Hand rubbing nuclear fusion live in the wilderness

Chapter 125 Lathe Transformation
Everything is difficult at the beginning. After successfully manufacturing the first chrome alloy turning tool and testing the effect, Han Yuan continued to manufacture other types of turning tools.

There are many kinds of turning tools. In addition to the diamond-shaped turning blades used for turning outer circles, there are also thread turning tools, boring tools, and end face turning tools.

Even with relatively suitable chrome materials in hand, the manufacture of these knives can be described as quite complicated.

Under the condition that there is no way to melt the ferrochrome alloy, South Korea can only choose some simple and necessary turning tools to manufacture.

It took two or three days before I managed to get a few decent turning tools.

But when he thought about the later development, and the manufacture of various milling cutters for machine tools, his scalp suddenly became numb.

Milling cutters for machine tools have a much more complicated manufacturing process than turning cutters for lathes.

Apart from other things, he just couldn't get out the teeth on the milling cutter for the time being.

If it is said that some simple diamond-shaped turning tools can be forged through the forging process, then the milling cutter directly excludes the forging method.

Do you want to forge a milling cutter?

Daydreaming might be a little faster.

After thinking about it, Han Yuan shook his head vigorously to throw out the thoughts in his mind.

These things are not something he should consider now.

Now there are enough types of turning tools for him to use. As for the rest, just take it step by step and get it slowly.

With the turning tool, the audience in the live broadcast room shouted and asked if they could start making generators.

Han Yuan noticed the barrage of various inquiries on the virtual screen, shook his head and replied, "It's not as fast as everyone thinks."

"Although I have manufactured all the turning tools of the lathe, there are still many problems to be dealt with before manufacturing the generator."

The audience in the live broadcast room were puzzled and asked if there was anything else to do?
Han Yuan smiled and said: "The first thing is to redesign and redesign this simple lathe!"

Hearing this, many people in the live broadcast room were stunned.

After all, in their view, the lathe and the turning tool have already been manufactured and can be used, so why change the design?
【? ? ? 】

[Didn’t the steel pipes work well before?Looks great, doesn't it? 】

[Anchor, you can't make a generator, so you have been delaying time? 】

[It should be that the accuracy is not enough. After all, the accuracy required for the generator parts is quite high. The original lathe of the host cannot control the accuracy. 】

[Ten years later, the turner passed by again. It is really good to be able to make this simple machine tool by hand, but it is really not enough to make precision parts. The outer circle is okay, but he can't make the inner moment and curved arm. 】

[Then do it slowly, don't rush for a day or two. 】

Putting down the turning tool in his hand, Han Yuan walked towards the wooden house and said, "That's right, the accuracy of the parts is a big problem."

"Although the simple lathe I have made so far is equipped with a tool holder, the feed can be controlled manually to a certain extent, but this is far from enough."

"Not only is the precision not enough, but I can't make ball bearings with such a simple machine tool."

"Bearings are very important accessories in generators."

"Although this small thing looks unattractive, the precision required is very high, so I have to make further modifications to my lathe."

"Not only need to increase the precision, but also need to increase a certain grinding function."

Back in the cabin, Han Yuan took out the paper and spread it on the wooden table in the workshop.

I also took out the lathe drawings drawn before, and compared them, while re-conceiving and drawing sketches, setting a series of things such as the size of accessories, the number of parts, and the overall structure.

The shooting ball was suspended aside, carefully photographing the process of how he drew the drawings.

The day passed in a flash, the sun began to set, and Han Yuan drew up the drawings of the new lathe bit by bit.

Compared with the basic lathe that was drawn with two sheets of paper last time, the complexity of the drawings drawn this time has doubled several times.

Seven drawings that were one meter long and half a meter wide were used up.

After the drawings were drawn, Han Yuan finally stood up and stretched his waist. Looking at the sky, he realized that he had been sitting for a long time before he knew it.

If I had this kind of concentration when I was studying before, why worry about only passing the exam every time?

After exercising his muscles, Han Yuan spread out the drawn drawings and showed them to the audience.

However, the complex drawings and plotted figures confused most of the audience.

[I can't understand, my eyes are blurred. 】

[The anchor doesn't pretend to be that simple now, he has upgraded, and now he is pretending to be so aggressive, I can't even understand it. 】

[It's the second time I've watched the anchor draw the blueprint of the machine tool, I really want to cut his brain to see how it is done. 】

[I said that I really didn't understand the drawing on this paper, it's so complicated. 】

[This is the drawing of the double-spindle lathe?how can that be?Hand-painted drawings for a twin-spindle lathe?The coffin boards of the lathe ancestor 'Moritz' can't hold it down anymore. 】

[Double axis?Adding three axes is not a five-axis machine tool? 】

[Is this anchor really an alien? 】

Looking at the barrage, Han Yuan smiled and said, "That's right, the lathe I newly drew is a two-axis lathe."

"Compared to the previous simple lathes, this two-axis lathe should be the ultimate lathe that I can make so far."

"The structure is more complex, but the function is also more."

"But with this kind of lathe, I can manufacture the core parts of the generator, so these jobs are indispensable."

In fact, in the past, let alone drawing it, he, like most of the audience in the live broadcast room, could not understand these structural diagrams.

But after injecting that 'gene enhancement potion', he found that he could slowly figure out things that he couldn't understand, figure out, or produce before.

A two-axis lathe can do a lot of things.

But there are also many parts.

Copper-iron alloy inverted parts and processing.

Then use the old lathe to make simple threads, nuts, tool holders, feed devices, power transmission devices.

When all the parts were manufactured according to the drawings, another five days passed.

In addition, Won spent another week and a day building a concrete house across the river.

And name it 'Lathe Studio'.

The walls and floors of the studio are made of concrete, while the roof is still made of wood and palm fronds.

He didn't go to fire the roof tiles, after all, that would be too time-consuming, as long as it can keep out the wind and rain at this stage.

He got out of the studio, just to avoid the newly manufactured two-axis lathe from being rusted and oxidized for a long time in the open air, causing damage to the parts.

After all, the newly built two-axis lathe is much more precise than the previous simple lathe.

New propshafts and power transmissions have also been reworked.

In the lathe workshop, Won assembled the two-axis lathe according to the drawings bit by bit.

And try the effect.

The newly manufactured two-axis lathe has been able to cut out the middle of the round alloy and grind it out.

In other words, he can manufacture the outer ring structure of the bearing through a two-axis machine tool.

This is a big revolutionary step, and the excited Korean won was full that night.

Only by being able to manufacture bearings can he manufacture generators.

Without bearings, everything is utopian.

(End of this chapter)