Hand rubbing nuclear fusion live in the wilderness

Chapter 96 The Pottery Pulling Machine

Seeing all the resentment on the bullet screen, Han Yuan smiled and said, "Today and tomorrow, I will show you the complete fired porcelain!"

"From the beginning to the end, from picking materials, to modeling, to glaze, to firing, I will show you the whole process, and I promise you will enjoy watching it!"

Hearing this, the audience in the live broadcast room also became excited, and the resentment of being hung up last night was much less.

[Good guy, pottery is no longer enough to satisfy the anchor?They all started making porcelain. 】

【Wait!Get it now! 】

[Ceramics are easy to make, but porcelain is a bit difficult, right?Not warm enough?And what about your glaze? 】

[Firing pottery?I still thought what was it, what I said last night was so mysterious. 】

[Upstairs zz, porcelain and pottery are not the same thing!Moreover, firing ceramics is much more difficult, and the anchor has to glaze it, which is even more difficult! 】

There was a lot of discussion on the barrage, and Han Yuan took the shooting ball to the hardened concrete floor.

Show the audience in the live broadcast room all the materials accumulated on the ground except clay.

These materials are all he put together bit by bit these days, including tools and raw materials.

"The production of pottery is actually not very different from the production of porcelain, but the requirements for materials are higher."

"As for enamel, I've found some pure quartzite and feldspar these days."

"These two are the basic materials for making glazes. You only need to grind them to make basic glazes."

"Now let's go to the river to find clay."

With that said, he carried the bamboo poles on his back and took the hoe to the river.

I have passed by the river a lot these days, and I am already familiar with the resources by the river.

After walking down the river for about an hour, Han Yuan found his goal.

A kind of white clay, very fine, is accumulated by the long-term erosion and transportation of this small river.

Not only can this clay be used to make ceramics, but it can also be used to make refractory bricks!
This is also another goal of his today. In addition to making some ceramics, he will make a crucible to melt copper and iron.

I dug half of the white clay in the back basket, transported it back to the camp, poured it on the concrete floor, and then picked out some gravel and impurities inside.

While picking, Han Yuan said to the camera: "The quality of the clay I collected is not bad, but there are some gravel and impurities in it that need to be cleaned up."

"Actually, if you have time, you can melt the clay with water and let it sit for a few days."

"In this way, the gravel and impurities will sink to the bottom first, and then it will be better to take the sedimentary clay from the upper layer."

"But it's too time-consuming to do so, so I just choose to clean it."

It took more than ten minutes for Han Yuan to pick out the impurities from the collected white clay, and then dragged out the bench made during the stripping process.

After the bench was secured to the concrete floor, he began to integrate the tools on the floor.

Three thick discs and a thick wooden stick with diamond-shaped ends and a round middle.

The disc and wooden sticks were made by him with a wood saw two days ago, which can be used to replace the drawing machine.

There are holes in the middle of the bottom of the two discs. The difference is that one has holes on both sides, and the other two have only one side.

The two holes in the front and back of the disk with two holes are also different in shape, one hole is circular, and the other is rhombus.

The audience in the live broadcast room were very curious about these tools built by Korean Won.

Although some viewers guessed that this might be a drawing tool, they didn't know how to use these weird-looking tools.

Soon, Won told them the answer.

On this bench that was used for strips before, a hole was punched out at some point in the middle, and the two rhombus-shaped thick wooden sticks inserted from the middle were just right in size.

The purpose of the three discs is also clear.

One is the base, with the round hole facing up, and a thick and short wooden stick inserted in the middle of the hole.

The disc with holes on both sides is placed on the wooden stick, with the round hole facing down and the diamond hole facing up, and then inserted into the thick and short wooden stick.

The thick and short wooden sticks are used as support points, leaving only a gap of less than two centimeters between the two discs, just like a grinding disc, the disc on the top can be rotated at will.

The last thing to assemble is the disc on top of the bench.

Pass the pre-prepared rhombic wooden sticks through the middle of the bench, and insert one end into the rhombic holes reserved in the middle disc, and firmly embed them.

The other end is slightly protruding from the bench, and then put the last disc with a rhombus hole in it and fix it.

In this way, the rotating disc in the middle will transmit the rotational torque to the uppermost disc through the embedded wooden stick, and drive it to rotate together.

This set of assembled tools looks like the transmission shaft between the tires of a car. When the tire on this side turns, the one on the other side will also turn.

It's just that this set of tools is erected.

Such a set of simple tools can liberate the hands of the Korean won.

He only needs to straddle the pier, step on the disc in the middle with his feet, and then provide the turning force.

The hands don't need to do anything else, and can be freed up for making ceramics.

After the simple embryo drawing tool was built, the Korean Won began to make ceramics.

He took a piece of processed white clay, put it on the disk, sat on the bench, stepped on the middle disk with both feet, and the top disk started to rotate, driving the soil on the disk to start to move. turn.

A simple embryo pulling tool, the audience in the live broadcast room were amazed.

[It's still the same sentence, what the anchor's brain is made of, can be figured out. 】

[Is this automatic or manual? 】

[This should be a foot movement, right? 】

[I was still thinking about what these strange things are used for, but now that I look at it, the anchor has already thought about it! 】

【Clothes!Really convinced!The kind of clothing that throws its limbs to the ground! 】

[What is the posture of throwing five limbs to the ground? 】

(End of this chapter)