The ironware I made shines

Chapter 311: Writing Wheel Eyes

Because it is a peripheral product of animation, the Kusanagi Sword created pays attention to the artistic beauty, so the sharpness should be weakened as much as possible. As a hand-made exhibit, it is often in contact with people. If you follow the design concept in the animation, the Kusanagi Sword The sharpness of the knife is extremely powerful, and it comes with a thunder cut, which can almost cut iron like mud.

Even if it is built according to a normal samurai sword, the sharpness is extremely powerful after being cut, and once this kind of actual combat samurai sword is held by a figure, accidents are prone to occur, because even if it is put in the sheath, it will not There is no guarantee that no one will take it indiscriminately. This is different from collected weapons. As a decoration, it is often placed in public areas. The sharpness must be compressed as much as possible. This is also different from ordinary sword collections.

Ge Xiaohua's current hand-made peripheral weapons are basically not sharpened, and safety is also considered. Moreover, it is obviously unrealistic to follow the shape of the animation peripherals and have the ability to fight in actual combat.

The Japanese samurai sword adopts the method of clamping steel and folding and forging. The basic method is naturally indispensable. The folding steel block is also the core, which can fully remove the impurities inside.

Although it is not sharpened, polishing is necessary to increase its beauty, and the time spent on sharpening is used for decoration, which is also a way for Ge Xiaohua to create peripheral weapons for animation.

Folding and forging took a long time. What Ge Xiaohua is now creating is a high-quality product, which is completely different from before. The speed is slower now, not because of a decline in technology, but because he has a new understanding of his own abilities. At that time, every detail was handled very well, and the improvement of concentration made Ge Xiaohua consume more energy naturally.

In the beginning, when Ge Xiaohua made ironware, the efficiency was high because many details were not in place. Simply relying on the additional light attributes of the system, the quality of Ge Xiaohua's builds was not bad, but it was nothing more than high-quality goods. Now Ge Xiaohua's swords are even Matte, the quality is also up to standard.

So the advantage of learning is that you can improve your own level, and the quality of the foundation created by Ge Xiaohua has become higher. After adding light, the overall quality will be improved by several levels.

It took three days to fold and forge it. It can be seen that although Ge Xiaohua created animation peripheral products, it is not ambiguous at all. Since it is a grass pheasant sword, it should be treated as an artifact.

In order to make the sword body look layered as a whole, Ge Xiaohua adopted three layers of clamped steel. When quenching, pay attention to the heat, so that the bending of the blade body is a little smaller, which is in line with the style characteristics of the grass pheasant sword in the anime. The sword body of this sword It is not long, so it is much more flexible to use, and it is shorter than ordinary katana swords.

"The concentration of the little hammer really makes me more involved when I forge iron." Ge Xiaohua switched to the hammer of concentration after swiping the hammer of fury. strengthen.

The folded sword embryo has been made, and the impurities in the sword embryo have been fully removed. Ge Xiaohua is still very handy with the three-layer laminated steel. The two hammers are used alternately. On the anvil with light, Ge Xiaohua's various attributes have improved a lot , making Ge Xiaohua increase the probability of creating a grass pheasant sword with light.

In addition, Ge Xiaohua's blacksmith level has reached a relatively high level of LV4, so he can know and perceive the state of the sword embryo, and grasp the feeling of every burst of light.

The sword embryo has just formed, and it has been forged into the state it should be. When it comes to the quenching stage, the three-layer steel clamping method can easily cause the sword body to bend violently. Therefore, it is necessary to control the temperature well, and the bending range is larger, which does not conform to the design concept of the grass pheasant sword. , the sword body itself is relatively short, the grass pheasant sword, the whole is in a straight edge state, only the blade has a curved design, which is formed by grinding.

"It's time!" Ge Xiaohua's ability to sense temperature became stronger and stronger. Knowing the best time for quenching, he quickly inserted the red-hot sword embryo from the furnace into the spring water, followed by a "嗞啦" and mist Lingering, the Grass Pheasant Sword was quenched successfully, and earth-shaking changes have taken place inside the blade, but it still looks black and needs to be polished.

Ge Xiaohua spent a lot of time polishing and polishing. Although he used a machine, he had to polish every inch of the sword embryo, which required a lot of patience. After polishing, the sword embryo was shining brightly, like an artifact.

Then Ge Xiaohua made the hilt, scabbard, and the string tied around the waist, etc. A series of preparations were ready, and all the costumes and props purchased on the Internet arrived. Ge Xiaohua took advantage of the time to give Sasuke a Sasuke, who has relatively thick hair, spent a lot of time just implanting these hairs, but Ge Xiaohua is very used to this kind of work, and the efficiency is still very high.

Ge Xiaohua has taken care of every detail. As a full-time prop master of Marvel in the United States, and with the existence of industrial-grade 3D printers, Ge Xiaohua does not go to the United States in vain every time, and has also conducted learning exchanges with many prop masters.

For the trick of implanting hair, Ge Xiaohua also learned from the American modeling master. In this aspect, Marvel's prop masters are not capable.

Ge Xiaohua finished everything. The Kusanagi sword was tied to the back of Sasuke's waist. Sasuke was standing with a sword drawn. The Kusanagi sword was looming, shining with infinite power. He can see through everything, even though Sharingan is 3D printed, but with the Kusanagi sword, Sasuke seems to come alive.

It took a week for Ge Xiaohua to build this Grass Pheasant Sword, and it burst into blue light. As a general decoration, the Grass Pheasant Sword has no edge, and the probability of its sharpness bursting out will be much smaller. In the early stage, Ge Xiaohua had some Even if agricultural tools such as sickles are not sharpened, they will have sharpness, which is the sharpness attribute added by light.

The sword is different, without a sharpened edge, the possibility of bursting out sharp will be smaller, of course, it may also burst out, but the value will not be too high.

The most important thing is the surrounding animation figures, this kind of accessory sword art, it is more practical to add attributes such as sharpness and exquisiteness.

Blu-ray Grass Pheasant Sword: Exquisite and Abnormal +10, Vivid +12
The attributes that Ge Xiaohua obtained are all related to art, which is also in line with Ge Xiaohua's expectations. The values ​​​​have also exceeded 10, and the attributes above 10 have extremely strong effects. This is why Sasuke wears the grass pheasant sword. The whole thing seems to be alive, and the Sharingan is like a kaleidoscope, which can give people the illusion that Sasuke is in a fighting state.

Although Erzhuzi is aloof and arrogant, but his strength is obvious to all. As a genius, he always takes his brother as his goal, and Sasuke, who is controlled by his brother, also does everything for his strength, so he can dominate the world of Naruto.

So what the Grass Pheasant Sword brings to Sasuke's work is an improvement in the overall exquisiteness, and it also improves Sasuke's demeanor, posture, and charm a lot.

In the beginning, Zuo’s office was lifeless, as if it had no soul, it was a dead thing, no matter how powerful the 3D printer was, it only printed and restored the Sasuke designed by Ge Xiaohua.

However, with the addition of vivid attributes, the overall style of the assistant's figure has risen several levels. This is the core element of the ironware made by Ge Xiaohua to attach to the figure model.

Without the addition of bright iron, the figures are just a bunch of resin models, which are not very valuable, and they don’t have much artistic attainment. This is why Ge Xiaohua’s printed Uchiha Itachi always feels that there are some shortcomings.

Just those pair of Sharingan eyes are much better than Itachi's, through the addition of Kusanagi Sword's vivid attributes, it has aura. Ge Xiaohua stared at Sasuke's Sharingan eyes, as if he had been hit by Izanami. How come there are pupils?It can be seen that after the ironware made by Ge Xiaohua is equipped with light, the effect sometimes even surprises Ge Xiaohua.

"Want to try the power of Sharingan? Then come and buy Sasuke's 10th anniversary commemorative figure, "Naruto" genuine authorization, Ge Xiaohua's honorary production!" Ge Xiaohua even thought out the lines of advertising sales, this figure will indeed Fascinating, even Sharingan has a certain attraction, and the overall effect is extremely good. This is something Ge Xiaohua never thought of, and there are still unexpected gains. I don’t know if the son of a car tycoon can afford the price. Ge Xiaohua is now The worry is this, after all, this assistant model is still very successful.

(End of this chapter)