Start a blacksmith shop

Chapter 153 Remodeling
After staying in Hongdu for three days, I wrote down all the parts that needed to be replaced,
And his work here has come to an end, and he returned home with the catalog of parts to be manufactured and the flight data that Cui Tianzhi gave him.

When he came back this time, he had things to do again, and he was no longer the same as Xianyu before.

On the second day after returning home, he made a plan for himself, the first thing was to manufacture all the replacement parts for Suzaku 8,
When all these things are done, he will also start to think about what he should bring to the Xiangshan County Airshow.

For making parts, he can already be said to be handy. There are still a lot of materials that have been smelted before, so there is no need to start with materials.

This time, the single crystal metal blades are the ones that need to be replaced the most and are the most worn out.
This is the largest part he will make, followed by air bearings.

It took seven days to buffer all the manufactured parts, and after packing them, he called Cui Tianzhi, and the military card for the parts arrived within a short time.

So far, all the parts to be used on Suzaku 8 have been sent to Hongdu, and he doesn't care about the way to get there.

During the week of making the parts, he was also thinking about what to get for the airshow.

After thinking about it, he didn't have any ideas, and then he decided not to,
It’s no big deal if there are fewer products, so what if there are fewer products?

Anyway, this time is to increase experience, I didn't expect to achieve much.

Thinking of this, he adjusted his mentality.

After he adjusted his mentality, his mood became smoother, and his heart was no longer impetuous.

The products he brought to the exhibition are definitely settled, that is, two original Suzaku 8 and Suzaku 3.

Of course, this one cannot let the one in Cui Tianzhi's hand go, and the other one is still unknown!
Then after he finishes Suzaku 8, he will be very busy. He will make at least four planes, two of each kind.
One of them will be used as a model and placed on the booth,

This can be replaced by a real model, that is, an airplane shell, as long as it doesn't look fake from the outside!

The other one is a real machine, which is taken out to show off.

All functions must be complete, and maybe this plane will be used for performances at that time.

Things still need to be done one by one. Now let’s finish the overhaul and reassembly of the Suzaku 8 in Hongdu Factory, one by one.

After thinking about his future plan, he only stayed at home for seven days this time, and he returned to Hongdu again.
In less than two weeks, he ran back and forth between Hongdu and home twice.

After returning to Hongdu Factory, he was engaged in intensive overhaul. The work here was finished earlier, so he could go back to do his own work.

After his careful assembly and superb skills, Suzaku 8 was reassembled by him, restoring its original majesty.

And this time he did not simply overhaul it, but removed the pylons on the previous wing,

And the dismantled weapon hanger is placed on the receiver with a stronger structure and will not move, and on the belly position,
Since Chief Cui wants to fight, it's better to keep these hangers.

After assembling Suzaku 8, he immediately returned home from Hongdu, and then he devoted himself to the busy manufacturing work.

During the day, I work on parts in the factory, and in the dead of night, I get into the virtual laboratory by myself and start my own research.

What is he going to study at this time?Of course, it is what Cui Tianzhi promised before, everything starts from war and redesigns Suzaku 8.

Let the Suzaku 8 truly become a fighter capable of combat, with beyond-the-horizon and melee dogfighting.

The first thing to solve is to install the external weapon rack. As a stealth fighter, the first thing to ensure is its appearance.

Then it is necessary to redesign the fuselage of this aircraft. Since the previous fuselage did not consider built-in missiles and cannons, there was no space reserved for these things.

His solution to this problem is to make the fuselage as wide as possible and make a magazine on the fuselage while ensuring the stealth shape.

And reserve space for the cannon, but if you want to change the fuselage, you will face a problem,
That is, the aerodynamic layout will inevitably change, and the lift coefficient will definitely change if the layout changes.

Designing the shape of the fuselage and the aerodynamic layout in this way is undoubtedly creating a new aircraft.

But these did not stump him, on the contrary, he definitely became more challenging.

In this way, the shape of the new Suzaku fuselage was designed by him, referring to the network diagram of the Buddha 22 seen on the Internet for the layout.

The magazine is designed to the belly and the side of the air intake of the fuselage, which also makes the fuselage bloated a few times,
Compared with the previous Suzaku 8, the current aircraft is a fat man in appearance.

The shape of the nose has also been fattened by him. Two 20mm Gatling cannons are installed on both sides of the nose. One magazine can be fully loaded with 360 rounds of ammunition, with a total of 720 rounds on both sides.

Not to mention the low amount of ammunition, because if a fighter plane reaches the point where it can use its machine guns, it means that it is time for a decisive battle of life and death.
With the maneuverability of his plane, it is possible that a few cannon shots can knock down the enemy, and 720 rounds of ammunition is really a lot.

For this fuselage that has gained weight many times, he specially embodied the supersonic wind tunnel that Hong Du came into contact with in the virtual laboratory.

When blowing the air holes for the fuselage, his eyes once again made a great contribution,

Where it does not conform to aerodynamics, his eyes can immediately give data,
He also made small-scale improvements to the fuselage based on the data provided by his eyes, and then went into the wind tunnel to blow after the improvement, and then changed it after blowing.

After such a cycle, there is finally no room for modification on the fuselage of this aircraft. Of course, all these improvements are carried out while maintaining the stealth effect.

After finishing the fuselage, the performance of the aircraft he redesigned also changed,
The weight is a bit heavier, but there are many wind tunnels and modifications. The aerodynamic layout is excellent, and the performance has not changed much compared to the original.

On the contrary, due to the excellent aerodynamic layout and the substantial increase in lift, the take-off weight has increased instead.

These are the changes in appearance. The biggest change is the generator installed on the engine.

This is an upgrade prepared for the radar on the plane. The previous generator was a very small power generator, so I didn't pay attention to it.

But now it's different. The plane has an active phased array radar that is a big consumer of electricity and claims to be able to cook a chicken one kilometer away.

The power generation capacity of this thing is small but it cannot be used. It turns out that the power on the plane is just enough.
This time, in order to allow the aircraft to use the radar with confidence, he specifically conducted research on the generator.

The generator attached to the engine is driven by the high-temperature gas inside, and the generator attached to the top of the fuselage is driven by the wind generated during the flight of the aircraft.

He placed five generators on the entire plane, two of which are thermal power generators attached to the engines,

The other three are wind turbines, which are installed on the fuselage. Of course, these generators will not have much impact on the aerodynamic layout.

In short, he is very careful about the modification of the aircraft in the virtual laboratory this time. Many things are considered from the perspective of combat, and he has also done countless deduction to prove that the designs he made are practical. .

A month passed slowly. During this month, he pulled out all the parts of the two real planes. Of course, he also got out the shell of an aircraft.

And during this month, he really spent endless hours in the virtual experiment,

The current flow of time is very high. During these times, he has achieved the ultimate in details for airplanes, not fighter jets.

These things are all made by him through little experiments, and it can be said that it is the most thoughtful product he has made so far.

He has already designed the fighter in the virtual laboratory, so of course he has to keep up with it in reality,
Still using the same materials, in his workshop, he started picking up parts for the new aircraft by himself.

He had already made a plan, as long as he finished all the parts and spare parts of the new plane, he would immediately take these parts to Hongdu.

As for why go to Hongdu instead of assembling at home, it is also very simple, because the conditions at home do not allow it.

The summer town factory area is about to be completed, and the space over there is big enough, but there is a problem, that is, where to take off?
It cannot take off, and the eight-meter wingspan is a problem in how to transport it.

So he relied on Hongdu factory, and Hongdu factory treated him very well, and he was not annoyed at all because he wanted to occupy resources.

On the contrary, I am looking forward to his arrival, because being able to see the birth of an aircraft with my own eyes also inspires their daily design work.

On this day, he finally finished all the parts, and then put the parts away in different categories. After transporting them to the military card, he also got on the military card and took a ride to Hongdu.

It’s still the same workshop as before, and it’s still the same technicians.
On the day he arrived in Hongdu, he began to direct these technicians, unpacking all the parts boxes of Suzaku 8,

And in the parts box was still the assembly work instruction book that he made up himself, so these people were sent aside by him to assemble the old Suzaku 8.

And he started to unpack all the boxes belonging to the new model, unpacking the unique engine of the new model,
The engine whose appearance changed obviously surprised Yan Hang who was watching.

Finding that the engine had changed, Yan Hang immediately walked to the side of the engine and carefully looked at the changed part of the engine.

After researching, he found that it was only the generator that had changed.

At this time, Yan Hang also thought of the situation that the power on the plane was not enough.

"Zhenhua, the boxes you're unpacking now must be different, otherwise you wouldn't be packing these things yourself!"

(End of this chapter)