The villain also has spring 2

Danielle, the leader of the "SA3 Sisters" and the chief casting assistant, still insisted on stability: "Even if we can't get more invitations to the premiere, we must find a way to send as many people as possible, just in case. one."

"There is a way." Ms. Katie, the assistant casting director, has already thought of it: "a supporting performance at the premiere reception and dinner."

Generally speaking, movie premieres are usually held in theaters or specific event venues, and invited guests include film producers, actors, fans, and media. In addition to the film screening, there will also be a reception and appreciation dinner. So the premiere is also called the premiere.

"Are there any suitable performers in the 'training class' we set up on the set?" German actress Anneliese Akerman then asked. She is one of the 10 guests on set who will definitely be invited to attend the premiere.

“Considering the obsession of the Third Reich’s top brass with ‘female movie stars’, it’s best not to choose actresses as supporting performers.” Ms. Katie, the deputy casting director, apparently also had full consideration: “They’d better be salon girls. .”

"Okay." German actress Anneliese Akerman immediately woke up. Although the salon girls have an appearance that is no less beautiful than that of female celebrities, due to the huge difference in status, they will never become the mattress of the Nazi high-ranking officials. After all, in addition to the Aryan "blood theory", "birth theory" was also an unshakable Nazi system of the Third Reich.

This is also an important reason why Olga Chekhov became a hot German star. Because her aunt is the wife of the famous Russian writer Anton Pavlovich Chekhov, who is known as one of the "three major short story writers in the world" together with the French writer Maupassant and the American writer O. Henry. You know, the original head of state was also very good at art.

So at least on the surface, Nazi senior officials would never have an "affair" with salon girls.

Soon, Mrs. Helga Holtz, the director of the "Set Assistance Training Course" and Ilsa, the deputy director, drew up a list of performances to support the entertainment:
"Colonel Elsa Ackermann" and her female subordinates in "Nazi Orgy 2: Spy Whore" are different from the Soviet female military doctor Natalie Baskova of SA3 Salon Girl Team B. Liselotte Richter, who is in the same degree, and Gudrun, a female singer who is in the same degree as Marcel of the SA3 Salon Girls Team B;
"Lieutenant Linda Harman" and "Lieutenant Grace Freeman" of the WAC Army Women's Team in "The Seventh Love Camp";
And the SOE women's task force led by Captain Louise Desfontaine in "Supergirl": Jeanne Forsier, Gayle Lemenech, Susie Desprez, Maria Luza Trust.

This operation is named "Warm up". The person in charge of the warm-up operation is Louise Desfontaine, captain of the SOE Women's Task Force.

"By the way, Heidi, has the B-VIII nuclear power locomotive modification been completed?" Mrs. Katie, the assistant casting director, looked at the female inventor Hedy Lamarr.

"The design plan has been completed, and the only limitation for us is obviously the material." As the chief engineer of the "Distinguished Lady" construction plan, female inventor Hedy Lamarr is very familiar with the construction progress: "A material that can withstand high temperatures, corrosion and high stress High-performance alloy." "So?" Irene, the set safety director and female guerrilla, asked with a smile.

"So, 'good steel is used on the blade'. The best alloys of the Third Reich were used to make Tiger heavy tanks. There is no way to buy them on the market." The answer of female inventor Hedy Lamarr is also reasonable. among.

The 56-ton Tiger tank uses the most advanced nickel alloy steel armor, which was also the best-quality armor steel in Germany during World War II. Tiger armor is produced using a cold-rolled forging process rather than casting. Compared with cast steel, cold-rolled forged steel has higher strength properties, and its density is increased by about 6%. Although the manufacturer of the Tiger tank suggested to the army in 1944 that in order to save man-hours and speed up tank production, it must change to a cast steel process. After careful consideration, the Army rejected this suggestion on the grounds that the quality of the armor must be ensured.

而同时期，于1943年12月15日投产的前苏联T-34/85坦克用弧光穿甲弹在1000米距离可以击穿120毫米装甲，理论上可以在1000米距离上打穿正面装甲110毫米的虎Ⅰ坦克。可实验证明T-34/85坦克不能在1000米距离上击穿虎Ⅰ坦克，苏联人在实验中还发现，德国的装甲在同等厚度时的防护力优于苏联。德国的坦克手册里记载，“虎王（虎II）坦克”在1000米距离上平均垂直穿甲厚度是175毫米，然而，苏联人用“虎王”攻击自己的坦克，发现在1000米距离上垂直穿甲可达203毫米！苏联T-34/85可以打穿120毫米的“苏联装甲”，而换成“德国虎式装甲”，T-34/85坦克根本打不出120毫米的厚度，最多只能击穿100毫米。所以在1000米距离上，T-34/85打不穿虎Ⅰ。由此判定，T-34/85坦克要在700米距离上才能击毁虎Ⅰ。

The reason why the Soviet armor was not worthy of its name was that the sudden outbreak of the war and the rapid advance of the German army caused the Soviet Union to lose resource areas and industrial centers in Ukraine, including manganese mines, and the supply of finely pressed steel was also interrupted for a time. Soviet tanks using nickel-chromium-manganese alloy steel have a significantly reduced protection quality. Coupled with the tight production schedule, which resulted in a large number of streamlined processes, the casting technology of armor steel was defective, and the remaining bubbles caused the armor to become brittle. Similarly, nickel is a scarce resource in Germany's strategic reserves. In the late World War II, German tanks did not have enough rare metals, so the tank armor used the carburizing process, which is now commonly known as the surface hardening process. The surface hardening thickness of the steel plate can reach 20% to 30%. If the same 20 mm steel plate is made of carburized steel, the protective performance can be improved to about 26 mm. One drawback of using surface carburizing hardened armor is that while the armor hardness is strengthened, its armor toughness and ductility are greatly reduced. In layman's terms, it becomes brittle. . Especially in late 44, many German tanks whose armor craftsmanship had declined were not penetrated by Allied anti-tank firepower but had large areas of armor cracked.

During World War II, only Germany used a large amount of carburized steel as steel for tank protection. It would take 300000 man-hours to build a Tiger tank, which was almost double the man-hours required to build a Panther tank. The average cost of a Tiger tank is 250000 Reichsmarks, compared to a Panzer III (PzKpfw III) costing 96200 Reichsmarks, a Panzer IV (PzKpfw IV) costing 103500 Reichsmarks, and a Panther The cost of the Type V tank (PzKpfw V) is 117000 Reichsmarks. The Tiger tank is truly the aristocratic "Mercedes" in the tank family. The production of Tiger tanks consumes a large amount of nickel that is in short supply in Germany, and Germany's strategic reserves at the end of 43 only had 6000 tons of nickel and 21000 tons of chromium. With Finland's withdrawal from the war, Germany lost its only nickel producer, the nickel plant in Kolosjoki. The situation dictated that Nazi Germany, which was unwilling to reduce its industrial technology content, could only stop the production of Tiger tanks.

Danielle, the leader of the "SA3 Sisters" and chief casting assistant, War Girl, immediately asked: "Heidi, which steel factory does the nickel alloy steel armor come from?"

"Essenbeck Steel Works." Female inventor Hedy Lamarr blurted out.

"Since it is not the Krupp Steel Plant (in the real world), then this Essenbeck Steel Plant must come from the time and space of the plot." The leader of the "SA3 Sisters" and the chief casting assistant War Girl, who had done enough homework when they arrived. Danielle had already thought: "Katie, go check it out."

"Okay, Danielle." Ms. Katie, the assistant casting director, went to do it immediately.