Start with the aviation industry

Chapter 55

The test was successful!
Everyone's stress is greatly reduced!
The three combustion chamber casings with faults also began to enter the repair process, completely following the technical plan written by Lin Feng, and the process steps and process parameters were completely followed.

Lin Feng was busy until one o'clock in the middle of the night before returning to the dormitory to rest. Although he was tired, he was excited and had a strong sense of accomplishment.

The next day, Lin Feng went to work about an hour and a half later than usual. In fact, Mr. Wang specially approved that Lin Feng could rest this morning.

I slept until nearly nine o'clock in the morning, full of energy, young is good, and recovered quickly, it is completely impossible to see that I didn't go to bed until almost two o'clock last night.

I went out to the cafeteria to have a simple breakfast, and then rode my own [-] poles to the door of the workshop.

Why don't I take a break this morning? On the one hand, it's boring to stay in the dormitory by myself, and on the other hand, I can come to the workshop to type some words on the computer.

"Those Things in the Ming Dynasty" has written nearly 30 words. Excluding the 20 words sent out, there are still nearly [-] words left.

Lin Feng was going to seize the time to finish writing this book as soon as possible, so he insisted on coding almost every day, ranging from three to five thousand words to more than [-] words.

In the process technology room, except for a few process technicians who are estimated to have gone to the manufacturing site, most of them are working hard, some are drawing process drawings, some are compiling process regulations, and some are perfecting process regulations.

When Lin Feng came in, some people looked up.

Generally speaking, Lin Feng is rarely late, 360 days a year, he basically goes to work on time and leaves work on time.

Yang Wenjie was slightly curious that Brother Lin was late today, and he was late for a full hour and a half.

However, it was just such a thought that popped up in my heart, and I didn't take it too seriously.

When Liu Changrong, the director of the craft room, saw Lin Feng walking in, not only did he not feel dissatisfied or blamed, but instead smiled, "Xiao Lin, I'm here for work."

Obviously, he knew what happened last night, maybe Jiang Haitao told him specifically.

Lin Feng said, "Director Liu, I'm coming to work."

"Actually, you can rest this morning, Mr. Wang personally approved it." Liu Changrong reminded.

At the beginning, no one might pay much attention to it, but when they heard the words "President Wang", some people still pricked up their ears. On the surface, they seemed to be still working hard, but in fact, they concentrated their energy and tried their best to listen to Liu Changrong and Mr. Liu. Lin Feng's conversation.

Lin Feng said, "I slept for more than an hour more than usual, which is enough. The two CNC machine tools are processing parts, but I am a little worried when I take a look."

This is true.

Although the four of Wang Qiang and the others had no major problems in operation, they were not very proficient. They belonged to the kind of beginners. If they encountered any problems, they still didn't know how to deal with them.

It takes time to grow up slowly. Maybe after a year or so, they will become proficient in operation, have more experience in CNC machining, and handle some simple problems by themselves.

Liu Changrong praised a few words, but he didn't continue. He was also very busy, and a lot of technical information needed to be proofread.

As for Lin Feng, he sat down at his seat, showed his face in the technology room, and then went to the production site to see the processing status of the two CNC machine tools.

As soon as Lin Feng left, the crafts and technology room gradually became restless. No matter what time it was, people were always curious, such as certain craftsmen in the crafts and technology room.

"What did Lin Feng do last night, Mr. Wang actually specially approved him to rest this morning."

"I remember Lin Gong went to the factory office for a meeting yesterday afternoon, and he never came back."

"There are three turboprop six engines returning to the factory for troubleshooting due to oil consumption. This is a major event for the whole factory. Is it related to this matter?"

"Well, very likely."

Liu Changrong, who was carefully proofreading the technical documents, saw that the technology room was noisy, and several young craftsmen were discussing, so he couldn't help standing up.

He was not angry, nor did he criticize these craftsmen, but said loudly, "Everyone, calm down and work hard. Lin Feng proposed a repair technical plan, and the factory not only adopted it, but also used this technical plan for the three A faulty combustion chamber was repaired, and it was in the sheet metal workshop last night until more than one o'clock in the middle of the night."

what!
Lin Feng is so powerful that he actually proposed a repair plan, and successfully repaired the three faulty combustion chamber casings according to this plan.

This is too bullshit!
A group of craft technicians, when they heard this situation, many of them were dumbfounded, and it took a long time to come back to their senses.

What about Lin Feng?

I went to the production first to see the processing of the two CNC machine tools last time, then went back to my office, sat in front of that computer and continued to write "Those Things in the Ming Dynasty".

In the next two days, the three turboprop six engines were successfully repaired, the final assembly of the engines was completed, and two installations and two tests were completed. The three engines fully reached the factory standard.

The so-called "two installations and two tests" means that the engine must be assembled twice and tested twice before leaving the factory.That is to say, after the engine assembly is completed, the engine is tested for the first time, and then returned to the assembly workshop for disassembly and inspection. If there is no problem, it will be assembled again and tested again. If the second test is qualified, it can leave the factory.

Test workshop.

The three engines have completed "two installations and two tests" and are ready to be loaded. Not far away, a large army green truck is ready.

Each engine has also been put into the packing box and neatly placed in the open space of the test workshop.

Several workers were busy hoisting the engines one by one onto the army green truck.

All three engines were loaded into the car, tied up firmly, covered with a tarpaulin, and ready to go.

Three soldiers got into the car, the truck honked, and then slowly left.Wang Tianfang and others watched the car leave, and they all breathed a sigh of relief, completely relaxed now.

Within five days, the three engines were successfully returned to the factory for troubleshooting, fully meeting the time requirements put forward by the military.

As for the fourth engine with the same fault, which has been returned to the factory, troubleshooting will also be carried out, but with this set of repair technical solutions in hand, the troubleshooting of this engine is not a problem.

After watching the car go away, Wang Tianfang looked away, and said to the director of the design department and the director of the engineering technology department next to him, "The repair plan proposed by Xiaolin has proved to be very perfect. You two departments take the lead and write it into the turboprop. Repair manual for six engines."

The two were slightly surprised, hesitated for a moment before nodding.

Why are you surprised?

Because the repair manual of the turboprop six engine was provided by Lao Maozi, from the 70s to the present, there have been few changes in more than ten years.

Only a few additions have been made in the past ten years, and it is basically the original version. Now that Lin Feng's repair technology plan is to be added, it is no wonder that the two of them were slightly surprised.

In fact, there is one more thing that Wang Tianfang didn't tell the two of them, that is, Lin Feng should be rewarded for his outstanding performance in this return to the factory.

Wang Tianfang would not discuss this matter with the two of them, but was going to bring it up at the factory office meeting.

(End of this chapter)