When NC apprentices have a task system

Chapter 17 Three-Axis CNC Machining Center
Good guy!
Another task.

It's still a copy NPC task, the rewards are more generous than the regular task rewards.

Seeing that Xu Yang didn't speak, Deng Shan continued:

"And I have some understanding of your level. It's very good, and your basic skills are very solid. I can't guarantee you anything else. You come here for a day, whether you do something or not. The basic salary is 200 yuan a day. If you can program and process parts independently, I will give you a 20% commission no matter what the work is."

"Don't be too small. You know a little bit about the profits of CNC machining. In addition, the loss of equipment is relatively large. A 20% commission is a lot for you. Don't worry about the order. You should be a good assistant." Just do it."

Speaking of this, Deng Shan got up and poured tea for the two of them: "Since you are Lao Xu's apprentice, then you are my apprentice. You seem to be on the day shift this month. How about this, when I am busy at night, I will directly give You call, come here as much as possible, and get familiar with it as soon as possible. Get started as soon as possible!"

At this time, Xu Hui also persuaded:
"Xiao Xu, it's a rare opportunity!"

Hearing this, Xu Yang wanted to hug Xu Hui excitedly, and Deng Shan kissed him. This is simply a combination of mentor + God of Wealth. Suddenly, the blood in his body was running at high speed like a 5000-rpm spindle Come on, I can't stop at all!

No, adrenaline is also fed 5000!

"Thank you very much, Mr. Deng. From now on, I will be your little follower. I will mill wherever you point."

Deng Shan took a sip of tea and said, "Haha! Don't use me as a tea table to dig a hole, you kid, it's too expensive."

After finishing speaking, Deng Shan looked at Xu Yang and the two of them again and said:

"I really doubt it, by the way...Xiao Xu, you and old Xu both have the surname Xu, so aren't you real brothers?"

Xu Yang was taken aback for a moment, and suddenly his eyeballs moved: "Mr. Deng, actually, according to the genealogy, why does Lao Xu still call me uncle?"

Speaking of this, Xu Yang asked a little nervously: "Xugong, right?"

Deng Shan: "Old Xu... is it true?"

Xu Hui's face turned cold when he heard the words, and the temperature of the hot and suffocating big iron boron suddenly dropped, as if he was in an ice cellar, and said with a sneer:
"Oh, really?"

"Well, Mr. Deng... where is the toilet?"

When Xu Yang saw this, he quickly made an excuse and ran into the bathroom. He didn't want to be caught and beaten by Xu Hui.

……

……

After a while, Xu Yang came out of the bathroom and saw Xu Hui and Deng Shanwei discussing something in front of the CNC machining center.

Xu Yang approached.

"I'm dizzy and deformed again."

Deng Shan stepped on the threshold of the machine platform with one foot, and measured the size of the workpiece with a caliper in one hand, then shook his head and said.

"It's normal. Saigang is a material that is easily deformed."

Xu Hui took the words and continued:
"Otherwise, why did they send it out to you?"

Sai Gang?

Xu Yang was taken aback when he heard the words, what kind of material is this?
Not knowing that there was a problem in the processing of the workpiece, Xu Hui took Saigang and went to the computer to modify the program.

After Xu Hui left, Deng Shan waved to Xu Yang and said:
"Xiao Xu, I'm here to teach you the basics of CNC machining centers."

When Xu Yang heard this, his eyes lit up immediately:
"really?"

Originally, Xu Yang thought that these two days were mainly doing odd jobs, but he didn't expect to have the opportunity to learn so soon.

You have to cherish it!

Deng Shan chuckled and said, "It's not true? Is it still cooked?"

Seeing Deng Shan Yuye's expression, Xu Yang immediately said gratefully; "Then thank you Mr. Deng."

Deng Shan laughed and scolded: "Don't be too happy, if your learning effect is too poor, I don't want to waste time, after all, for the mold industry, time is money.

"En." Xu Yang said calmly.

I'm dizzy!

As expected of a boss, this style of doing things is intimidating.

"Do you know the biggest difference between CNC machining centers and engraving machines?"

"do not know."

Xu Yang pricked up his ears and listened carefully.

Deng Shan expressed satisfaction with Xu Yang's serious attitude towards learning.

So he pointed to the CNC machining center and continued:

"The Jingdiao machine is just a simplified version of the CNC machining center, which has certain limitations and is mainly used to make products. The machining center is more comprehensive and can process most of the workpieces, especially the mold parts."

My machine is a 3-axis vertical machining center, which belongs to the FANUC CNC system.

Next, I will tell you the basic knowledge about operating the machine, but you are a CNC apprentice, so I will give you an overview.

The first is to boot!
Emergency stop button!
Back to reference point!

To release overtravel, press the reset button directly.

([-]) Manual continuous feeding!
([-]) Handwheel feeding!
([-]) The establishment of the program, I need to focus on this:
In the FANUC system, to create a program, the program number must first be input and stored, and then the program word must be input.The specific operation is as follows:
(1) Open the program protection lock, put the working mode in [EDIT] mode, and the indicator light of this key is on;
(2) Press the [PROG] key to enter the program editing screen, input the address "O" and the program number to be created, such as O0001, press the semicolon [EOB] key, and then press the [INSERT] key to create a new program O0001 ;

(3) Input the words of each program segment one by one, after inputting each program segment, press the semicolon [EOB] key, and then press the insert [INSERT] key until the input of all program segments is completed.If the program word is entered incorrectly, press the [CAN] key to cancel, and press the [CAN] key continuously to cancel multiple words.

([-]) Editing steps of the program:

Program editing includes operations such as modification, insertion, replacement, and deletion. The specific operations are as follows:
(1) Replacing characters: Use the cursor moving keys to move the cursor to the word to be replaced.After inputting the characters to be replaced, press the [ALTER] key.

(2) Inserting characters: use the cursor movement keys to move the cursor to the previous word to be inserted, input the character to be inserted, and press the [INSERT] key.

(3) Delete characters: Use the cursor movement keys to move the cursor to the word to be deleted, and press the [DELETE] key to delete.

([-]) Operation steps of calling the program:

Call the existing program in the memory, edit or prepare for automatic processing, the specific operation is as follows: put the working mode in the editing [EDIT] mode, and the indicator light of this key is on.Press the program function [PROG] key, and input the program number, such as O0001.Press the cursor down key to invoke the program.If the program exceeds one page, you can press the page up and down keys to view the program.

Seeing that Deng Shan had talked a lot, Xu Yang probably felt a little thirsty, so he hurriedly handed him the teacup.

"Understand?"

Deng Shan smiled knowingly, took a sip of tea, and asked.

"Ding! Deng Shan's favorability +5!"

"Fortunately!"

Xu Yang smiled embarrassingly.

Really.

After all, Xu Yang is a CNC apprentice, and the engraving machine and the C CNC machining center are of the same origin, so even if he is not familiar with the system control panel, he still knows a little bit about it.

"Ah."

Deng Shan, who had just put down the teacup, saw Qin Yang's expression, and said with a smile:
"Then you do it."

Next, Xu Yang perfectly demonstrated the basic process of operating the machine, and the more Deng Shan looked at it, the bigger the smile on his face.

I saw him change the subject and said seriously:
"Yes, now that you are familiar with the operation process, the next step is the actual processing."

　Rejuvenating the country through industry, CNC technology!
　　
　
(End of this chapter)