When NC apprentices have a task system

Chapter 96 What... 0 Tolerance!

It is said that Xu Yang was planning to open the protective door to check the effect of the deep cavity boring of the sample workpiece, but there were several uneasy voices behind him.

Among them, Xu Yang knew that it belonged to Fang Yanshuang, so what about the other two?
Thinking of this, Xu Yang slowly turned around to look, was stunned, and subconsciously blurted out:
"Chen Gong, Yi Gong?"

Xu Yang never expected that the two in front of him were CNC master Chen Zhengxin and EDM master Yi Tianya.

However, Xu Yang didn't know that Chen Zhengxin and Yi Tianya were even more shocked. It could be said to be a shocking feeling.

Who would have thought that a suspected foreign aid CNC master would be the new CNC apprentice Xiao Xu, the contrast is really unacceptable.

But at this moment, everyone present was focused on the workbench of the CNC machining center, or to be precise, the sample workpiece.

"Xiao Xu, is there a workpiece with a deep cavity boring inside?"

Chen Zhengxin asked eagerly.

"is it?"

Yi Tianya at the side agreed.

Seeing the eagerness of the two, Xu Yang couldn't help but feel his heart tighten.

Originally, Fang Yanshuang was the only one who knew about it, so the pressure was less, but now there are two more colleagues at the master level, which means that the pressure has doubled!
Although Xu Yang has full confidence in the system, there are accidents in everything. If the precision requirements and tolerances of the deep cavity boring are not up to standard, it will be a large-scale social death scene.

But the matter has come to this point, Xu Yang had no choice but to act, so he could only bite the bullet and answer:
"Well, in the afternoon, Ms. Fang and I went to Hengde to get back the sample workpiece, but the other party's precision requirements and tolerances have changed, requiring within +0.02mm, and there are not only us participating in the competition order, but also Feilong Mold Factory."

"Xiao Xu, you are telling the truth!" Fang Yanshuang echoed.

"This……?"

Chen and Yi frowned when they heard this.

"Deep cavity boring accuracy requires a tolerance of +0.02mm? And Feilong Mold Factory?"

Although these two amounts of confidence are small, their impact is no less terrifying than a machine hitting a knife.

Only then did Chen and Yi realize that they had wrongly blamed Fang Yanshuang. They thought that this batch of orders was something that others didn't want, but now it seems that things are far from being as simple as they thought.

They never expected that such a disgusting order would have to be obtained through competition. It is conceivable how fierce the competition pressure is in today's mold market.

The key is that this Feilong Mold Factory is not to be underestimated in its strength, and it is also the deadly rival of Donghai Mold Factory. The two have always been at odds and secretly compete.

Thinking of this, Chen Zhengxin said seriously:

"In this case, Xiao Xu, the first priority is to see the effect of processing!"

"Yes, Xiao Xu!"

"that is!"

After Chen Zhengxin finished speaking, Fang Yanshuang and Yi Tianya echoed.

"Okay!" Xu Yang said.

In fact, even if Chen Zhengxin didn't open his mouth, Xu Yang couldn't wait to see the effect of deep cavity boring.

In the next second, under the watchful eyes of everyone, Xu Yang carefully took out the sample workpiece.

"Hey, what a knife!"

Xu Yang looked at the four holes, the interior was smooth and delicate, and gleaming. It was the boring effect of the excellent quality of the tool.

Thinking of this, Xu Yang cast his eyes on the spindle, and saw that the super boring anti-vibration knife was still the same as before, and it seemed that there was no trace of wear and tear. It was indeed a top-quality tool produced by the system.

The appearance is perfect, but the size tolerance is still open to question.

Because it is a high standard of 0 tolerance and strict requirements, ordinary calipers are naturally unable to do this high-precision measurement work, so they can only use a three-dimensional optical measuring instrument.

Holding the sample workpiece, Xu Yang asked Fang Yanshuang:

"Miss Fang, do you have the key to the testing room?"

"Yes...I do!" Fang Yanshuang was stunned for a moment, then continued hurriedly.

"follow me!"

After finishing speaking, several people followed Fang Yanshuang into the testing room.

There is indeed a 3D optical measuring instrument in the inspection room of Donghai Mold Factory, but it seems that it is rarely used.

As for how Xu Yang found out, this is actually very simple. If a general mold factory goes in and out of the inspection room frequently, the room will definitely smell of cutting oil to some extent. There is no other peculiar smell, but a strong dusty smell.

Fang Yanshuang seemed to see Xu Yang's doubts, and immediately explained embarrassingly:

"Xiao Xu, this kind of high technology is rarely used in our factory, and we usually use calipers to measure."

"Makes sense!"

"This thing is useless at all!"

Chen Zhengxin and Chen Zhengxin agreed one after another.

"Understood!" Xu Yang smiled lightly.

In fact, Xu Yang also understands a truth, that is, Donghai Mold Factory, or most of the mold factories, even if they don’t usually use 3D optical measuring instruments, they will usually buy one and put it in the factory, even if it is for maintenance. Let it eat dust, and it doesn't hesitate.

There is often only one reason why they do this, and that is to increase the confidence of customers.

Just imagine, if a customer sees a small mold factory that even has a 3D optical measuring instrument, it doesn’t mean that the mold factory has the qualifications to process and produce high-precision molds and products. Naturally, he will be assured of working with this mold. The factory talked about cooperation.

Society is like this, and sometimes a proper display of strength can help enhance your persuasiveness.

But after turning on the 3D optical measuring instrument, Xu Yang found that he would not use this thing at all, so he could only bite the bullet and ask for help:
"Well, Miss Fang, I don't know how to use this."

"what!"

Fang Yanshuang was taken aback when she heard the words, then exclaimed, and continued.

"Me neither!"

"Don't look at me, I won't either." Yi Tianya shook his head and said.

When the three of them were embarrassed, Chen Zhengxin stepped forward and patted Xu Yang on the shoulder, and said with a slight smile:

"I'll come!"

The two of Xu Yang were overjoyed when they heard the words, and they breathed a sigh of relief. Fortunately, someone would.

It turned out that as the only CNC machining center master in the factory, Chen Zhengxin had the honor to observe the manufacturer's simple use tutorial, and the boss Fang Dahai specially asked the manufacturer to guide Chen Zhengxin several times just in case, and then sold a copy of the tutorial. , that is, at that time, Chen Zhengxin learned to use a 3D optical measuring instrument.

Who would have thought that Chen Zhengxin would use a 3D optical measuring instrument to measure workpieces again in Donghai Mold Factory during his lifetime.

Chen Zhengxin is indeed the only person in the factory who can use 3D optical measuring instruments, and his skillful operation techniques are amazing.

Just when Xu Yang was deeply moved, the system's voice sounded.

“叮！触发NPC数控师傅陈正新的任务：观摩数控师傅陈正新的3D光学测量仪的操作规程，要求专心一致。任务完成奖励：金钱＋100！经验＋100！系统故障修复＋0.1%！有一定的几率获得3D光学测量仪的操作心得一份。”

"Isn't it?"

This can also be learned?

Xu Yang was stunned and thought to himself.

Since the system task required, Xu Yang immediately focused on observing and learning.

Following Chen Zhengxin's dazzled operations, the measurement results came out soon.

It's just that when everyone saw the measurement results, they froze in place.

At this moment, on the screen of the 3D optical measuring instrument, the dimensions of the four holes of the workpiece are displayed as:
125mm, this size is exactly the same as the size requested by the customer, which means... 0 tolerance.

　Rejuvenating the country through industry, CNC technology!
　　
　
(End of this chapter)