When NC apprentices have a task system

Chapter 225 Fit 100%! ! !

"Helmet fit appraisal in progress..."

"The identification is complete, the fit is 100%!!!"

The mechanical beep sounded.

Before Xu Yang could react, the mechanical virtual helmet was already put on his head.

"compatibility???"

Just when Xu Yang was puzzled, he found that there seemed to be something extra in his head, as if he himself was this CNC machining center robot? ? ?

Xu Yang tried to move his arm, but he saw that the mechanical arm of the CNC machining center robot also moved? ? ?

Fog grass! ! !

What's the situation? ? ?
Xu Yang was dumbfounded. This was the same feeling as the protagonists in the movie driving Gundam Fighter.

In order to verify his idea, Xu Yang tried to move his hands and feet again, and sure enough, he and this CNC machining center robot became one! ! !

Don't know Shangguan Qiuyue and the others? ? ?
Xu Yang couldn't help but steer the robot of the CNC machining center, the purpose was to see the performance of Shangguan Qiuyue and the others.

However, when Xu Yang turned around, he saw that Shangguan Qiuyue's CNC machining center robot didn't seem to be moving at all? ? ?
So Xu Yang controlled the CNC machining center robot and walked step by step towards Shangguan Qiuyue who was closest to him.

……

On the other side, Professor Lao Tie was observing every move of Xu Yang and the others.

To be honest, Tie Shikai didn't have too many expectations for Xu Yang and the others, because he didn't know how many geniuses like Xu Yang had seen.

However, there are very few talents who can really be recognized by CNC robots.

Don't look at the whole 303 Research Institute as mysterious, in fact, that's all there is to it.

As the saying goes, special personnel do special work! ! !

The purpose of Huaxia 303 Research Institute is actually to study creatures from different spaces? ? ?

For example, these CNC robots in front of you! ! !

Tieshikai is just a professor on the periphery of the 303 Research Institute, and it is these robots that have access to secrets. As for the secrets of other different spaces, only core personnel can know them.

Over the years, Tie Shikai has sent batches of outstanding talents to the core research institute, but the core research institute still allows him to continue to send outstanding talents.

To be honest, Tie Shikai really wanted to enter that mysterious place to find out.

There are a few more geniuses in this batch than in the previous period, but it is uncertain how many will stay in the end.

When Xu Yang and the others entered the CNC machining center robot, Tie Shikai stared at them intently.

His eyes started with Shangguan Qiuyue, followed by Ren Boan and Han Guorong. However, the performance of these three people was a bit unsatisfactory.

In Tie Shikai's brain, the simultaneous live broadcast mode has long been turned on, that is, every move of Xu Yang and the others can be clearly seen in front of him.

What Tie Shikai likes is the fit between humans and CNC machining center robots? ? ?
What is fit? ? ?
In fact, the so-called fit is the degree of recognition of the CNC machining center robot to the operator! ! !
To put it more simply, this is like the intimacy between cavalry and their companion horses on the battlefield! ! !
A powerful cavalryman, he must be a good rider, otherwise how can he be invincible? ? ?
In the same way, the CNC machining center robot in front of us also needs a partner who fights side by side.

As a CNC machining center robot with certain life characteristics, the driver is like its brain. Only when they are combined with humans can they be a real independent life, and they are the Gundam fighters in those movies! ! !

That's why Tie Shikai pays so much attention to fit! ! !
According to the information transmitted in the synchronous live broadcast mode, the compatibility of Shangguan Qiuyue and several people are:

South Korea won 60%! ! !

Ren Boan 70%! ! !

Shangguan Qiuyue 80%! ! !

As for the compatibility of Shangguan Qiuyue and the others, Tie Shikai seemed to have expected it. The same was true for the previous geniuses, most of them were 60%~90%! ! !

According to the instructions of the core research institute, as long as the fit exceeds 60%, you can pass the test.

"Yes, Not Bad!!!"

Tie Shikai looked at the compatibility data of Shangguan Qiuyue and the others, and couldn't help smiling slightly.

Originally, he only needed to transport two talents at a time to complete the tasks of the core research institute. However, this time he overfulfilled the task.

With the backing of the first three people, it can be said that Tie Shikai is indifferent to the last Xu Yang.

Even if Xu Yang's compatibility is zero, it will not affect Tie Shikai's task assignment in the slightest.

"Xu Yang, the fit is 100%!!!"

However, at this moment, Tie Shikai's mind just sounded Xu Yang's fit data information.

It was this information that almost didn't scare Tie Shikai? ? ?

"what???"

"Fitness 100%!!!"

Tie Shikai was taken aback when he heard the words, and couldn't help exclaiming immediately, the way he looked at Xu Yang changed again and again.

100%? ? ?

Fog grass! ! !

Super genius! ! !
Even though Tie Shikai has been in this industry for more than 20 years, so far, he has not met a peerless genius who is 100% compatible! ! !

He vaguely remembered that among the peripheral personnel of the 303 Research Institute, it seemed that the highest degree of fit was only 95%! ! !

This just shows that Xu Yang is very powerful! ! !
He must be super talented! ! !

This time, Tie Shikai finally managed to keep the cloud open and see the moon, who would dare to look down on him as a peripheral professor? ? ?

Thinking of this, Tieshikai decided to pay special attention to Xu Yang, which was his biggest support for turning around.

……

Just when Tie Shikai was amazed, Xu Yang also walked up to Shangguan Qiuyue, and saw him touch Shangguan Qiuyue's CNC machining center robot with his mechanical arm.

"Clap clap..."

Because the two CNC machining center robots are both mechanically manufactured, they inevitably make a bit of noise when interacting.

Perhaps it was due to the lack of strength, Xu Yang's clapping almost knocked Shangguan Qiuyue's CNC machining center robot to the ground? ? ?
"Mist Grass, too much force!!!"

As the person involved, Xu Yang sighed as he watched the CNC machining center robot staggering back a bit.

Xu Yang swears to God, he definitely didn't do it on purpose.

Thinking of this, Xu Yang hastened to run away before Qiangguang Qiuyue could react.

"Da da……"

"Frozen..."

Xu Yang pulled away his pace, then ran towards his own territory with his head down.

It is said that when Shangguan Qiuyue entered the belly of the CNC machining center robot, she knew something.

Sure enough, it is still a test of human fitness! ! !

As for why Shangguan Qiuyue knew this? ? ?

The reason is very simple. She is from the J side. As China's first line of defense, she will definitely receive some black technology from the 303 Research Institute.

Such as aerospace engines! ! !
Six generations of super fighters! ! !
There are also various robots! ! !
That's right! ! !

Why has China's J factual strength developed rapidly in recent years? Didn't the sixth generation of super fighters, spaceships, aircraft carriers, etc. all appear in these few years? ? ?

In fact, most of these things come from the 303 Research Institute, which is the research results of the old professor in front of me.

Huaxia Air Force J also has some war robots, but they are still a little less intelligent than the CNC machining center robots in front of them.

In the past, Shangguan Qiuyue had a high degree of fit in controlling war robots, but this time she couldn't accept it.

"80%???"

　Rejuvenating the country through industry, CNC technology!
　　
　
(End of this chapter)