Start with the aviation industry

Chapter 69
It's time to get off work.

The machine tools at the production site stopped one after another, and the workers began to clean up. Some even began to wash their hands with soap by the sink.

Of course, this imported CNC five-axis machine has not stopped. It is still tirelessly processing the whole turbine disk. Through the safety glass door of the machine tool, it can be seen that the rough machining of the blade has been completed, and it has entered the stage of fine milling. .

"Master, don't worry, we are in charge of everything." Song Liu said.

Wang Qiang also said, "We're fine."

Lin Feng nodded reassuringly, and explained a few words, such as after the processing of this part, there is no need to rush to process the second part, and we will talk about it tomorrow morning.

The processing of this part is estimated to be over 11:30 in the evening, and the two of them can get off work after a short rest.

After a few instructions, Lin Feng also got off work, and waved, "Xiaoxiao, let's go."

Hu Xiaoxiao happily followed, this is going to a restaurant with the master.As for Wang Qiang and the others, since they have to work night shifts, they will not be able to speak so well. Let's talk about it next time.

A group of four people left the workshop with two bicycles.

"Master, where should we go for dinner?" Ma Xiaoli asked.

Before Lin Feng answered, Yang Wenjie hurriedly said, "Brother Lin, how about we go to the city, I know there is a good barbecue restaurant."

It can be seen that this guy wants to eat barbecue.

I want to eat shit.

Lin Feng shook his head and denied, "The city is too far away, and we still have parts to process on the machine tool."

Yes!

It's a bit far from the city, and it takes three to four 10 minutes to go there by bus, and it takes even more time to wait for the bus, which is very inconvenient.

Hu Xiaoxiao said, "We have to go to work tomorrow, so we won't go to the city. I know that there is a restaurant nearby that cooks delicious camellia duck. How about we go eat duck?"

Tea duck is good!
That fragrance makes people have an appetite all at once.

Lin Feng also knew that restaurant, and he had been there once before, so he immediately agreed, "Let's go, let's eat tea oil duck."

After finishing speaking, she set off on her bicycle, and Hu Xiaoxiao jumped up skillfully and sat on the back seat of the [-]-bar.

Yang Wenjie hurriedly followed by riding a bicycle, and Ma Xiaoli was sitting in the back seat of him.

The next day, early in the morning.

Lin Feng arrived at the production site, went directly to the imported CNC five-axis machine, and quickly nodded in satisfaction.

The machine tool was cleaned up. Obviously, Wang Qiang and Song Liu specially cleaned the machine tool before leaving get off work.

The processed whole turbine disc is placed on the work table, it is very beautiful without any burrs.

It is estimated that even if there is a little bit of burr after processing, they have polished it off with a whetstone.

"Master, this part is so beautiful, it's like a work of art."

It is indeed very delicate.

Lin Feng picked it up and took a look. It was basically as he expected, especially the milling finish of the leaf surface was very good, estimated to be around 1.6.

This is very difficult. It is generally difficult to achieve such a high finish in milling. This is mainly because Lin Feng uses small feed and high-speed milling during fine milling.

After looking at this part, Lin Feng looked at Wang Qiang's shift records, and then ordered Hu Xiaoxiao and Ma Xiaoli.

"You guys process the second part."

"Master, then you have to guide us by the side. We are a little nervous about such a complicated part."

"It's okay, I'll watch from the side." Lin Feng replied.

Hu Xiaoxiao and Ma Xiaoli got busy, making preparations before processing. After some preparations, they started processing the second part at about 09:30 in the morning.

Not long after the second part was processed, Lin Feng's eyes lit up slightly, and he saw Yan Bing, the workshop director, walking towards this side accompanied by Wang Tianfang and Zeng Zhihong.

"Xiao Lin, how is the processing of the parts?" Yan Bing asked loudly.

Lin Feng said, "It was finished at 11:30 last night, and the quality is completely acceptable."

Zeng Zhihong walked over quickly, and was the first to pick up the part on the table, looked at it again and again, and couldn't put it down.

As if this is a treasure.

After looking at it, he praised, "It's far better than I imagined, and it's beautifully processed."

After finishing speaking, he put down the parts, and held Wang Tianfang's hand tightly with a little excitement, "Old man, you have helped me a lot. To be honest, I have always been worried that it would be difficult to process. I didn't expect that not only it was processed, but also The processing quality is so good."

Not only the quality is first-class, but also the efficiency is very high.

They originally worried that it would take tens of hours to mill the blade of this part, but it only took thirteen and a half hours.

Wuyou felt relieved, the task was completed, and he smiled heartily, "Director Zeng, if you want to thank us, Xiao Lin, the parts are processed by others."

"Yep."

Zeng Zhihong thanked again, but this time, the object of thanks was Lin Feng.

Facing the thanks from the deputy director, Lin Feng knew how to measure, and did not take it for granted, but was very polite and humble.

This attitude made Zeng Zhihong's impression of him even deeper, and he was also very satisfied. Zeng Zhihong even thought in his heart, Xiaolin is good, he is indeed very good.

Lin Feng just went to the general management department because there was one of his packages.

Seeing that it was mailed by Chen Yan from Jiangnan Publishing House, Lin Feng guessed that this might be a basic sample book, and the first and second volumes of "Those Things in the Ming Dynasty" had already been published.

Each copy is priced at 1.98 yuan, and a total of 10 copies will be printed.

For every author, there is nothing more gratifying than having his book published.

As soon as he got the package, Lin Feng was very happy, he happily returned to his office, and opened the package regardless of 21 or [-].

Sure enough, there were several sample books inside, three in each volume, six in total, the cover was exquisite, and the printing quality was found to be very good when I opened it.

The quality of this book is good!
Although it is not a hardcover book, it can definitely match the quality of a hardcover book, um, not bad, not bad.

Lin Feng looked through it in a good mood, and the more he read it, the more satisfied he was, especially the scientific layout and the slightly larger font, which made people feel comfortable to read.

"Boom, boom, boom!"

There was a knock on the door, Lin Feng put down the book in his hand, and said loudly, "Come in."

It was Yang Wenjie who opened the door and came in. He was holding an introduction to CNC programming in his hand. Recently, he started to learn CNC programming. When he encountered some problems that he didn't understand, he would come to ask Lin Feng for advice.

"Brother Lin!"

Yang Wenjie is very polite.

Lin Feng's eyes fell on the book Introduction to CNC Programming and he understood what was going on, and asked, "There are some things I don't understand, so I have to ask me."

"Yes, yes, there are several things I don't understand, brother Lin, please teach me."

After he finished speaking, he took some of the introductory books on CNC programming and walked over. Soon, he found the basic "Things of the Ming Dynasty" on the table, and his eyes were quickly attracted.

(End of this chapter)