Start with the aviation industry

Chapter 30 Betting ([-]rd watch, please support)
Lin Feng threw out a big surprise, "Director Wu, if these two processes are combined, how about using this five-axis machine for CNC machining?"

what!
Can they be processed together?

The six lugs are processed on a milling machine, because it belongs to curved surface processing, and a model is also needed.The six through holes are processed on a drilling machine, and a drilling jig is required.

The equipment used in the two processes is different, one is a milling machine, and the other requires a drilling machine.

Affected by fixed thinking, Wu Weiqing really didn't think about merging the two processes.

"Yes, it can be merged and processed!"

Wu Weiqing's eyes lit up, and he was inexplicably surprised, "Xiaolin, thanks for reminding me that it is really possible to merge and process, which helped me solve a big problem."

It can be combined and processed. If Master Zhou wants to take a leave of absence, let him rest!
Wu Weiqing felt no pressure at all, and suddenly became happy.

Lin Feng said, "There is no problem in merging the two processes. It's just that the original processing technology will be changed in this way, and a temporary process specification is required."

The turboprop six engine is an old model, and the processing technology of each part is basically fixed. It is not impossible to change its processing technology, such as combining two processes and processing on the numerical control, but a temporary process specification must be compiled.

Temporary process regulations need to be compiled, proofread and reviewed, a total of three levels of signatures, Lin Feng does not have the time for the time being.

Wu Weiqing understood in seconds!
He said in a big way, "The compilation of the temporary process specification is on my shoulders, and you only need to write the NC machining program."

This is more awesome!
Few craft technicians get this kind of treatment.

Generally speaking, the required craftsmen do it by themselves, and write the temporary process rules seriously, that is to say, whoever is responsible for the parts is responsible for compiling the temporary process rules.

As for Lin Feng, although he was responsible for the processing of the fixed plate of the torsion measuring cylinder, he did not need to compile the temporary process regulations, and there were very few such examples.

Wu Weiqing directly approached Liu Changrong, and ordered that Liu Changrong immediately arrange for a craftsman to compile the procedure.

production site.

A large group of people were busy, and it was very lively. Even the workshop director Yan Bing came here and personally directed the workers to unpack the boxes.

This domestic CNC machine tool has been shipped to the designated location, and several workers are holding thick crowbars and are prying open the wooden boards of the packing box.

The workshop director came to the scene in person!

It can be seen the importance of this equipment!
Although it is only a domestically produced CNC, it costs several 10 yuan more, and it can be regarded as a proper key equipment in the Phoenix Factory.

"Open, open!"

Amid the cheers of some people, at least half a container-sized packing box was opened, revealing a brand new CNC machine tool.

When I got off work in the morning, the entire packing box was completely opened, and this CNC machine tool was fully displayed in front of everyone.

Lin Feng was not as enthusiastic about this newly arrived CNC machine tool as some craftsmen were, but instead focused on the fixed plate of the torsion measuring cylinder to be processed.

"Master, why don't you just take a look, I saw that Maggie stayed there almost all the time."

"No, let's talk about fixing the fixed plate first." Lin Feng replied while inputting the CNC machining program on the machine tool.

Even if the two processes are merged together, the NC program is not very long, only more than 100 lines.

After the program input is completed, the relevant preparatory work is also completed one after another, and the first piece of processing can be started soon.

Beside the machine tool, more than a dozen fixed plates of side torsion cylinders were neatly placed. Hu Lin, the team leader of the production team of large plate parts, came, followed by a worker.

Don't look at Hu Lin's appearance is big and thick, with a tough look on his face, but he is not as big and thick as he looks on the outside, but thick and thin.

The last time Turbine wanted to use this CNC machine tool for rough machining, Lin Feng rejected it, and he didn't take it seriously. No, he came here with a smile on his face.

His tone was still very kind, because he knew he would trouble Lin Feng this time, "Gong Lin, how is it going?"

Lin Feng looked relaxed, "The processing of the first piece can start within 10 minutes at most."

While answering, he directed Wang Qiang to install the first part on the workbench of the machine tool.

It can be processed immediately!
Very good!
Hu Lin said hopefully, "Gong Lin, the two processes are combined and processed together. It will take at least several hours to complete one process."

Along with Hu Lin was Kong Chengde, a worker in his 50s and [-]s. He often twists the fixed plate of the oil cylinder dry and sideways, and he is very familiar with this part.

That is, it is difficult to process, and the processing cycle is long. Each process takes several hours, and the two processes together take seven or eight hours.

"Hu Ban, I don't think it will be finished in seven or eight hours." Kong Chengde said loudly.

Hearing this, Lin Feng smiled slightly.

Paying attention to Lin Feng's smile, Hu Lin's heart moved slightly, "Gong Lin, don't you need this for a long time?"

"No, where will it take seven or eight hours, an hour or so will do."

what!
It only takes about an hour!
Are you sure you're not joking with me!

Kong Chengde said even more, "I'm afraid you are joking, for about an hour, you are lying to a child."

Apparently, he didn't know much about CNC machining. He judged CNC machining by ordinary machining, and felt that the two processes took at least seven or eight hours for ordinary machining, and it was a little incredible that CNC only took about one hour.

Lin Feng smiled and said, "Why, I don't believe it!"

Kong Chengde shook his head firmly, "I don't believe it, I wouldn't believe it even if I was killed."

Lin Feng said, "How about we make a bet and just bet 20 yuan?"

Having worked as a craft technician in the 406 workshop for nearly three years, Lin Feng certainly knew Kong Chengde, and there was still some grievances between the two of them, and Kong Chengde had been bullied several times at work before.

Kong Chengde felt that he was old and experienced, and he looked down on young craftsmen like Lin Feng at all, saying that Lin Feng didn't understand farts in front of the workers.

Lin Feng was so angry that he gritted his teeth, but there was nothing he could do.

Now is an opportunity!
Lin Feng deliberately added, "Why, don't you dare!"

Being so excited, Kong Chengde almost jumped up, "I have nothing to dare, I will lose if I can process the first piece within two hours."

Lin Feng said, "It doesn't take two hours, just one hour, plus or minus no more than 5 minutes, bet 20 yuan!"

20 yuan is also a small amount!
Kong Chengde obviously hesitated.

Seeing his hesitation, Lin Feng said aggressively, "Why, you really don't dare, I knew you didn't dare."

Kong Chengde's face was flushed, probably because he was very angry. Usually he was the only one who hated Lin Feng, but how could he have been hated by Lin Feng before? Angrily, he took out 20 yuan from his pocket, and slapped it on the work table next to the machine tool with a "snap".

"Just bet 20 yuan. If you lose and regret it, then it's my grandson."

Lin Feng burst into laughter in his heart, this idiot, I programmed the NC program, don't I know how long it will take to process it?
If there is NC programming software, the processing time will be more accurate, and the software can be accurate to the second. Now there is no programming software. As a NC programmer, you can roughly estimate the processing time.

Haha, this idiot is hooked!
Lin Feng smiled happily, and took out two "Great Unity" cards and put them on the table, and pressed down the four "Great Unity" cards with a wrench, as if he was afraid that they would run away.

…………

Thank you "Bai Yun You You Are All Floating Clouds" book friend for rewarding 1500 coins!
(End of this chapter)