When NC apprentices have a task system

Chapter 32 Line... Red Alert!
Mission accomplished!
But what is the function of this machine tuning aid?
Xu Yang was a little puzzled.

After a while, Xu Hui also came, he went out to process it himself, and let the master tuner leave after making sure there was no problem.

For dinner, the two of Xu Yang randomly found a fast food restaurant to eat, and then went home to sleep.

……

……

The next day, Xu Yang came to the factory early.

As soon as he entered the workshop, Xu Yang saw a group of people chatting around the three-axis CNC machining center.

"Wow, is this a CNC machining center?"

"Tsk tsk, it is said that it cost more than 30 oceans, which is too expensive."

"that is!"

"Look, it also comes with a knife magazine?"

"Fuck, is this an infrared automatic tool setting device?"

……

Seeing this scene, the corners of Xu Yang's mouth trembled slightly, and he sighed helplessly.

Hey!
A group of melon-eating people who have never seen the world, unlike Brother, who has already started to use it in the past two days...Gah!
"Hey, Xiao Xu, come and take a look!"

"That's right, Xiao Xu, this is the most expensive machine in the factory."

"Xiao Xu, I heard that your assessment is related to this CNC machining center?"

When everyone saw Xu Yang, they started talking about it.

Just when Xu Yang was about to respond, a sneer suddenly came from behind:
"This is tailor-made for me, Zhong Xing, Xu Yang, did you just say you've seen it?"

Xu Yang frowned when he heard this and glanced at Zhong Xing coldly, feeling puzzled.

Isn’t Zhong Xing working the night shift?

At this moment, the sound of the system sounded.

"Ding! Zhong Xing, a CNC technician. Personal data is as follows."

Name: Zhong Xing

Occupation: CNC

Occupation Level: Lv4: 500/4000 (CNC Technician)

Basic skills:
Shaving edge: Intermediate: 8000/10000
Tapping: Intermediate: 8500/10000
Drilling: Intermediate: 9000/10000
professional skills:
Fluorine welding: Intermediate: 2000/5000
Programming: Intermediate: 4900/5000
Controller: Advanced: 8800/10000
Wire cutting: Intermediate: 2000/5000
Punch: Elementary: 800/1000
Milling machine: Intermediate: 2000/5000
Grinding machine: Intermediate level: 2000/5000
Electric Cremator: Primary: 800/1000
CNC machining center: intermediate 2000/5000
what!
Lv4 level?

Also secretly learned the CNC machining center?

No wonder he is so arrogant. His feeling is that his CNC technology has reached the level of a technician. Do you think you can take control of me?
snort!
Very insidious Zhong Xing.

Seeing this, Xu Yang was even more determined that Xu Hui was responsible for him, like a friend to his relatives.

Just imagine, if Xu Hui hadn't taken him to Deng Shan to learn CNC machining center, it is conceivable that on the day of the assessment, even if Xu Yang had a system, it would be too late.

Zhong Xing!Zhong Xing!
You never expected that not only did I learn CNC machining center on the weekend, but my career level was also promoted to Lv4. The most important thing is that Xu Yang’s CNC machining center technology is even better than Zhong Xing’s, especially the super constant temperature knife This bug!

When Xu Yang saw this scene, a sarcastic look suddenly appeared on his face.

He glanced at him very indifferently:
"You think you're going to get me?"

"Hmph, so what?"

Zhong Xing couldn't stop laughing wildly when he heard the words, and sneered again and again:

"The surname is Xu, you don't know. I actually gave up dating girls in Shuangzhou, and stayed in the hot and suffocating workshop, immersing myself in the CNC machining center.

Are you the one who has never even touched waste in a CNC machining center?Also worthy to be my opponent?

joke!

Wait until the assessment day on Wednesday, I want you to understand what is the world of difference?A frog in a well? "

"Humph!"

As soon as the words fell, everyone felt a strong smell of gunpowder, their eyes glanced at Xu Yang and Zhong Xing, and they were divided into two factions for a while.

Lao Liu is the only one who supports Xu Yang.

There are four or five people who support Zhong Xing.

Whoever is stronger on paper will be judged!

Xu Yang lost completely.

"What are you doing?"

"What are you doing?"

At this time, the supervisor Ling Xiaoming walked into the workshop, and then waved his hand to signal that it was time for everyone to work.

In the next second, the bustling three-axis CNC machining center was suddenly deserted, leaving only Xu Yang and Zhong Xing.

"Xiao Xu, Xiao Zhong, will you use this CNC machining center?" Supervisor Ling looked at the two and asked.

"Director Ling, Engineer Li took me to Tianheng Precision Mold Factory over the weekend and I was lucky enough to learn the CNC machining center for two days."

Zhong Xing was the first to show off.

"Yes, Not Bad!"

Ling Xiaoming was overjoyed when he heard the words, and immediately looked at Zhong Xing with softer eyes.

When he cast his eyes on Xu Yang, he couldn't help frowning.

I saw that Xu Yang actually ignored him, and kept staring at the CNC machining center. In the eyes of Ling Xiaoming and Zhong Xing, Xu Yang probably had never seen this kind of machine before, just a bumpkin.

However, Xu Yang at this moment encountered a difficult question. Just when Xu Yang was about to answer Supervisor Ling, the system's prompt sounded suddenly.

"Ding! The system has detected a defect in the circuit of the three-axis CNC machining center. Please use the machine adjustment auxiliary props for further verification. Do you want to use it immediately? Yes? No?"

"what's the situation?"

Hearing this, Xu Yang was taken aback.

Didn't this three-axis CNC machining center have been successfully tuned yesterday?
At that time, Xu Hui operated it a lot, and the accuracy requirements were up to standard. Xu Yang can testify.

However, out of trust in the system, Xu Yang still decided to use the machine adjustment auxiliary props, not afraid of ten thousand but just in case.

"Yes!" Xu Yang said hastily.

"Ding! The tuning auxiliary props are being activated..."

"Ding! It's on!"

"Ding! Start scanning the machine tool..."

With the scanning of the machine adjustment auxiliary props, Xu Yang synchronously scanned the machine tool from a God's perspective;

Hydraulic oil tank, full of oil: healthy and green!
The level and stability of machine tools: healthy and green!
CNC system setting parameters: healthy green!

Machine tool lighting, cooling shields, various guards, etc.: healthy and green!

Spindle: Healthy Green!

Tool magazine: healthy green!
Workbench: Healthy Green!
Suddenly detected a red warning at the position of the PLC line: danger red!

What the hell!

Is the line really faulty?

The PLC circuit can be said to be the nervous system component of the machine tool. As long as there is a problem with the circuit, the machine is bound to have frequent failures.

Thinking of this, Xu Yang decided to check the PLC circuit carefully.

"Xu Yang, what are you doing?"

Suddenly there was a roaring sound from behind, and Zhong Xing stood directly in front of Zhong Xing, deliberately scolding:

"You know this is a new machine tool you just bought. If you accidentally break it...you can afford it?"

Xu Yang frowned when he heard this, and then explained: "I think the PLC circuit of this CNC machine tool may be faulty?"

"Yo ho, return the PLC line?"

"Haha...Director Ling, did you hear that?"

"Xu Yang actually said that Huayue CNC Group's machine tuning master's skills are not up to par, and he also questioned it as a CNC apprentice?"

"I just...hehe!"

Questions like thunder spit out from Zhong Xing's mouth.

Seeing this, Ling Xiaoming pondered for a moment and felt that Zhong Xing was right.

This little Xu, what's going on?

The technician assessment is coming soon, why don't you study the CNC technology seriously, and actually start to study the machine adjustment?
Tuning...that's another science.

Any machine adjustment master is actually a professional at the level of a CNC technician. How dare Xu Yang, a CNC apprentice, dare to question this?

In Ling Xiaoming's eyes, Xu Yang is either crazy or broken, hum.

Thinking of this, Ling Xiaoming said directly:

"Xiao Xu, you go take charge of the fine engraving machine. As for this place, I will leave it to Zhong Xing for the time being."

"Hmph!" Zhong Xing glanced at Xu Yang provocatively.

"Director Ling, I think it's better to check it out, just in case?"

Xu Yang was very anxious when he heard the words.

"You know the shit!"

Zhong Xing turned on the machine directly, and started to operate it by himself.

"Hey!"

Xu Yang can't do anything about it, people speak lightly!

That being the case, Xu Yang could only shake his head helplessly, and then went to do his own thing.

At this moment, there was a bang behind him, and Xu Yang's heart tightened suddenly.

　Rejuvenating the country through industry, CNC technology!
　　
　
(End of this chapter)