Start with the aviation industry

Chapter 12 This equipment is exclusively in charge of Lin Feng

"The lad is not bad!"

"Yes, Kobayashi is indeed very good."

The two walked out of Workshop 406 with satisfaction, talking while walking, and the content was of course related to Lin Feng.

Deng Shaoyuan jokingly said, "Tian Fang, Xiao Lin is working as a technician in your 406 workshop, why not transfer to the head office, what do you think?"

Wang Tianfang immediately realized that this was poaching, that’s not acceptable, and immediately said, “Mr. Deng, you can’t do this. It’s not easy for us to find and train an outstanding talent.”

Deng Shaoyuan laughed.

Wang Tianfang also laughed heartily.

This time, Lin Feng performed well. Not only did he embarrass Deputy Director Wang, but he also saved the leaders of workshop 406 from danger. Not only did he not receive criticism, but he was also praised.

Small meeting room.

The workshop office meeting is being held, and after discussing several topics, Yan Bing, the head of the workshop, personally proposed, "Everyone, the two or three million equipment must be fully efficient in our hands, and it cannot be left idle as a decoration. .”

Jiang Haitao immediately agreed, "Yes, Director Yan is completely correct. Although it is mainly used to process the parts of the turboshaft Bajia engine, it will take a few hours to process the imported blanks locally. Before, we could process some other parts, such as turboprop six parts, piston six parts, etc."

The views of the workshop director and the workshop technical director are basically the same, so there is not much suspense about this matter, and the matter is settled like this. Before the turboshaft Bajia imported blanks are processed locally, some other parts will be processed first. In addition to idle equipment, also train operators.

"Director, do I suggest that a dedicated technician be in charge of this equipment, or should Magee be in charge of this equipment?"

With such a question, the conference room suddenly fell silent.

Some people wondered in their hearts, should Maggie still be in charge of the imported equipment worth RMB 300 or [-] million?

the answer is negative!

Yan Bing almost didn't think about it, and didn't need everyone to discuss it at all. Instead, he decided directly, "Lin Feng is in charge of this equipment!"

A hammer!
The most expensive piece of equipment in the entire Phoenix Factory, this imported five-axis linkage CNC machining center is technically in charge of Lin Feng.

The decision of the office meeting was quickly spread to the technology room, and suddenly, many technicians were envious.

"Xiaolin, congratulations!"

"Lin Feng, you are in charge of imported equipment worth RMB 300 or RMB [-] million, which is so enviable."

"Lin Gong, this is a five-axis CNC machining center. If we have any parts that need to be processed on that equipment, you can help us."

Faced with everyone's compliments, Lin Feng smiled all over his face. He had no choice but to be happy in his heart, but he understood the basic humility and responded one by one.

"Thank you, thank you, thank you!"

"It's easy to say, easy to say, and we must fully cooperate."

The craft technology room was very lively. There was only one person with his head down, pretending to be seriously writing the craft rules, and that was Ma Ji.

He felt extremely aggrieved. Originally, this honor should belong to him, but he really didn't live up to it. The honor now belongs to Lin Feng.

Just when Maggie was aggrieved, a voice rang in his ear, "Maggie, hand over all the technical specifications of this equipment to Lin Feng."

The one who spoke was Liu Changrong, the director of the technical department. As the director of the process technology department of the 406 workshop, he can be regarded as the "middle-level cadre" of the workshop. He also attended the office meeting held by the workshop just now.

what!
Hand over all technical specifications to Lin Feng!

Ma Ji felt even more aggrieved, almost crying, but so what, he dared not disobey Director Liu's words.

So, Maggie honestly handed over all the three thick technical manuals on his desk to Lin Feng. At the beginning, when Lin Feng asked him to borrow one of them, he refused to borrow one of them like a treasure. He gave Lin Feng a hard time.

What now?
Honestly handing everything over to Lin Feng, Maggie's face was hot, and he lost all face.

Fortunately, Lin Feng was not a person who would take revenge, so he didn't seize the opportunity to embarrass Maggie, so he readily accepted the three thick technical manuals.

Lin Feng didn't think about embarrassing Maggie. What he was thinking at the moment was that although all the contents of these three technical manuals had been memorized in his mind, he was still going to read them again, and maybe he would gain something. Whether the understanding will be more comprehensive and in-depth.

Looking at the entire technology room, every technician is a big table, and it is basically empty, except for Lin Feng's big table, which is almost full of books.

Either professional books related to CNC machining, or professional books in the field of aviation industry. After having a god-level learning talent and tasting the sweetness, Lin Feng seems to be addicted to reading. Basically, he spends a few hours a day reading books, at least two , three hours, as many as five or six hours.

Seeing that Ma Ji gave all three thick technical manuals to Lin Feng, Liu Changrong continued to convey the content of the office meeting just now, "Lin Feng, the workshop decided that this two- to three-million-dollar CNC equipment will not be idle. Before the localized processing of imported blanks officially starts, some parts of other models may start to be processed on this machine tool one after another."

Of course, Lin Feng was in favor of this decision!
That's great!

I have read seven or eight professional books on CNC machining. I have read all the professional books on CNC machining that can be found in the archives of Phoenix Factory, and I want to practice it.

If you can process some other parts one after another, the things you read in the book can be used in actual processing, which will definitely be very effective in improving your CNC processing technology level.

Seeing that Lin Feng also fully agreed with this point, Liu Changrong felt relieved and continued, "In addition, considering that there are only two operators of this equipment in the workshop, the number may be a little small, so we decided to add two more workers, making a total of four operators." Workers, all of them will be brought and trained by you.”

Lin Feng jokingly said, "Director Liu, I have brought four operators in total, and I need to train them in operation. Is there any training fee?"

According to the practice of the Phoenix Factory, if the master guides the apprentices, or gives lectures to everyone, there is a training fee, which is generally quite considerable.

Liu Changrong replied straightforwardly, "Yes, why not? The monthly training fee of 20 yuan will be paid for three consecutive months in the future, and it will be directly included in your monthly salary."

20 yuan per month, a lot!
It only costs 20 cents to go to the cafeteria to eat a big meat dish, and only [-] or [-] cents for ordinary meat dishes. For [-] yuan, you can eat hard dishes, the kind of greasy ones in your mouth.

As long as you have money, this 20 yuan is really delicious!
Lin Feng became happy all of a sudden, and promised, "Don't worry, Director Liu, I will make them all trainees within 3 months, and they will be able to operate this equipment proficiently alone."

(End of this chapter)