Hand rubbing nuclear fusion live in the wilderness

Chapter 112

As the water wheel turns, the extended blades continuously deliver air into the molten pool, and the charcoal in the molten pool burns violently, and the temperature continues to rise.

Leopard [-] and Leopard [-], who were still playing around, ran away.

It's too hot, if you don't run, you will become a little barbecue leopard.

The iron ingot in the crucible was heating, and Han Yuan placed some iron ingots into the molten pool, and then began to make molds with mud.

The molds for the inverted convex iron tiller hammer and the base have been made, and he is now making molds for other tools.

Such as rough-mouthed iron pliers, iron scissors, big hammer, steel plate, etc.

Now that iron smelting has started, let's make more things at once, so that they won't be used later.

The molds of these things can be made with ordinary clay, and the accuracy is not very high, just enough.

After all, these things are not like the generators at the back, which require precision, and if there is a deviation, problems may arise.

In the molten pool, the orange-yellow and bright charcoal fire was burning fiercely. When the mold was ready, Han Yuan put on the cowhide protective gear, endured the high temperature and carefully pushed open the lid on the crucible to take a look.

The pig iron inside has already begun to melt, but it will take some time before it is completely melted into molten iron.

After waiting for a while, Han Yuan picked out the crucible far away with two long wooden sticks when he felt that it was about the same.

The crucible manufactured this time has curved ears on both sides, which is also for convenience.

After all, the temperature of the molten pool is too high, even wearing cowhide protective gear standing two or three meters away can still feel the heat.

Thanks to his strength attribute tripled, otherwise how to take out the crucible from the molten pool would be a problem.

The two wooden sticks ignited shortly after touching the crucible ears. Han Yuan picked up the crucible ears and assisted with iron tongs to quickly pour the molten iron in the crucible into the previously inverted mold.

The first thing to pour is the base. After picking out two crucibles of molten iron, wait for the molten iron in the mold to cool down slightly, and then clamp out the red pig iron ingot that was burning in the molten pool and put it into the mold.

To put it bluntly, the base is a large piece of iron, but it would be too time-consuming to make it all with molten iron.

Therefore, Won chose to add iron ingots while pouring molten iron, which can greatly save time.

Four furnaces of molten iron, plus some pig iron ingots, this is the material of the base, pure pig iron.

After the base is inverted, the charcoal fire in the molten pool is still burning.

Won then added charcoal to the molten pool to make other tools.

It took a whole day to burn all the charcoal refined in the previous two days, and finally poured out some of the things needed.

After one night, the iron in the mold was cooled, and the iron base and protruding iron rudder weighing hundreds of kilograms were installed and fixed on the pestle.

everything's ready,
The two concrete slabs on the dam opened, and the water wheel slowly began to turn.

The sturdy pick rod raised the pestle, and the protruding iron rudder hammer weighing more than 150 catties was picked up, and then hit heavily on the iron base.

In the molten pool, the red-hot pig iron ingot was firmly clamped by the Korean won with iron tongs, and then placed on the base and began to beat.

The protruding hammer rises and falls with the rotation of the water wheel. Every time it hits, the pig iron ingot becomes thinner and flatter at a speed visible to the naked eye.

The iron tongs fixed the iron ingot and turned it back and forth, and it didn't take long for a pig iron ingot to be processed into a long and narrow piece of iron.

The pig iron ingot in his hand was forged into a thin iron sheet, and after being thrown into the river to cool, Han Yuan picked up the long and narrow thin iron sheet and showed it under the camera, saying:
"Advances in technology can greatly improve production efficiency. In less than 10 minutes, a thick iron ingot is forged into a thin iron sheet under the forging of a hydraulic forging machine."

"Instead of hitting it with a hammer in the past, such a piece of iron can't be hammered out in less than a day."

"I don't know if you have any doubts about the use of water power?"

Although they knew that Han Yuan was pretending to be aggressive, most of the audience in the live broadcast room praised him one after another.

Because from materials to finished products, from wilderness survival to hydraulic mechanization, they watched step by step.

[999, six times over! 】

[This effect is really awesome! 】

【Relying on manpower, it takes at least seven or eight hours to hammer a piece of pig iron into an iron sheet. With this kind of water power, I just timed it. Excluding the reheating time, it took a total of 8 minutes and 42 seconds to hammer. 】

[The efficiency has been greatly improved. 】

[This kind of thing existed in the Han Dynasty of our country. In the past, there were several iron and steel factory sites in the Han Dynasty that had unearthed gear machinery. It is a pity that the Qing Dynasty destroyed my Great Chinese civilization. 】

[This thing is simply not comparable to a hydraulic forging machine, which can forge steel plates in one go. This thing is not good, and it has to be hammered so many times. 】

[Upstairs, can you go up?Don't go? 】

[Let’s go step by step. To build a hydraulic forging machine, you also need materials. 】

After processing and assembling some ironware made by pouring molten iron before, the Korean Won put down the concrete slab to block the water flow, and the water wheel stopped turning.

He is still very satisfied with the dams and vertical water wheels that he has spent a lot of time building.

But if there are any flaws, it is that in the case of one person, it is not convenient to control his start-stop control.

But it will be remodeled later.

In addition, studios will also be set up on both sides of the river bank.

One is that it can work even in rainy days.

Another one prevents rust damage to exposed ironwork.

After forging a thin iron sheet and demonstrating the power of the hydraulic forging machine, it was already evening.

The work behind won has been arranged and planned.

While packing up tools and materials, he said: "The hydraulic blower and hydraulic forging machine have been manufactured. I believe everyone has a certain understanding of the use of hydraulic power."

"However, this is only the most basic application. In the next time, I will use a blower and a forging machine to create a simple machine tool."

"In industrialization, I don't need to say more about the role of machine tools."

"If modern civilization is compared to a person, all kinds of raw materials are food, and machine tools are the stomach!"

"Only through the processing of various machine tools, various raw materials can be transformed into corresponding nutrients and transported to all parts of the human body, and the human body is composed of structures."

"However, the manufacture of machine tools is much more difficult than the manufacture of blowers and forging machines. Even if it is a simple one, the complexity is not at the same level."

"Gears, steel pipes, drive belts, bed saddles, propulsion columns and most importantly knives! These are all extremely troublesome things,"

"I'm ready to spend the next month, maybe two months on this."

　The second update was delivered, and I broke my promise for the third update today.

　　There is a power outage at home!
　　Gan!
　　The electricity bill I paid on August 600nd was 900 yuan, more than [-] kilowatt-hours, forty days, gone! ! !

　　Can you believe it?I can't believe it myself.

　　People are numb.

　　I coded the second update at an Internet cafe.
　　
　
(End of this chapter)