open the knife is a fucking slap in the face!
You can fight, you can break your arms and legs, but you can't hit your face!This is the rules of the world, this is the bottom line!

Those foreigners don't understand a truth, in China, face is more important than life!
So at this moment, the anger of Huaxia netizens was completely ignited.There was a lot of swear words flying all over the Internet, and it was obvious that everyone had lost their minds.

But sometimes think about it, people slap you in the face, what's wrong with being irrational, blood is impulsive, and people should have some blood.

In addition to anger and condemnation, another voice on the Internet is naturally seeking solutions.

"Where's Huaxia's milling cutter manufacturer? Why hasn't it made any progress after so many years? Just came out! The Rabbit family can't be bullied!"

"What should I do if the milling cutter is really gone? There is no other way but to grind it with an outdated abrasive belt? The Huaxia high-speed rail can't fall down!"

"Are there any countermeasures? Teach Austria and Germany how to behave, this matter can't just end like this!"

"How much does it cost to make a milling cutter? I'm personally willing to donate a year's wages, and every penny counts as a penny. They must not let them succeed!"

"We can even produce chips and systems. We can't stumble on the milling cutter. Come on, Huaxia Enterprises. I believe in miracles. I wait for miracles. Miracles will definitely happen, and they must be red!"

Of course, at this time, Aitemulong Technology must be indispensable.

Many comments popped up on Wood Dragon Technology Weibo.

"Liu Yutian, here for business, come out to pick up customers!"

"Are milling cutters within the business scope of Mulong Technology?"

"Liu Yutian, Rabbit was hit in the face, what should I do?"

And some good honest people.

"I hope everyone will not kidnap Liu Fan morally. Wood Dragon Technology cannot be omnipotent. No matter how you look at it, this milling cutter has something to do with Wood Dragon Technology. Wood Dragon Technology can't control this matter. Please don't bother Liu Fan anymore. "

The reason why people who make such comments are called honest people is because few people actually came to morally kidnap Liu Fan. Everyone just habitually thought of Wood Dragon Technology at this time, but Wood Dragon Technology can’t do it. Well, it’s impossible for everyone to really blame Mulong Technology. That would be a mental retardation.

When there were more and more comments, the netizens suddenly froze for a moment. Under the honest man's message, they seemed to have seen the reply from Wood Dragon Technology's deity.

I saw Mulong Technology replied under the honest man, "Who do you look down on?"

When everyone was dumbfounded by Wood Dragon Technology's reply and even suspected high imitation, Wood Dragon Technology started the crazy reply mode and replied one by one under everyone's message.

"Liu Yutian, here for business, come out to pick up customers!"

"Here comes brother!"

"Are milling cutters within the business scope of Mulong Technology?"

"You can learn more about Wood Dragon Technology's smart+ plan~~"

"Liu Yutian, Rabbit was hit in the face, what should I do?"

"Call back!!!"

With more and more replies from Wood Dragon Technology, everyone immediately understood that Liu Fan's sentence of looking down on someone turned out to be a joke.

Today's wood dragon technology, a batch of leather.

But everyone understands this kind of confidence in his skin.

Wood Dragon Technology seems to be in control of this matter!

(End of this chapter)