When NC apprentices have a task system

Chapter 24 Reckless?

……

……

Brother Mold Factory, a group of people were discussing around the computer desk.

"Old Xu, do you think Xiao Xu can do it?"

"I don't know? But he looks quite serious."

"Xu Yang?"

"Baga, the Huaxia people will let you be proud first, and if it doesn't meet the standard after processing later, hum!"

Xu Yang didn't pay attention to the scorching gazes of the people behind him. At this moment, he had already calmed down, and his usual casual attitude was swept away, revealing a confident smile.

"call……"

Xu Yang took a deep breath, and then inserted the card reader of Yamazaki Mosaic into the USB port.

Reading Drawing Documents...

Import UG programming software and start the super UG programming simulator simultaneously.

As the virtual screen appeared out of thin air, the sound of the system came as promised.

"Ding! The system detected a drawing of Saigang's indenter workpiece. The programming difficulty coefficient is Lv5, which meets the conditions for exceeding two levels. Do you want to enter the automatic programming mode immediately? Yes? No?"

"Yes!" Xu Yang said hurriedly.

"Ding! Scanning is on..."

"Ding! The scan is complete!"

"Ding! Programming complete!"

In a few breaths, the system has completed the processing program of the Saigang indenter.

Because of the special situation, Xu Yang carefully checked the processing program compiled by the system this time, and then compared the previous processing path and milling amount of XCMG from memory. As a result, the programming of the system was more perfect, worthy of being produced by the system.

After the simulator is programmed, the next step is to copy it.

"here we go!"

"Well, is a CNC technician strong? You can get a general idea from the programming."

"UG? The programming software is good, but it's a pity that it's not professional enough. It's best to use Mas CAM for processing this kind of product!"

Seeing Xu Yang open the UG, Yamazaki Mosaic shook his head and dismissed it.

"This Xu Yang has a bright future!"

Different from the contempt and disdain of Yamazaki Mosaic, Yang Yue saw the spirit of craftsmanship of a great country and a rigorous and serious attitude from Xu Yang.

"Oops, I forgot to tell Xiao Xu about my programming documentation, it's over now!"

Suddenly, Xu Hui's face changed suddenly, and he was secretly blaming himself.

"What's wrong? Old Xu?"

Deng Shan on the side immediately noticed the change in Xu Hui's face and asked.

"Old Deng, Xu Yang has only been learning CNC programming for less than two days. He must not be able to independently complete the processing and programming of Saigang's indenter. It's all my fault."

"what?"

Deng Shan was stunned and almost blurted out. If Xu Hui hadn't acted quickly and covered his mouth, he would have lost his fortune.

Just when everyone doubted Xu Yang's programming ability, Xu Yang had already turned on his power and started the plagiarism mode.

Split the drawing document.

Draw independent drawings of each surface, and then quickly design the machining path, tool selection, and milling amount...

Under everyone's horrified eyes, Xu Yang's hand is like the shadowless hand of a keyboard man. No, it should be like a 10000-speed spindle. It's just a burst of clicking like a tiger, and the programming is over in less than 5 minutes.

"Fuck, is this already edited?"

"Xiao Xu, isn't this too fast?"

"Old Xu, are you hiding deep enough?"

Deng Shan gave Xu Hui a blank look.

"low profile!"

Hiding your sister, I am more surprised than you.

Xu Hui pretended to be calm, but looked at Xu Yang with a look of anticipation, maybe he can really pass the test?

"Is he really an apprentice?" Yang Yue's beautiful eyes rolled.

"Hmph, it's just a gimmick. This NC apprentice actually messed around in order to show off in front of Ms. Yang. I, Yamazaki Mosaic, will just watch you for a while... The program is messed up, the knife is broken!" Yamazaki Mosaic seemed to have seen it, and Xu Yang was ashamed The scene is average.

As soon as Xu Yanggang finished programming, everyone exploded.

However, Xu Yang had no way of knowing this. Now he had already devoted himself to programming. He just wanted to perfectly demonstrate his skills and complete his works.

After programming, the next step is processing.

I saw Xu Yang import the compiled program into the card reader, and then came to the three-axis CNC machining center.

Power on!
Reset!

Upload the program!

All in one go.

Because the standard given by Yamazaki Mosaic is to finish processing within 30 minutes, although Xu Yang also wants to enjoy the worship of everyone while performing, but in order to better face Yamazaki Mosaic, Xu Yang can only process it at the fastest speed.

The program import is complete.

Xu Yang started the three quick preludes again: counting the clock, scoring points, and fighting the knife.

Knife... Xu Yang has secretly replaced it with a super constant temperature knife.

"It's up to you, super constant temperature knife!"

The moment he fixed Sai Gang and closed the protective door, Xu Yang couldn't help but hold his breath and clenched his fists, success or failure depended on it.

It's time... to get serious!
"Om..."

As the main shaft rotated, Xu Yang was shocked, and the blood in almost his whole body boiled, and the moment of burning passion came.

"Om..."

Under the high-speed operation of the spindle at 10000r/min and the feed rate at 200r/min, the super constant temperature knife milled by at a very high speed. Xu Yang stared at the virtual thermometer on the super constant temperature knife, which made him feel incredible that the temperature did not change. After being changed, the constant temperature is truly achieved, and under the blessing of sharpness +2, Saigang is as crisp as tofu, and there is no trace where the knife passes, which can be called a perfect presentation.

At this moment, bursts of startled sounds sounded again and again.

"Xiao Xu...too reckless? This kind of high-standard and demanding workpiece is still Saigang, but the spindle and feed are pulled to the limit. In this way, the heat generated by the tool will only increase, and the amount of deformation will be even greater. getting bigger."

"It's too reckless! I thought you found another way, but you turned out to be a stunned young man?"

"This speed...?"

"Quack, I'm just saying that this Huaxia NC apprentice is all over the place, thinking that the faster the speed, the smaller the amount of deformation will be? Naive!"

Those present were either masters or people in the CNC industry. Almost no one was optimistic about Xu Yang, and they all felt that the deformation of the processed workpiece must be outrageous.

After 15 minutes, the machine stopped.

"come on!"

Xu Yang took another deep breath, then nervously opened the protective door, and used an air gun to blow off the Saigang shavings on the workpiece, immediately revealing the formed Saigang indenter workpiece. The white Saigang indenter looks good.

"Not bad, but I don't know how the tolerance is?"

Xu Yang sized it up and said secretly.

Due to his overconfidence in the system, Xu Yang was not so worried. He was a CNC apprentice anyway, so what if he was embarrassed?
After taking off the workpiece, Xu Yang brought the Saigang indenter workpiece in front of Yang Yue, and said with a calm expression:

"Miss Yang, inspection?"

"Oh, Mr. Yamazaki gave it to you."

Yang Yue was taken aback, and then said to Yamazaki Mosaic.

I saw that Yamazaki Mosaic took the workpiece, took out the Nishidao country brand that had been prepared earlier - Mitutoyo caliper, and started measuring the size.

"Xiao Xu, are you sure?"

"Xiao Xu, you're so reckless!"

Taking advantage of the gap between Yamazaki's mosaic measurements, Xu Hui couldn't help asking.

Reckless?

Xu Yang was stunned for a moment, touched his nose, secretly felt that this title seemed pretty good, and said with a faint smile:

"Don't worry, two masters, you just wait to see how the little G eats melons."

This scene happened to be witnessed by Yang Yue, and she couldn't help being puzzled:

"Is he really that confident?"

It is said that after Yamazaki Mosaic began to measure the size, the more he measured, the more shocked he was, because the accuracy was within 1 wire after measuring several times, which is incredible.

At this moment, Yamazaki Mosaic put away the previous arrogance and disdain. For such processing accuracy, it is indeed better than those so-called masters before. I just don’t know how much deformation will be measured in the second measurement later?

To be honest, I am looking forward to Yamazaki Mosaic. Technology has national boundaries, but the CNC spirit knows no borders.

A highly skilled CNC person deserves respect from everyone.

Thinking of this, Yamazaki Mosaic changed his previous arrogant attitude and raised his index finger to everyone:
"One thread!"

As soon as the voice fell, the scene was dead silent.

　Rejuvenating the country through industry, CNC technology!
　　
　
(End of this chapter)