When NC apprentices have a task system

Chapter 89 The Eightfold Realm of NC People!

Yi Tianya glanced at Xu Yang's operation process. He never thought that this new CNC apprentice would have such a solid foundation in EDM.

From fixing the workpiece, punching the watch, and dividing it all in one go, he is more proficient than veterans, and the setting of processing parameters is also just right. The whole process gives people a smooth flow.

As a master in EDM, Yi Tianya knows that EDM is often accompanied by a series of derivative phenomena, such as through the external performance of the machining process, one can understand the stability of the machining, and also find the abnormal discharge state of the machining.

During normal processing, the observed sparks are usually blue-white with fiery red in color, and the sparks are small and uniform.Small smokeless bubbles appear on the surface of the processing fluid, and the sparks heard are clear and continuous.The current and voltmeters of the machine tool swing regularly, and the servo dial indicator feeds at a constant speed.During processing, each discharge time and tool lifting action continue regularly.

Xu Yang's electric cremation machining is a normal discharge state, which can ensure that the original precision of the workpiece will not be affected to the greatest extent.

Yi Tianya glanced at the depth detection value of the machine tool, and it basically showed a steady progression.

"Tsk tsk, amazing!" Yi Tianya sighed.

"Magnetic..."

With a crisp sound, the EDM machine finally stopped running, which meant that the processing was completed.

At the same time, Xu Yang just finished processing the last piece of workpiece and got out of the violent mode.

"It's so cool!"

Xu Yang looked at the workpiece in his hand and showed a long-lost smile.

At this moment, the sound of the system came as promised.

"Ding! The task of NPC EDM Master Yi Tianya is completed: money +100! (in storage) experience +100! (in storage) favorability +5! System fault repair +0.1%!"

yeah!
Mission accomplished.

Although the task is completed, Xu Yang can't leave the EDM machine, he has to wait for Yi Tianya to come back before he can leave.

correct.

How did this Yi Tianya go for so long?
Isn't he afraid of cramping his feet after squatting for a long time?
Speaking of this, Xu Yang suddenly felt that his feet seemed to be numb, and his legs were out of control. The next moment he squatted on the ground habitually, feeling uncomfortable like a numb scalp.

"foot……"

Xu Yang endured the pain of numbness in his scalp, and after a while, he recovered from the cramps and heaved a sigh of relief.

Who would have thought that when he turned around, he saw a figure standing behind him, staring at his ass with an idiotic expression, who else could it be if it wasn't Yi Tianya?

"This?"

Seeing Yi Tianya's weird smile, Xu Yang's heart tightened suddenly, a sense of crisis welled up in his heart.

"Wucao, is Yi Tianya an LSP? And he likes men?"

Thinking of this, Xu Yang quickly distanced himself from Yi Tianya by a piece of work, and only then did he feel a sense of security. At this moment, he is the pure him.

"Master Yi, since you're back, I'll go to Chen Gong's place."

Xu Yang didn't give Yi Tianya a chance to contact him at all, he found a reason casually, and then slipped away.

"Ha ha……"

Yi Tianya looked at Xu Yang's back and smiled thoughtfully.

Of course, Yi Tianya didn't know Xu Yang's inner thoughts, otherwise he would definitely go berserk.

"Xiao Xu, come here."

As soon as Xu Yang returned to the CNC machining center, Chen Zhengxin waved to him and motioned for him to come over.

"Chen Gong."

Xu Yang hurried forward and said.

Because of the change of the shaved cloak before, Chen Zhengxin changed his indifferent tone before, and said with a slight smile:

"Xiao Xu, I think you are a good seed, do you want to learn some real skills from me?"

"Study technology?"

Xu Yang was overjoyed when he heard this. He subconsciously nodded like a chicken pecking at rice and said, "Well, thank you, Mr. Chen."

Although Xu Yang has an inexplicable familiarity with machining, his technology is at a new level and he knows nothing about it.

Therefore, Xu Yang desperately hopes that someone can teach him to learn CNC technology, so that the system failure can be repaired as soon as possible, and the previous memory can be retrieved.

"Very good, now I will tell you about the eighth realm of CNC people, and you can also see which level you are in?"

Regarding Xu Yang's enthusiasm for knowledge, Chen Zhengxin smiled with satisfaction.

"The eighth realm of digital control people?"

Xu Yang was taken aback for a moment, and couldn't help frowning.

However, for a CNC apprentice, since he has the master's knowledge of popular science, all he has to do is to concentrate and listen carefully.

"Ding! Trigger the task of the NPC CNC master Chen Zhengxin: listen carefully to the popular science knowledge of the CNC master Chen Zhengxin, and be sure to treat it wholeheartedly. Task completion reward: money +100! Experience +100! System fault repair +0.1%! There is a certain chance of getting assistance The props are a super boring anti-vibration knife, warm reminder: the better the attitude of serious study, the higher the chance of obtaining auxiliary props."

what!
Another task.

There is still a chance to get a boring anti-vibration knife?

Xu Yang was both surprised and delighted.

He was happy that he had another task to do, but he was surprised that he didn't even know what a boring anti-shock knife was?
Although Xu Yang was full of doubts, but now is not the time to clear them up, because Chen Zhengxin has already started to popularize science, so Xu Yang can only put his doubts behind him, and then concentrate on listening carefully.

Next, Chen Zhengxin talked about it.

"The eight realms of CNC people are as follows..."

It turns out that the eightfold state of CNC personnel is a unified standard set by industry insiders to distinguish the level of technology, reputation and prestige of CNC personnel.

[-]. Semi-entry apprentices.

Know the relationship between machining coordinates and design coordinates.Familiar with two-dimensional tool path, contour, parallel processing, three-dimensional equidistant processing, can divide shallow and steep surfaces, understand the relationship between tolerance and allowance, and can manually program.Understand the structure of the mold, and can disassemble the copper male.

[-]. Entry-level apprenticeship.

It can basically complete the processing of soft materials, such as copper, and the size is basically accurate.Basically be able to process simple two-dimensional steel materials and be familiar with the process, and can control the error within one wire.

[-]. Junior apprentices.

No parting, the empty knife is relatively small.The rhythm of the tool path is chaotic, the tool path is cumbersome, the thinking is not very clear, and there is a lot of waste of repetition.

[-]. Intermediate technicians.

Basically, the mold cannot be separated independently, and it needs to rely on the mold engineer or the 2D drawing of the mold structure.I have a certain understanding of knife rebound, broken knife, overcut, corner problems, light not in place, etc., but there are still many empty knives.

Five, senior programming master.

It can be molded independently, there are not many programming problems, and the processing is basically in place, but the processing effect is average and not very beautiful.The remaining amount is uneven, the interface between the two tool paths is not smooth, and the polishing is difficult.

[-]. Senior programming engineer.

The operation is smooth and smooth, understand the mold assembly, know how the allowance of the processing surface matches the assembly of the mold, and other after-sales problems.

Seven, CNC half-step elite.

Actively change product design to meet the rationality of mold structure and processing.Can accurately calculate the processing time, and be able to quote the product for CNC processing.

Eight, numerical control elite.

Proficient in all machine tools and equipment, familiar with all mold structures, capable of independent mold parting, programming and processing, accurate calculation of processing time, high efficiency, and fast quotation.

After a while, Xu Yang finally absorbed the popular science knowledge of the eighth realm of CNC people.

　Rejuvenating the country through industry, CNC technology!
　　
　
(End of this chapter)