Opening Awakening Weapon Box

Chapter 132
Although Qinghan dismantled the mech, the pilot inside was fine.

When he crawled out from the ruins, he only saw Deputy Minister Man with a gloomy face.

"Deputy Minister?"

"Go back and practice!"

"Yes!"

The driver ran very fast. He could see that the vice president was in a bad mood, and he also understood how expensive the mecha he was driving was.

To be honest, he was the most confused when the mecha was cut open.

No mecha pilot would think that their mecha is not strong, otherwise they would not sit in the cockpit with peace of mind.

However, it was such a strong mecha, but it was cut open by a girl with a sword.

The driver finally took a look at the parts all over the floor, and shuddered deeply, if it was him who went up to fight.
He was very unwilling to conceive of the ending, so he ran very fast.

the other side.

Since the mecha combat department left, Qing Han and the young master walked together, the two of them had nothing to do, and did not choose to enter any department.

"To see that person?"

Qing Han suggested.

"that person?"

"The one who has been following you."

"Little Yuzi."

"Correct."

"Don't go."

".?"

"I don't know where it is, I don't want to ask, so I don't go."

Qinghan was silent for a moment, and then she also chose not to go.

Asking for directions is really too troublesome, so, Xiao Yuzi, you should fend for yourself.

Because the time they stayed in the combat department was not too short, they could already see other candidates at this time.

The reason why it can be judged that it is an examinee, not a student of Shrek, is because the students of Shrek are all wearing the uniform uniform of the college - shit green, not very good-looking clothes.

Moreover, most of the candidates were staggering, and it seemed that they drank a lot in the third level.

In such a situation, it is difficult to be sure that they can show their true level in the fourth level.

"Boom boom boom——"

The ground trembled, and the two looked back.

It wasn't that the mecha ran out, but behind the two of them, there was a child about two meters tall.

His steps were steady, and he didn't show any signs of being drunk. From this point of view, this guy's third pass must have been good.

But the young master and Qing Han didn't pay attention to this.

"Is this 12 years old?"

"...Should be, Shrek recruits only 12-year-olds, children above or below 12 years old will not be admitted to Shrek Academy."

"...he's developed really well."

The young master finally took a look at the strong physique, and concluded.

"By the way, where is the forging department?"

The young master wanted to see the forging department that Deputy Minister Manji was talking about. Although his memory had not recovered, he was interested in forging.

Qing Han didn't answer, and silently moved away.

But before he had gone far, he was grabbed by the young master.

"Don't try to run."

The young master's face magnified in front of Qing Han's eyes, but the other party's expression was a bit gloomy.

When leaving, Deputy Minister Manji told them the location of the Forging Department and the Kendo Department, but only Qinghan listened. When the Deputy Minister was talking, the young master had already left first, but for some reason, he knew Qinghan knows the location.

In the end, Qinghan gave in, and she led the way. The two turned around and finally came to the forging department.

Unlike the mecha combat department, which looks as if it has just been built, it can be seen at a glance that the forging department has settled in this place for a long time.

Chances are this is the general point of the forge.

The tall building is like the ones seen in Shrek City, but it is not so tall, and it doesn't look obtrusive in Shrek Academy, but that kind of lofty ambition can't be overshadowed.

The portal is a bit special. A big hammer is placed there, as if waiting for someone to come and pull it out.

Not far in front of the forging department, there is a sign that reads: Forging department
But it says on the portal: Blacksmith Association - Shrek Branch

OK, here is the general point of the forging department.

The two walked in together, at first Qinghan wanted to run away again, but was pulled back by the young master's ruthless iron hand.

The reason is: I tested with you just now, now you accompany me.

Qinghan wanted to refuse, but in terms of brute force, she was no match for the young master as a weak woman, so she was finally pulled in.

Entering the gate, the spacious hall makes people feel relaxed and happy. When they saw the two coming in, a tall woman in professional attire with a good figure, who was many times better than Qinghan's tablet, came to welcome her.

"Hi two, are you going to take a test?"

The young master nodded, and Qing Han, just like the young master in the mecha combat department, didn't say a word, just followed behind silently.

However, there was some resentment in her eyes.

"?"

The young master looked back, thinking that he felt wrong.

But the facts proved that it was true, but the resentment was not directed at him, but at the receptionist
——Xia Fangfang.

The other party did not specify his name, but the basic information was written on the work card hanging on his chest.

Xia Fangfang

Blacksmith Association Front Desk
Under Xia Fangfang's leadership, the three circled around the lobby before entering the elevator.

"Hello, both of you. I am the front desk of the Blacksmith Association. My name is Xia Fangfang. I am sorry that due to the internal design of the association, we have to walk such a long way to get on the elevator."

"I also complained about the inhumanity of the association's design, but it wasn't until the front desk was surrounded by a sea of ​​people that I realized that this design had a deep meaning. The elevator was not placed at the door to prevent confusion in the flow of people. Make it impossible for visitors to go directly to the floor they want to go to."

As the receptionist, Xia Fangfang was quite good at speaking.

if
Forget it, don't mention him, I hope he works hard!
Under Miss Xia's introduction, the two had a certain understanding of the Blacksmith Association-Shrek Branch.

There are four floors in total, three above ground and one underground.

What they are taking now is a passenger elevator, which can only move between the three floors on the ground.

The first floor is the lobby, which is responsible for hospitality and has guided guests to the floors they need.

The second floor is the sales hall, responsible for selling forged products.Most customers will go there and buy what they need directly.

And the third floor is the blacksmith floor.This place is generally used to receive customized services, and also provides available forging tables to meet the needs of customers forging themselves.

Of course, under normal circumstances, no one would use a guest forging table. After all, not everyone is a blacksmith. Most of the items you need can be bought on the second floor, and customized items can also be found on the third floor. Spend a little money to find someone to forge directly, and the speed is not slow. In this case, there is naturally no need to forge it yourself.

"Few people come to the third level of the Blacksmith Association at Shrek Academy, because those who can become blacksmiths in the academy will provide them with a forging platform, and they can directly buy any materials they need. So over time, the third floor It is mostly used to test new students and test grades for old students."

Xia Fangfang said, through her mouth, the young master also knows that blacksmith is a very important profession nowadays.

Not only the materials of mechs need blacksmiths, but other materials, such as kitchen utensils, weapons, and scientific research equipment, all need blacksmiths to create, which makes blacksmiths the most popular profession nowadays.Their number is more than soul masters.

Most martial artists would choose to become a blacksmith.

After all, there is no high threshold for a martial artist. As long as you put in the effort, you can become a martial artist. Although the achievement may not be too high, your strength will definitely increase a lot.

After some simple study and training, one can become an apprentice-level blacksmith.

Yes, blacksmiths also have ranks.

From high to low, they are saint craftsman, god craftsman, master craftsman, teacher level and apprentice level.

Although the young master thought this level division was strange, he finally accepted it.

Apprentice-level blacksmiths can forge items that can meet most daily needs and earn a lot of money.

The teacher level can accept some scientific research needs, and this level, as the name suggests, can teach apprentices, and can also charge a lot of apprenticeship fees
"For new students, the general assessment will only be an apprentice test, but the materials given are those that can be forged into teacher-level materials. Of course, no matter whether the assessment succeeds or fails, there is no charge, but the final product must be handed over to the Blacksmith Association Yes, if you want to keep it yourself, you need to pay for the materials."

The three of them went straight to the third floor, where there were individual rooms, and each room had a sign with the blacksmith's name on it.

After Xia Fangfang swiped her card, she opened a room that said: public.

"You two wait here, I'll call the teacher in charge of the assessment."

After Xia Fangfang finished speaking, she backed out directly.

The young master ignored her and checked the equipment in the room on his own.

A stove is a must.Of course, there is also a smoke removal device.

However, the stove is not the kind that uses charcoal fire, but is mechanized. You can set the temperature by yourself and directly reach the desired temperature.

Even if you don’t know where the melting point of the item is, there is a scanner next to the stove. After setting the smart mode, put the material on the scanner, and it will automatically set the melting point of the material, which is very user-friendly.

"So this smoking, what kind of cigarettes are you smoking?"

Qing Han was puzzled.

The young master ignored her, and then looked at the equipment.

The forging hammer is placed on the table. The table is also an intelligent table with various patterns on it. Just click on it to pop up the tool you need.

The reason why the forging hammer is placed directly on it is because the hammer is too big, and it needs to be used too many times in the forging work.

There is a shelf behind the forging table, on which are placed various materials, such as soul steel and pig iron, which are common materials and not expensive.

Most of the apprentice-level and teacher-level forgings also need these materials.

There is no monitoring in the room, after all, the work of the blacksmith is relatively secret.

But there is a sensing device on the shelf, which is used to judge how much material the internal personnel have taken. All of these need to be charged!

Meanwhile, there is a TV above the shelf.

There is no advertisement on the TV, but it says: The number of people waiting is 0, please use it patiently.

Below this line of words, there is another line of small words: The internal facilities are kindly provided by Xibo Technology Company.

"This Xibo company is quite charitable."

The young master muttered something, and then took the materials from the shelf on his own.

I didn't bother to get the temperature by myself, so I adjusted it to the smart mode, and threw it into the stove after scanning.

The material was liquefied quickly after being subjected to high temperature. During this process, thick smoke was emitted for some unknown reason, and the hood started working immediately.

"No fire and smoke??"

Qinghan was very surprised to notice that his voice was very loud.

The young master glanced back at her, then turned back again.

To shut up
Qing Han read these two words from his expressionless but eerie face.

Immediately, she really shut up, and watched the boy's performance with peace of mind.

The young master clicked on the functional table, took out a shelf, and took out some of the melted metal.

The part of the pop-up work of the function table is not connected with the forging part.

The forged part is made of high temperature resistant materials, and will not melt due to high temperature during the forging process, which will affect the forged product.

The young master picked up the forging hammer at the side, held the frame in his left hand to fix the metal, covered the hammer bigger than his head with his right hand, and struck the red metal one after another.

"Boom boom boom——"

The dull and rapid sound of blacksmithing constantly echoed in the room.

Qinghan moved his steps and walked to the side to watch the young master's movements.

It seems that his strength is not great, but the metal is constantly deformed under his knocking, gradually becoming flat from the original box shape.

The frame in his hand was loosened and tightened, and obviously he didn't make any unnecessary movements, but the piece of metal changed his posture obediently.

The hammer went up and down again, and after a while the whole metal became flat and long.

The young master paused for a moment, and tapped a pattern of water on the functional table, and then the place other than the tool part and the forging part was sunken, and a puddle appeared at that place.

No wonder the table is solid!
Qing Han thought so.

I saw the young master holding it with a shelf, and threw the metal directly into the puddle.

"呲-"

The violent sound was accompanied by a large amount of water vapor, and the smoke machine automatically started working again.

It’s true that it’s impossible without this thing, the entire forging room is closed, if there is no smoke machine, I am afraid that just this one, the forging room will have to become a fairyland!

After there was almost no sound in the puddle, the young master took the metal out.

The metal that was originally glowing red is now shiny, which is the luster of the broken silver itself.

The young master took out the tool from the tool table again, this time Qinghan didn't recognize it, but from the function point of view, it should be similar to a file?

Soon, the handle of the knife was forged.

Then take out a new tool and sharpen the blade.

In this way, the shape of a knife appeared in front of Qinghan's eyes.

The young master nodded in satisfaction, and then took a piece of material from the shelf behind him to use as a handle.

"good."

After so long, the young master finally said something.

But then he threw the knife into the stove again.

Just like the high temperature just now, the metal was quickly burned red.

This time, the young master did not use a clip, but took it out with his own hands.

Because of the stove, Qing Han didn't notice the faint golden light on his hand.

Instead of putting his hand on the handle, he grabbed the blade directly.

Bow left and right, and pull hard.

"Tear it apart?!"

(End of this chapter)