When NC apprentices have a task system

Chapter 33 Bad News

"what's the situation?"

Xu Yang was stunned and quickly followed the sound.

Zhong Xing was seen slumped on the ground with cold sweat dripping from his forehead and his face was pale.

When something happened suddenly, Xu Yang hurried over to check on Zhong Xing's health.

"Zhongxing, what happened?"

"The knife... the knife flew out!"

Zhong Xing stammered, but actually sneered in his heart:

"Humph!"

"Xu Yang, just wait and cry!"

"?"

Xu Yang looked at Zhong Xing, and suddenly had a bad premonition in his heart. He always felt that Zhong Xing was a little weird. What was it?He didn't know either.

"what happened?"

"What happened?"

"Looks like a new machine tool?"

"Go and see?"

……

Not only Xu Yang, but everyone in the workshop gathered in front of the three-axis CNC machining center in a daze, talking a lot.

"Zhong Xing, what's the matter?"

"Zhong Xing, are you alright?"

"Isn't it a knife hit?"

……

Xu Yang bypassed the crowd, saw a depression on the protective door, and glanced at the tool changing arm of the tool magazine hanging in the air. He seemed to know something?
Eighty percent of the time when changing the tool, the circuit suddenly short-circuited, and then the tool flew out and hit the protective door directly. Fortunately, Zhong Xing closed the protective door, otherwise the consequences would be disastrous.

But yesterday, the master who adjusted the machine checked several times, and finally left after confirming.

strange?
Xu Yang couldn't figure it out.

"Xiao Zhong, are you hurt?"

At this time, the supervisor Ling Xiaoming came over and asked for condolences.

"Scared me!"

"The knife flew out directly. If I hadn't closed the protective door, I would have ended up here today."

Zhong Xing said in shock.

"Did the knife fly out?" Xu Hui rushed to the workshop in a hurry. After understanding the whole story, he couldn't help but frown.

"By the way, where is Xiao Xu?"

He scanned around and didn't see Xu Yang.

At this moment, Xu Yang has already walked to the back of the machine tool. With the help of the scanning function of the machine adjustment auxiliary tool, he carefully checked all the PLC lines, and finally found that several of them were burnt.

"Ding! The CNC machining center tool magazine line is short-circuited,"

"It really is a short circuit in the tool magazine circuit?"

Xu Yang was a little puzzled. If it had been used for a long time, it would be acceptable if the wires were burnt and short-circuited after aging, but this is a new machine tool.

Really hard to understand?
"Huh, is this?"

Suddenly, Xu Yang discovered that there were some wire debris at the bottom of the electrical box. At this moment, he seemed to have found the culprit?

That's right!

It was because the wire was broken, which caused the temperature of the line to rise after Zhong Xing was turned on, causing a short circuit fault.

Could it be a mouse?

"Is it troublesome now?"

Xu Yang regretted why he didn't fight for his reasons. Now that the incident has happened, fortunately there were no casualties.

Why did Xu Yang find things troublesome?
Because he and Xu Hui were responsible for accompanying the adjustment of the machine yesterday, naturally some accountability was inevitable.

really.

"Xiaohui, what's going on?"

“Why do machine tools malfunction?”

"How did you do it, didn't you let you be responsible for accompanying the machine adjustment?"

"Fortunately, Zhong Xing is fine? Otherwise... How can you be responsible?"

Ling Xiaoming scolded Xu Hui, but the latter could only lower his head.

"Director Ling, I didn't do my job well, so I accept the punishment."

Xu Hui apologized sincerely.

"Humph!"

Ling Xiaoming snorted coldly, then turned around and called the manufacturer, asking them to send someone over to take a look.

Because it was Monday and because of the failure of the new machine, Xu Yang didn't do anything all morning.

During lunch break, Xu Hui told Xu Yang something, which made Xu Yang smell a conspiracy.

Xu Hui lit up a cigarette, took a deep breath and sighed:

"Xiao Xu, I have some bad news to tell you?"

Xu Yang was stunned and said calmly: "Xu Gong, what's the matter?"

"Because of today's sudden situation, part of the reason was caused by me. If I had been more careful, maybe the scene in the morning would not have happened."

"Xugong, you don't have to blame yourself, maybe the tuner was negligent?" Xu Yang comforted.

In fact, Xu Yang really wanted to say that the reason had nothing to do with Xu Hui, but was caused by rats.

"Hey!"

"In any case, I am responsible, so the factory held a meeting and decided that I would not be able to participate in this assessment, and that the assessment should be fully entrusted to Li Gong."

Xu Hui shook his head.

Li Zheng is in charge of the assessment?

Zhong Xing was surprised?
Xu Yang connected things together, and he felt more and more that things were not that simple?
Why do good mice gnaw on wires?
But last night, it was true that only Xu Hui and Xu Yang were the last to leave the workshop. As for everyone else, they were not present?
too weird?

"Don't worry, XCMG!"

"I can definitely pass the assessment."

Xu Yang smiled lightly.

"Ah."

Xu Hui smiled slightly.

If such a thing had happened before, perhaps Xu Hui would have directly let Xu Yang admit defeat, but the matter of Saigang made Xu Hui feel incredible about Xu Yang's talent. It seems that Xu Yang has been reborn, and he can do everything perfectly , turning bad luck into good luck.

In the afternoon, there was still nothing big to do, Xu Yang just shaved, drilled, and tapped, while Zhong Xing was taught by Li Zheng to program and process for him.

Regarding Li Zheng's selfish behavior, Xu Yang just looked at them coldly. Now he is no longer the good-for-nothing apprentice he was before.

Xu Yang counted his bugs.

Programming: He has a super UG programming simulator, and the terrifying ability of automatic programming beyond two levels makes him invincible at the stage of technicians.

Processing: clamping, prelude trilogy, he has handy, comparable to the humanoid induction system.

Processing Center: Xu Yang has reached the intermediate level and is not afraid of Zhongxing.

The only variable is Li Zheng?
Regarding Li Zheng, Xu Yang had no idea at all.

If Xu Hui is a disapproving character, then Li Zheng is a gloomy and introverted character, which makes people confused and deep in the city. Anyway, Xu Yang seems to be naturally not interested in Li Zheng.

"Xiao Xu, is your situation not good?"

When he got off work, Lao Liu pulled Xu Yang aside and said worriedly.

Xu Yang's heart warmed when he heard this.

There are so many people in the factory, almost everyone is optimistic about Zhong Xing, and naturally they will also look towards Zhong Xing, only Lao Liu, a carefree person, has always been okay with Xu Yang.

Thinking of this, Xu Yang decided that if he becomes prosperous in the future, he must pull Lao Liu a hand, after all, the blessings are shared.

Xu Yang said with a faint smile: "Old Liu, thank you for your concern. There must be a road before the car reaches the mountain. I believe that the truth will stand on the stand of justice."

"All right!"

"Your boy is the same as XCMG, with a good attitude!"

Old Liu frowned when he heard this, and joked.

After dinner, Xu Yang was going to play a mobile game, which was the LQL mobile game that Tianmeng Group had just tested publicly.

This game was born in 3009, the first year of Huaxia, and this year is 3021. It has been 12 years, and it can be described as a hot mess!
"Dudu..."

At this time, Deng Shan called.

"Hey, Mr. Deng, are you looking for me?"

"Xiao Xu, do you want to work overtime at night? If you don't work overtime, come and help!"

"Well, be careful on the road."

"Dudu..."

Before Xu Yang could reply, Deng Shan hung up the phone.

"Is there another Saigon artifact?"

Xu Yang guessed in his heart.

Since Deng Shan called, Xu Yang didn't have any ink marks, so he called an online car-hailing car and went straight to the brother mold factory.

　Rejuvenating the country through industry, CNC technology!
　　
　
(End of this chapter)