Chapter 54
Ge Xiaohua made a Miao Dao, but because of the failure of quenching and insufficient steel, it broke. The length of the Miao Dao is about 1 meters. The Ming Dynasty was the favorite of the cavalry, but the blade was always flat. Under a huge blow, how to achieve both rigidity and softness is a key technological process of the Miao knife, and such a long knife can be used in actual combat. , it can be seen that this aspect has been solved, but it is now lost.

"There is no breakthrough!" Ge Xiaohua shook his head, and threw the failed Miao Dao into the scrap iron pile, and his scrap iron pile is very particular, the left side is ordinary pig iron, the right side is fine iron, obviously the pile on the left A bit, Ge Xiaohua used up some of the fine iron on the right, melted it to make an anvil, and planned to use the rest of the waste fine iron to make hammers, pliers and other blacksmithing utensils, and now I have a bright anvil Ge Xiaohua knew that the quality of the melted refined iron was good.

"I asked for fifty cents a catty of scrap iron in the county, so I might as well keep it." Ge Xiaohua's blacksmithing skills have gradually improved, and the blacksmith's level has reached LV3. Although there is still a distance from LV4, these scrap iron If you sell it to a scrap yard, you will lose a lot of money, and you are not willing to give it up. Therefore, you can try to make some farm tools, common ironware, etc. As long as it is not used to forge cold weapons, the effect is almost fine, and the superb technology can cover up the material. Weaknesses, Ge Xiaohua still has this confidence.

At first, Ge Xiaohua didn't use these scrap irons, because he also considered the reputation of Ge's blacksmith shop. The early word-of-mouth is still very important. In addition, the technology is not very good, so he can only carefully select the raw materials. In addition, Ge's blacksmith shop Scrap iron is rarely used for forging, so Ge ​​Xiaohua has accumulated so much scrap iron, all of which are products of failure. Similar to pottery, many pottery factories and red brick factories will have a large number of discarded defective products. It is a pity that these They are all unusable and can only be used as garbage. One of the benefits of blacksmithing is that the defective products can be reused and thrown into the furnace to reduce the waste of resources.

Ge Xiaohua knows that these scrap irons will not be wasted, and they can be regarded as a "strategic reserve" of the blacksmith's shop. They can still be used in the state where a large amount of pig iron is required to make some. After all, the quality of these irons can still be guaranteed, as long as the materials are not made Cold weapons with higher requirements have little effect.

"It's meaningless to fight again. You can give up the seedling knife. If you haven't studied the advanced manufacturing process of the seedling knife, it is not appropriate to waste time on failed products. You can change your mind." The flexible control is still a bit weak. It may be that the forging method is wrong, or there may be some accidents during quenching. In any case, Ge Xiaohua has some problems in making a qualified seedling knife. Considering the time is urgent, prepare To participate in the Hong Kong Cold Weapons Exhibition and Exchange Conference, Ge Xiaohua represented Ge's blacksmith shop, so he had to change to a different type of knife. Miao knife can be studied later, and there is no rush.

Caressing the green light anvil, Ge Xiaohua saw emerald light oozing from the half-person-high anvil, Ge Xiaohua suddenly felt full of strength, the shadow of failure was swept away, and the prototype of a knife appeared in his mind , thinking of creating it immediately.

"Is this the effect of the newly hammered anvil? Does the heart of a blacksmith arouse the emotion of blacksmithing?" Ge Xiaohua thought to himself, but without stopping the tool in his hand, he took a piece of fine iron and threw it into the stove to heat it up, and it burned red , clamped with pliers, hammered and shaped on an anvil, the temperature cooled, and then thrown into the furnace to heat, so as to forge a suitable blade.

"It's too hot!" Ge Xiaohua took off his undershirt, revealing his strong muscles. He just put on a leather apron with a knee-high bib to prevent iron splashes from splashing on his body.

The perfect body shape is obtained through hammering and hammering. Ge Xiaohua has been next to the stove all year round, with its own heating system, and sweat evaporates fat, so there will be no effect of obesity. High physical exercise has improved Ge Xiaohua's physical fitness Quite a lot, it is a world of difference compared to before.

But there is also one point, that is, occupational sequelae, such as back pain and respiratory effects.

The back pain is caused by standing and beating iron tools frequently, and the repeated movements will pull the waist up. On the other hand, the respiratory disease is caused by the dust and carbon dioxide produced by burning charcoal, as well as the impact of the working environment.

Ge Xiaohua has also noticed this aspect. After learning from the outpatient department of Shande Dong Medicine, Ge Xiaohua not only learned some knowledge of medicinal materials, but also had some understanding of some aspects of health preservation, maintenance, and prevention of the body, so he will go to the clinic when he has time. Pick some medicinal materials, explain the situation to Dr. Liang, and prescribe medicine and stickers. You can't treat it only when it is serious.

Every occupation is not easy, and you may get occupational diseases, so Ge ​​Xiaohua is not immune. His advantage is that he has learned some basic knowledge of medicines, and has a preliminary understanding of the theory of Dong medicine, the six natures and six flavors, and the core five-in-one thought.

Occupational diseases require timely diagnosis and treatment, but at this moment, in a state of high concentration, Ge Xiaohua's blacksmithing movements are smooth and smooth, and every step is done perfectly, without being affected by the previous ones, the attribute bonus produced by the anvil is the first time It feels so deep.

The rhythmic sound of blacksmithing came from the blacksmith shop, and the passing villagers were amazed and commented, thinking that Ge Xiaohua was so capable at such a young age, and he worked so hard to forge iron. The future of Ge's blacksmith shop is still very bright. The most important thing is It's quite unusual for a college student to go blacksmithing. In addition to the rare blacksmiths nowadays, the label of a college student has also attracted a lot of attention to Ge Xiaohua.

"I succeeded!" Ge Xiaohua let out wanton laughter. This was the first time he was so happy. After failing many times, he ushered in success. The knives produced are not seedling knives, let alone the mainstream knives that can be seen now.

It is an almost original knives, which are close to the legendary knives. The knives he made combine the craftsmanship of Miao knives, samurai knives, Tang knives and other excellent knives. After the main body of the knife was made, it took another day to decorate the handle and scabbard. As a blacksmith, he had to do this kind of handwork part-time, which was still very difficult for him. He has done a little bit in carpentry, carving, etc., at least he can do it.

"Xiuchun Knife?" Ge Xiaohua finished the attire part of the knife, and compared the picture of the Xiuchun Knife simulated on the Internet, and found that it was very similar to the above, but there were differences.

The Xiuchun Knife was an exclusive weapon of the Jinyiwei in the Ming Dynasty. Its status and identity can be seen. It is a weapon representing a high-level profession. However, the Xiuchun Knife in the true sense has not been unearthed, but there are some historical records and drawings. Therefore, the production process Not to mention.

The knife that Ge Xiaohua worked so hard to forge is actually the Xiuchun Knife, which is beyond his estimation, but this Ge's Xiuchun Knife is still eligible to participate in the exhibition, and it is very representative.

(End of this chapter)

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like