When NC apprentices have a task system

Chapter 11 Call Me Shisai!

After finishing speaking, Boss Shi turned around again, held Xu Yang's hand again, and said with a gratified smile:
"Xiao Xu, Xu Gong has already told me about your matter, you are too low-key."

"Of course it's all my fault that I don't pay enough attention to you. Hey, I regret it. Such a great god should be a C super god, but I put him on the bench. He shouldn't, he shouldn't!"

"Boss Shi, actually...?"

Let go!
Xu Yang's face changed suddenly when he heard the words, and he pulled away a minute's stick again. There was no way Boss Shi was too crazy. Anyway, Xu Yang was scared.

"Call me Shi Sai! We are all our own people, it's too strange!"

"!!!"

I'm dizzy!

Xu Yang was taken aback when he heard the words, and greeted him with a forced smile:

"Stone plug!"

It turns out that people in Guangdong Province call their boss Lao Sai, but in fact everyone calls Boss Shi Shi Sai in private, just like calling a pretty boy and pretty girl, friendly and friendly.

"Ding! Shisai's favorability +5!"

what!
Why did my brother help the factory a lot anyway, why did Shi Sai's favorability score only +5 points?
It seems that I am not Shisai's dish, am I wrong to blame Shisai?

But his behavior... is really unbelievable!

"Actually, it's all taught by XCMG!"

Seeing this scene, Xu Yang breathed a sigh of relief.

"Well, well done!"

"I... take good care of you!"

Shi Sai patted Xu Yang on the shoulder again, then smiled at Xu Hui:

"XCMG taught well!"

"Good job!"

Xu Hui was taken aback when he heard the words, then looked at Xu Yang with relief, and thought to himself:
"Xiao Xu, you are very good at life."

"It seems that in the future, I still have to give him a little trouble. The mechanic assessment is imminent!"

What Xu Yang didn't know was that his unintentional actions actually helped him pass the difficulty of the mechanic assessment.

"Ding! Collective NPC favorability +5 respectively!"

"Li Zheng favorability -10!"

yeah!
Xu Yang gained a lot of goodwill, and he was very happy.

But why is Li Zheng's favorability negative?
Forget it, who cares?

When Xu Yang was observing Li Zheng, Li Zheng seemed to have something on his mind, and there was a gloomy look in his eyes that seemed to be praising.

At this moment, the idiot Old Liu picked up the jig again and said:
"Boss, how about I go deliver the goods right away?"

"Why, hehe... I just want good things."

"Who is the boss?"

"Hey, I said Shi Sai, don't be so kind as a donkey. Today is the day when you help the children with their homework. It is not a trivial matter to spend a morning out of the boss's wife without telling the truth. Maybe the boss will blame you. Enough for you to drink a jug."

"Do you think I'm robbing you of a girl?"

"Old Liu, if you want to say something like this, then we have to talk to each other face to face, drum to drum."

"This is no ordinary delivery, this is silky smooth.

Besides, I still expect it to slap Qianshida in the face of procurement, and then raise the price of jigs, killing two birds with one stone! "

"Shisai...?"

"Old Liu...?"

I'm dizzy!

It turns out that you two are... true love.

Looking at Shi Sai and Lao Liu, who were fighting to the death to deliver goods to Qianshida, blushing, and almost fighting, Xu Yang said that this strange scene is really a long time to see.

Xu Yang suddenly thought of a classic episode of a TV series, the sideline activity of Li Yunlong and Kong Er, the handsome swordsman, competing for hundreds of horses.

Isn't it the same as these two people in front of you?
The first level of the official rank crushed people, and Lao Liu finally succumbed to Shi Sai's majesty, but the little foot bath prince was naturally not the one who suffered, so he stuffed the Donghai Foot Bath City VIP card that Shi Sai secretly gave him into his pocket, and hummed Xiao Qu started to repair the mold.

Seeing the two secretly communicate the song, Xu Yang sighed again.

Although he had gone through the little episode just now, Xu Yang was still an apprentice and was naturally very busy.

No wonder Xu Hui arranged another task for him, an assembly task.

"Ding! Trigger the task of the NPC CNC master Xu Hui: assemble two sets of test frames within one hour, requiring clean edges, no crooked drilling, and no slipping of the tapping teeth. Task completion reward: money +200! Experience +200! Xu Hui A piece of experience in repairing the test frame!"

"Ding! Do you accept? Yes? No?"

"Half an hour, right? Guaranteed to complete the task."

With the blessing of confidence, Xu Yang replied happily.

"Well, don't let me slip your teeth, the drill is crooked?"

Xu Hui ordered again, and then left the workshop.

After Xu Hui left, Xu Yang turned his attention to the parts of the test frame that he had made in the morning, and secretly cheered himself up:

"Xu Yang, you can do it too."

The Xinsheng Hardware Factory where Xu Yang works is a small factory, so there is no servo tapping machine or automatic drilling machine here, only one electric drill.

Pure handwork!

The first step in assembly is: drilling.

Drilling needs to pay attention to the following points:
First, drill the holes vertically.

Second, drill the hole clockwise and exit counterclockwise.

As long as you master these two points, you can basically drill independently.

Xu Yang was unable to drill vertically before, and needed to use a vise to clamp it, otherwise it would be easy to drill crookedly. If this is done, the drilling speed will be greatly reduced, and it will be much slower. Basically, Xu Hui completed two sets of work. He barely put together a set.

Hey!
No way, this is the technical gap.

Also, once the hole is drilled crookedly, it will affect the subsequent tapping, and the assembly will not be in place.

So drilling is all prerequisites for assembly.

There is another point here. The workpiece is generally drilled in the center of the hole, so that the assembled things are beautiful and symmetrical. Therefore, the general novice will use a caliper to measure, that is, draw a cross, and then take the center point of the cross to drill.

"All-pervasive, it's up to you."

The next second, Xu Yang took a deep breath, then picked up the electric drill and switched it on, "Omm..." With the buzzing of the electric drill, Xu Yang's passion was also aroused.

Just when he was about to drill the hole, Xu Yang's face suddenly changed. He forgot to use the caliper to draw the center point, and Ma De was careless.

"not good!"

But his hand subconsciously went down, and Xu Yang found that he couldn't control his hand because he was too nervous.

"How to do?"

Countless thoughts popped up all of a sudden, master Xu Hui's disappointment, Shi Sai's scolding, Zha Zha Xing's falling into trouble...

"what!"

"This is……?"

Suddenly a red dot appeared out of thin air on the workpiece, Xu Yang was surprised to find that the red dot was not the center point, and now it was his turn to be puzzled.

When will I draw points automatically?
Could it be that I am dazzled?

Xu Yang shook his head, and found that the red dot was still there, not a hallucination.

do not care!
"Om..."

Look at the red dot, turn it clockwise with the electric drill, then withdraw it counterclockwise after a second, and you will see a vertical, centered hole with a depth of exactly 1/3 of the workpiece.

"Nice!"

Looking at the perfect Kong in front of him, Xu Yang couldn't help but exult.

　Rejuvenating the country through industry, CNC technology!
　　
　
(End of this chapter)