1991 Starting from the core

The "shared bicycles" launched by the administrative department are very popular among employees, but there is a problem - bicycles parked in the open air can easily cause damage to the seat cushions and rust on the steel rims. Therefore, in order to facilitate parking, the administrative department built several carports outside the office building, accommodation building and several laboratories.

It is nominally a carport, but because it is so beautifully built, people think it should not be called a carport, but an umbrella pavilion.

——Because there are countless "shared umbrellas" hanging under it that can be taken at will.

These small measures give the entire science and technology park a warmth that transcends the times.

Saying goodbye to Xiaoding, Su Yuanshan rode his bicycle to the optical laboratory.

The identity of the guests who came today is very unusual. They are people from the Precision Instrument and Equipment R\u0026D Center of the Institute of Optoelectronics, Chinese Academy of Sciences and the Department of Mechanical and Electronics of Tsinghua University.

According to the specifications of the visitors, they should be greeted by Su Yuanshan or Xi Xiaoding in person to be worthy of their status. However, according to the structure of Yuanxin, their corresponding unit should be the industry-university-research department, and that happened to be Professor Su Xinghe's mouth. Therefore, Professor Su Xinghe, who was too busy, asked Qi Youguang, the doctoral student he was currently leading, to take his place and work with him. Zheng Zhenchuan and the others took the people to Yuanxin together.

And the most important thing is that Su Yuanshan knows what these two units want to do...

He needs to set the stage.

…

Entering the optical laboratory, Su Yuanshan first said hello to a few familiar researchers, and then called Zheng Zhenchuan. After learning that they were in the conference room on the sixth floor, he went straight upstairs.

In the conference room, Zheng Zhenchuan, Zhao Kaidong, and Qu Hui, who had just returned from Ni Country, were gathered together. In addition, there were three unfamiliar faces.

Nowadays, Zheng, Zhao, and Qu Hui have become the "big three" of Yuanxin's "cooperation sub-base", and they regard Yuanxin as their own. Especially Qu Hui, she never considered herself an "outsider".

"President Shan is here." Qu Hui sat at the door, spotted Su Yuanshan first, and said hello to him.

Bingxue was smart and knew that if she called Su Yuanshan "Mr. Shan" at this time, Su Yuanshan would definitely understand what she meant.

Su Yuanshan also smiled and nodded: "Hello, Dr. Qu, Gong Zheng, Gong Zhao, how are you?"

Zheng Zhenchuan and Zhao Kaidong looked at each other and thought that Su Yuanshan was really not a fuel-efficient guy. They smiled immediately and did not expose him. They nodded and introduced to Su Yuanshan: "Introduce to Mr. Shan, this is from the Precision Instrument Center of Changguang Institute." Director Li Keqing and Professor Xiao Yang from the Department of Mechanical and Electrical Engineering at Tsinghua University.”

"Hello, Director Li, hello Professor Xiao, hello Dr. Liu." Su Yuanshan stepped forward quickly, shook hands with the three people who stood up, and said with a smile: "Welcome."

"Haha, Mr. Shan is young and promising!" Li Keqing was in his early fifties. Although his head was surrounded by the Mediterranean Sea, he didn't mind at all. Unlike those officials who had to leave a long hair on the side and then turn it over to cover it. He shaved his hair into short hair, and it looked a bit like the light of wisdom.

"Director Li is so complimentary." Su Yuanshan chuckled and said, "Please take a seat."

"Well, okay. Let's stop talking nonsense... You should have received the opinions of the Mechanical and Electrical Department, right? How does Yuanxin consider this?"

"We..." Su Yuanshan sighed softly.

The arrival of these three people is a long story.

A year ago, Su Yuanshan proposed an idea to Zheng Zhenchuan, which was to transform the workpiece stage of the lithography machine and work towards a double workpiece stage.

Zheng Zhenchuan's reply was that the Chinese Academy of Sciences was very interested in this transformation, and then asked the Precision Instrument Research Center of Changguang Institute to try it.

Later, after working on the Precision Instrument Research Center for several months, I found that I couldn't figure it out, so I roped in the Department of Mechanical and Electronics of Tsinghua University to form a joint research team...

And then... they actually started to figure it out!

At the very least, they have overcome the difficulties in principle and found the design idea.

Now that the difficulties have been overcome, the next step is to complete the design and then conduct engineering testing.

After years of continuous industry-university-research promotion by Yuexin, whether it is Tsinghua University or Changguang Institute of Light, we have long known that this technology cannot just stay on paper or in the laboratory - especially the idea of ​​a double workpiece stage. , it is even the world’s leading idea at this moment!

So of course the sooner the technology is completed and launched into the market, the better.

But to launch it on the market, at this stage, it is almost impossible to rely solely on the Precision Instrument Research Center and Tsinghua University. To put it bluntly, it’s not even fun to create an engineering prototype.

Now everyone knows that lithography machines have long become a project dominated by Yuexin, which is desperately spending money, and the state is providing technical reserve guidance. Technologies related to lithography machines cannot bypass the remote core.

Therefore, they came here just to win over Yuan Xin. To be precise, they were eyeing the Yamazaki Mazak machine tool that Yuanxin imported from Niguo.

For this four-axis mother machine, it is only an exaggeration for Su Yuanshan to say that he had to waste all his efforts, but it is indeed hard-won - it is the most advanced CNC machine tool currently available in China, and it is also the most expensive.

Of course, Su Yuanshan did not buy it in the name of Yuanxin, but asked Sun Xihui to buy it back.

Su Yuanshan knew that after passing this village, there would be no such store.

The so-called opinion of the Electrical and Mechanical Department is that it hopes that Yuanxin can... fully "use" the purchased equipment.

…

"We have received the opinions of the Electrical and Mechanical Department, and in principle, we still agree."

Su Yuanshan spoke in a moderately official tone and talked about principles.

He knew the purpose of these two companies - they just wanted to get Yuanxin to set up a precision instrument factory, and they also wanted Yuanxin to be taken advantage of.

Su Yuanshan didn't mind being the leader, but in business, it was okay to pay, but not to take advantage of the leader.

Even the mechanical and electrical department won't do it.

"Agree in principle...how to say?" Director Li looked at Su Yuanshan with a smile.

"Let's put it this way, Director Li. We want to see your real progress and use this to decide whether it makes sense for us to continue to cooperate."

Su Yuanshan spread his hands and said frankly: "You have to know that Yuanxin spent a lot of money this year and wasted a lot of money."

Qu Hui on the side coughed lightly.

Director Li and the other three also smiled slightly.

Speaking of cheating, it seems that some of the people here, Zheng Zhenchuan, Zhao Kaidong, Qu Hui... one by one... seem to be cheating!

Moreover, their Precision Instrument Research Center and Tsinghua University have never spent Su Yuanshan’s money before!

When Su Yuanshan heard Qu Hui cough, he knew that what he said was a bit off... He quickly smiled and said: "Well, as a metaphor, the main thing is that Yuanxin is still relatively poor."

"The landlord's family doesn't have enough food left!" Su Yuan sighed.