When NC apprentices have a task system

Chapter 30
Thinking of this, Xu Yang asked: "System, Deng Shan's favorability?"

"Ding! Dungeon NPC Deng Shan's current favorability degree: 80!, the host has a certain chance to steal one of Deng Shan's skills. Reminder: Do you want to check his personal data panel immediately? Yes? No?"

80!

Stealing skills again... It's so cool!

"Steal!" Xu Yang hurriedly said.

"Ding! Stealing..."

"Ding! Stealing is successful, congratulations to the host for getting a piece of programming experience."

yeah!
It turned out to be programming experience. What Xu Yang lacks now is the level of programming skills, and he will soon be assessed as a technician.

"absorb!"

In the next second, a burst of code, tool path, milling amount, deep hole drilling, groove surface, curved surface... Countless pictures flooded into Xu Yang's mind.

sublimation!

Integrate!
"Ding! Congratulations to the host for successfully absorbing programming experience and gaining programming experience +1000!"

Yes, with another thousand experience, the programming technology is expected to enter the advanced level as soon as possible, and even full-level special effects.

But for now, let's check Deng Shan's personal data panel first.

"Ding! Dungeon NPC Deng Shan, a CNC technical engineer, the personal data panel is as follows."

Name: Deng Shan

Occupation: CNC

Occupation level: Lv10 8000/10000 (CNC technical engineer)

Basic skills:
Shaving edge: full level 10000/10000
Tapping: full level 10000/10000
Drilling: full level 10000/10000
professional skills:
Programming: full level 10000/10000
Operating machine: full level 10000/10000
Wire cutting: Advanced 9000/10000
Lathe: Advanced 9000/10000
Milling machine: Advanced 9000/10000
Grinder: Advanced 9000/10000
Cremator: Advanced 9000/10000
Test Fixture: Advanced 5000/10000
CNC machining center: Advanced 9900/10000
Mold Design: Advanced 9000/10000
I'm dizzy!

Level 10 boss!
High level...full level!
This is too luxurious, right?
After some shock, Xu Yang quickly calmed down.

If Xu Yang himself is the five scumbags in the CNC field, then Deng Shan is the one Xu Yang has seen the CNC ceiling, big boss!
This is a leek with a mutated growth, or a leek that is overripe, and it will rot and stink if it is not picked.

Thinking of this, Xu Yang suddenly became short of breath and out of control, wishing to cut him off right away.

No way, it's too tempting!

Deng Shan on the side suddenly had a feeling, he always felt something was staring at him, like a cheetah-like predator.

Just when he turned around to look, he just met Xu Yang's fiery gaze, and his face suddenly changed.

How could he not be familiar with this fiery gaze?
Suddenly a terrible thought popped up, could it be that Xiao Xu is crooked?

What the hell!

No wonder yesterday, his attitude towards Ms. Yang was so-so, at first he thought Xu Yang was a gentleman, technical idiot?
Now it seems that everyone has misunderstood him. Maybe Xu Yang is gay?

Deng Shan looked around, there were only the two of them in the huge mold factory, alone and widowed in a room...

Finished!

Finished!

I'm afraid I'm doomed today!

Just when Deng Shan was ashamed, Xu Hui just walked over:

"Old Deng, there is an urgent matter in our factory. Don't forget to provide one-stop service. Make it up to me next time."

"Xiao Xu, let's go!"

Deng Shan was overjoyed when he heard the words, and hurriedly said: "Okay, then you all go back first!"

Hey!
I finally sent Xiao Xu away, and now I am the pure me.

woohoo...

"Ah... well!"

Xu Yang originally wanted to stay here to enjoy the glory of Deng Shan, the upgrade was just around the corner, but it was a pity that Xu Hui showed up halfway.

Half an hour later, Xu Yang followed Xu Hui back to Xinsheng Hardware Factory.

"slower!"

"Lighten up!"

"put……!"

As soon as Xu Yang arrived at the factory gate, he heard a familiar voice.

When I got closer, it turned out that Ling Xiaoming, the workshop supervisor, was directing the forklift. What kind of machine did it seem?
Suddenly, Xu Yang had a flash of inspiration, and he thought of something.

The newly bought three-axis CNC machining center in the factory?

really.

After some careful operations, the true face of Lushan Mountain of the three-axis CNC machining center gradually appeared in front of several people.

Only then did Xu Yang know that the factory had temporarily decided to ship the machines in advance, so he called back his singles Xu Yang and Xu Hui. As for the others... they were either shopping with their girlfriends or taking care of their children with their wives.

Hey!
Being single is the original sin.

After the machine is bought back, it does not mean that it can be put into use immediately, but an important work needs to be done:

Debug new machine!

This CNC machine tool is Huayue CNC Group, which recently introduced new equipment from West Island, and Xu Hui bought it for 30 yuan.

Naturally, such an expensive machine cannot be sloppy. The supervisor Ling Xiaoming answered the phone and left. Before leaving, Xu Hui was asked to take full responsibility to ensure that the new machine can be put into use normally on Monday.

This time, Huayue CNC sent two master chefs.

The machine tuner was doing it with gusto, so Xu Hui got a little bored, so he simply went back to the rental house to sleep, and asked Xu Yang to cooperate with the machine tuner before leaving.

"Guaranteed to complete the mission!"

Xu Yang said depressedly.

Hey!
Why am I always the one who's hurt?
Thinking of this, Xu Yang became a little unhappy, but he didn't dare not listen to Xu Hui's words. Besides, this is also the task of the factory, and it seems that there is still a subsidy of 100 yuan.

For the sake of money, Xu Yang could only stand aside and play with his mobile phone while looking at it.

At this moment, the sound of the system sounded.

"Ding! Trigger the accompanying mission of the NPC tuner: Money +200! Experience +200! There is a certain chance of getting a machine tuning aid!"

"!!!"

"what's the situation?"

Xu Yang was taken aback.

Haha!

So cool!
He originally thought it would be a boring companionship, but the system actually gave him a task. Xu Yang sighed again:
Conscience system, you deserve it!

With a task, the style of painting changed suddenly, Xu Yang suddenly became busy as if he had been beaten with chicken blood, helping hand the screwdriver for a while, and picking up a piece of scrap for a while, which made the master tuner almost cry.

far away...

The purpose of debugging the CNC machine tool machining center is to check whether the installation of the machine tool is stable, and whether the transmission, manipulation, control and other systems are normal, sensitive and reliable.

The debugging and running work has the following steps:
1. According to the requirements of the manual, refuel a lubricating point, fill the hydraulic oil tank with the required hydraulic oil, and connect the air source.

2. After electrification, each component is powered separately or after each component is electrified for a test, and then fully powered.Observe whether there is an alarm in each part, whether it is normal to observe whether each part is manual, and whether each safety device works.Even every link of the machine tool can be operated and moved.

3. Grouting, after the initial operation of the machine tool, roughly adjust the geometric accuracy of the machine tool, and adjust the relative position of the disassembled main moving parts and the main machine.Align the manipulator, tool magazine, exchange table, position, etc.After these tasks are completed, the anchor bolts of the main engine and each accessory can be filled with quick-drying cement, and the reserved holes of the anchor bolts can be leveled.

4. For debugging, prepare various testing tools, such as precision level, standard square ruler, parallel square tube, etc.

5. Finely adjust the level of the machine tool to make the geometric accuracy of the machine tool within the allowable error range. Using multi-point pad support, the bed is adjusted to a level in a free state to ensure the stability of the bed after adjustment.

6. Adjust the position of the manipulator relative to the main shaft by manual operation, and use the adjustment mandrel.When installing the tool holder with the largest weight, it is necessary to perform automatic exchange from the tool magazine to the position of the main shaft for many times, so as to be accurate and free from collision.

7. Move the workbench to the exchange position, adjust the relative position of the pallet station and the exchange workbench to achieve a stable automatic exchange of the workbench, and install the maximum load of the workbench for multiple exchanges.

8. Check whether the setting parameters of the numerical control system and programmable logic controller plc device conform to the specified data in the random data, and then test the main operating functions, safety measures, and the execution of common instructions.

9. Check the working conditions of the accessories, such as the lighting of the machine tool, the cooling shield, various guard plates, etc.

Until the evening, several tuning masters finally completed the tuning work.

At the same time, the sound of the system came as promised.

"Ding! The accompanying mission of the NPC Tuning Master is completed: Money +200! Experience +200! One tuning auxiliary item!"

　Rejuvenating the country through industry, CNC technology!
　　
　
(End of this chapter)