Start with the aviation industry

Chapter 122 I'm running out of money
Wang Tianfang looked at it very carefully, very seriously.

just
Gradually, his brows frowned slightly, and his expression gradually became serious from the relaxed just now. He looked through it carefully, and it took a full ten minutes before he went through the import list of spare parts. .

Yes, all these spare parts need to be imported.For spare parts that can be bought in China, Lin Feng felt that there was no need to bother Phoenix Factory, and the purchasing department of the equipment branch factory could completely purchase them.

Lin Feng also noticed the change in Wang Tianfang's expression. In order not to disturb him, he kept quiet and didn't speak.

Seeing that Wang Tianfang had read the list, Lin Feng couldn't help asking, "Director Wang, do you have any questions?"

Wang Tianfang said with a serious face, "There are so many imported spare parts, even if our Phoenix Factory comes forward, we may not be able to buy them all."

That's it!

No wonder Wang Tianfang frowned slightly just now. It turned out that he was worried that he would not be able to buy all these things back 100%.

Lin Feng was also a little worried, "Then what should we do? Even if there is a lack of spare parts, our CNC broaching machine may not be able to manufacture it."

Wang Tianfang didn't say anything, but stood up, walked slowly to the window and looked outside, and after a full two or three minutes, he said, "Xiao Lin, don't worry, no matter what, even if it takes a few more trips Jingcheng, go to the superior several times to ask for help, and we will buy all these things back."

Phoenix Factory needs such a CNC broaching machine.

Even if the price was higher, even if he ran to the capital with the cheek, Wang Tianfang made up his mind to buy everything back in good condition.

Hearing this, Lin Feng was relieved a lot.

Fortunately, with the help of the Phoenix Factory, it would be difficult to buy back so many things if I relied on myself alone, with a purchasing department that had just formed three or four people.

After making up his mind to buy these things back, Wang Tianfang also asked about the progress of the design of this CNC broaching machine.

"Kobayashi, how is your design work going?"

Lin Feng replied, "The progress is very smooth. The general design drawing, electrical general drawing, and schematic diagram have all been released. The designers are starting the specific design work. The design drawings completed every day range from a dozen to as many as two. , Thirty sheets."

Wang Tianfang nodded in satisfaction, this is what he most hoped to see, and the design went smoothly, so he was relieved a lot.

He then continued to ask, "Xiaolin, how long will it take you to finish drawing all the blueprints?"

Wuyou also guessed at ease, at least half a year, at most nearly a year, such a CNC broaching machine, at least thousands of design drawings.

Who knows that Lin Feng gave him a huge surprise.

"Mr. Wang, I have made a budget. Judging from the current design progress, the design work will be completed in at most three months."

what!
It only takes three months!

Wang Tianfang looked forward to it a little bit. In this case, it won't be too long before the first CNC broaching machine is manufactured.

He once again made up his mind that he must buy back all these spare parts as soon as possible, and there must be no CNC broaching machine entering the manufacturing stage without these imported spare parts and waiting or stopping work.

Lin Feng added, "After three more years, our design work will be completed, but the manufacture of some major large parts may be advanced, such as the casting base of the machine tool, the guide rails of the machine tool and the knife box, etc."

Wang Tianfang reminded, "The design has not been fully completed, and some large parts are manufactured in advance. This is risky, and you are not afraid to take this kind of risk."

Of course Lin Feng knew what the so-called risk Wang Tianfang was talking about.

That is, it is possible that these large parts have already started to be manufactured, and design changes and changes are required, which may cause these large parts to be scrapped, thus bringing unnecessary losses.

Lin Feng said in his heart, this kind of risk does not exist, the design drawings of the entire CNC broaching machine are in my mind, all I have to do is to lead and guide the technicians to draw it out according to the gourd.

Of course, you can't say that with your mouth. Lin Feng said very politely, "Thank you, Mr. Wang, for your reminder. In order to manufacture this broaching machine as soon as possible, I think some risks must be taken."

Wang Tianfang glanced at Lin Feng approvingly. The young man is courageous and dares to think and do. He hoped that the first machine tool could be manufactured smoothly as soon as possible.

Next, Wang Tianfang asked about the design of the CNC broaching machine and some questions about future manufacturing, and Lin Feng answered them one by one.

Lin Feng sent over the list of spare parts that needed to be imported, and Wang Tianfang immediately brought the list to Sun Jiangbo for a report.

Even the Phoenix Factory specially held an office meeting to make work arrangements.

Sun Jiangbo is in charge of the import procurement of these spare parts. He personally asks questions, and the specific implementation is carried out by the deputy factory director in charge of procurement. Sun Jiangbo has repeatedly explained that all of them must be imported and purchased.

A factory leader also suggested that the manufacturing of CNC broaching machines is very risky. The total value of these parts is not low, which is hundreds of thousands. Did Lin Feng transfer the purchase money to the account of Phoenix Factory first?

Of course, Sun Jiangbo understands this truth, that is, if the manufacturing of the CNC broaching machine fails, if the Phoenix Factory pays the money in advance, it may end up in vain.

After the office meeting, Phoenix Factory expressed its intention in this regard.

Lin Feng's head is big, and he doesn't have so much money in his hands. He has no choice but to go to Sun Jiangbo to lobby for a while, and finally talked about [-], which means that Lin Feng needs to remit a total of [-] within a week. The account of Phoenix Factory.

Why is the total value of these spare parts as high as hundreds of thousands?

Because this batch of imported spare parts is not enough for one CNC broaching machine, but enough to produce several CNC broaching machines.

That is to say, Lin Feng does not have so much money, otherwise he would purchase more imported spare parts. One hundred thousand is already the maximum that can be spent, because in the future, he will need to purchase equipment for the production of CNC broaching machines and purchase Raw materials, maintaining production operations, etc., all require capital.

Still no money.

Originally, I had a total of 70 to 40 yuan, and the contracted equipment branch factory was 10,000 yuan, and now it is [-] yuan. After the money is spent, I only have [-]+ yuan left in my hand. The money needs to be carefully calculated.

Fortunately, the copyright of "Those Things in the Ming Dynasty" is in my own hands, and the monthly royalties range from tens of thousands to 10,000+.In addition, the game hall business is also good, which can bring him at least [-] to [-] yuan in income per month.

This CNC broaching machine must be produced as soon as possible. Even if it sells for 300 million units, it will be more attractive than opening a game hall, and the royalties will be drawn, and the money will come in much faster.

Today is Sunday.

The equipment branch factory is on vacation. It is estimated that only a part of the technical room is working overtime to draw the design drawings of the CNC broaching machine.

Lin Feng got up late, and visited the equipment branch factory around ten o'clock, and guided a few technicians by the way. At about 11:30, he rode a bicycle out of the Phoenix factory and went to Lin Qiong's house.

On weekends like this, Lin Feng usually eats with his sister, sometimes for lunch or dinner, and sometimes for both lunch and dinner.

(End of this chapter)