Super industrial overlord

Chapter 20 Trial Production
Zhang Yi came to the factory early in the morning the next day. Since there is already a CNC machine tool, and Xiaohua has already carried out some tentative operations on the CNC machine tool Zhang Yi bought yesterday, so for this The performance of the machine tool already roughly knows how to operate it.

Although the CNC machine tools of human civilization are different from the CNC machine tools of Xiaohua and the dwarves, the basic principles are still somewhat similar. Coupled with the detailed instructions from the staff who came to install the machine yesterday, Xiaohua checked the manual again , Now Xiaohua has basically mastered the operation method, and yesterday, he has processed a lot of parts.

Today, after Zhang Yi and Xiaohua arrived, they first put the parts into the CNC machine tool, and then took out the blueprint of the aerodynamic bicycle to look at it. Components, air motors are trial-manufactured.

After all, compared to other parts of an aerodynamic bicycle, the air motor is definitely the core of the core. As long as the air motor is manufactured, the next parts will not be a problem.

Perhaps the air motor of this aerodynamic bicycle is very difficult for others. After all, this motor has very strict requirements on precision, and it cannot be processed even with high-performance CNC machine tools.

But Xiaohua's name of "Xueba" is not called for nothing. Although Xiaohua is only a junior mechanical engineering student, and now she has only achieved some achievements in mechanical processing. machinery and equipment, there are still difficulties.

After all, designing a relatively complex mechanical device requires not only mechanical knowledge, but also other knowledge. For example, designing and manufacturing a motor requires knowledge of the power industry and so on.

However, Xiaohua's machining ability is really nothing to say. According to Zhang Yi's observations during this period, he is absolutely in admiration of Xiaohua's processing ability. In the case of drawings, it is absolutely possible to process the accessories of this air motor, and the processing The speed is not slow.

In just one day, Xiaohua processed nearly [-] air motors for aerodynamic bicycles. This is on the premise that she has to take care of CNC machine tools at the same time.

Zhang Yi and the others spent a total of two days manufacturing fifty aerodynamic bicycle accessories in the case of drawings, and then spent another day assembling all these bicycles.

After all the bicycles were assembled, Zhang Yi picked out one at random, and then rode it out. After all, Zhang Yi himself didn’t know much about the performance of this bicycle, and the drawings were just drawings after all. After the actual production, there will definitely be a gap with the data on the drawing, but Zhang Yi is confident that even if there is a gap between this aerodynamic bicycle and the data on the drawing, it will definitely not be too big.

After Zhang Yi tried riding it, he was very satisfied with his aerodynamic bicycle, even better than the data on the blueprint. Zhang Yi knew that this was definitely due to Xiaohua.

This aerodynamic bicycle is not like the aerodynamic bicycles in the news. It has a large air storage tank. The aerodynamic bicycle produced by Zhang Yi directly stores compressed air in the bicycle frame.

And because the frame of this car is specially strengthened when manufacturing the frame, the air pressure can be increased to more than 20, but for safety reasons, the maximum air pressure can only be increased to 18.

Of course, because ordinary air scales, especially those in ordinary car repair shops, generally speaking, the maximum air pressure can only reach 4-8, so there are special valves on this bicycle, which can be turned on by ordinary air scales. The air pressure inside the bike was raised to 18.

In addition, the biggest difference between this aerodynamic bicycle and ordinary bicycles is that there is no transmission shaft or chain on this aerodynamic bicycle. Although there are pedals, the purpose of the pedals can also drive the rear wheels, but only The chain and drive shaft were changed to use the pedals to generate compressed air, then use the compressed air to drive the air motor, and then the air motor drives the rear wheel.

The speed of this aerodynamic bicycle produced by Zhang Yi can reach about 50 kilometers per hour at the fastest, but the cruising range at this speed is only about 50 kilometers. If the speed is reduced to 30 kilometers per hour, then The aerodynamic bike will have a cruising range of 70 kilometers, which is enough for the average commuter.

At the same time, even when the air tank is empty, riding is very easy, even easier than ordinary bicycles, and the speed can reach 25 kilometers per hour.

Moreover, the appearance of the car is also very fashionable and beautiful, at least it is much better looking than most electric cars, coupled with environmental protection, novelty, convenience, etc., Zhang Yi can be sure that this aerodynamic bicycle will definitely be accepted by the market Yes, after all, the price of an ordinary electric car is also 3-4 thousand, and the price of a better electric car is even higher.

Many of them cost tens of thousands of yuan. Compared with these, the price of the aerodynamic bicycle produced by Zhang Yi is not low. After all, there are no aerodynamic bicycles on the market, or there are no practical aerodynamic bicycles.

However, the cost of this car is still a bit high. Due to the use of a large amount of titanium alloy materials, the cost of the entire car has reached 1500 yuan. The cost of an air-powered bicycle will reach about 2000 yuan, which is still a bit high compared to most electric vehicles.

But this is because they are only trial production now. If large-scale production starts in the future, the cost of the whole car should be reduced to less than 1700 yuan.

According to calculations, the cost of around 1700 is already the limit. If mechanical structure tires and soft memory metals are to be used in the future, the cost will be even higher, at least above 2500.

Therefore, Zhang Yi’s price for this bicycle is also very high. He tentatively set the ex-factory price at 4000 yuan each, and the retail price is tentatively set at 6000. If mechanical structure tires are used in the future, the ex-factory price will be at least 6000. It will work, of course, this is only the ex-factory price, and the retail price must be at least 8000 or more.

However, after Zhang Yi tried riding this bicycle, he began to worry about how to sell this bicycle. You must know that he does not have any sales channels now. Of course, he can also sell it online like others.

However, Zhang Yi knew that since his Qicaishi Machinery Factory is not well-known at all, and he has no funds to advertise this bicycle and expand the reputation of this aerodynamic bicycle, it must not sell much at the beginning, even in a month. It is possible that none of them will be sold.

(End of this chapter)